Seismic Performance of Precast Hybrid-Steel Concrete Connections |
| |
Authors: | Bing Li Sudhakar A. Kulkarni Chee Lai Leong |
| |
Affiliation: | 1. School of Civil and Environmental Engineering , Nanyang Technological University , Singapore cbli@ntu.edu.sg;3. School of Civil and Environmental Engineering , Nanyang Technological University , Singapore |
| |
Abstract: | This article presents experimental and analytical investigations of hybrid-steel concrete connections. In the experimental study, four full-scale specimens including one cast-in-place and three precast specimens were tested under cyclic load reversals. The performance of the specimens in terms of energy dissipating capacity, cracking patterns, and variation of strains along the main reinforcement is described. However, due to the inherent complexity of beam-column joints and the unique features of the tested specimens, the experimental investigation was not sufficient enough to fully understand the influence of several parameters. Therefore, an analytical investigation based on the FE models using DIANA software is presented. Validation of the FE models against the experimental results has shown a good agreement. The critical parameters influencing the joint's behavior such as the continuation of beam bottom reinforcement, column axial load, the size and embedded length of the angle sections are varied, and their effects including possible implications on code specifications are discussed. |
| |
Keywords: | Finite Element Hybrid-Steel Concrete Material Nonlinearity Cyclic Loading Geometric Nonlinearity Hysteresis Loops |
|
|