Point-to-Surface Pounding of Highway Bridges with Deck Rotation Subjected to Bi-Directional Earthquake Excitations

Post-earthquake survey of several strong earthquakes demonstrated that pounding between the neighboring civil infrastructures, such as building and highway bridge, would induce significant structural damage, even collapse, of the structures. This article presents a pounding experiment of highway bridge, especially focused on the point-to-surface pounding of bridge decks due to torsional rotation, when subjected to extreme bi-directional earthquake excitations. To experimentally investigate the point-to-surface pounding between the neighboring bridge segments, a base-isolated highway bridge model, in which the mass centers of the bridge decks do not strictly coincide with the corresponding stiffness centers, is manufactured. A series of shaking table tests of the highway bridge model are carried out for the structural model with large and small separations of the expansion joint to investigate the dynamic responses of the bridge model with and without including the pounding effects, respectively. An analytical model of the highway bridge, in which the point-to-surface pounding is represented by using a modified contact-friction element, is also established based on the lump mass model with three degrees of freedom for each segment. Based on the test results, the model parameters of the modified contact-friction element are identified, and the analytical responses of the highway bridge model with pounding effects are compared with the experimental data. The results show that the highway bridge is vulnerable to the deck rotation, and point-to-surface pounding should be considered in the structural design to lighten the pounding damage of the highway bridge under strong earthquake excitations.