MODELLING OF RC BEAM-COLUMN JOINTS AND STRUCTURAL WALLS |
| |
Authors: | M. YOUSSEF A. GHOBARAH |
| |
Affiliation: | Department of Civil Engineering , McMaster University , Hamilton, Ontario, Canada |
| |
Abstract: | The deformation of beam-column joints may contribute significantly to drift of reinforced concrete (RC) frames. In addition, failure may occur in the joints due to cumulative concrete crushing from applied beam and column moments, bond slip of embedded bars or shear failure as in the case of existing frames with nonductile detailing. When subjected to earthquake loading, failure in RC structural wall is similar to failure of frame joints as it may occur due to cumulative crushing from high flexural stresses, bond slip failure of lap splice, shear failure or a combination of various mechanisms of failure. It is important to include these behavioural characteristics in a simple model that can be used in the analysis of RC frames and RC walls to predict their response under earthquake loading and determine their failure modes. Global macro models for the beam-column joint and for RC structural walls are developed. The proposed models represent shear and bond slip deformations as well as flexural deformations in the plastic hinge regions. The models are capable of idealising the potential failure mechanism due to crushing of concrete, bond slip or shear with allowance for the simultaneous progress in each mode. The model predictions are compared with available experimental data and good correlation is observed between analytical results and the test measurements. |
| |
Keywords: | Beam-column joints bond slip concrete crushing failure mode global model hysteretic behaviour reinforced concrete shear failure structural wall |
|
|