Experimental Study on Postponing the Deboning of FRP Sheets in Masonry Walls |
| |
Authors: | Mehran Emami Mohammad R Eftekhar |
| |
Institution: | Department of Civil Engineering, Isfahan University of Technology (IUT), Isfahan, Iran |
| |
Abstract: | ABSTRACTA large number of buildings all around the world are constructed of unreinforced masonry. These structures do not act well during earthquakes because of their vulnerable behavior. In last two decades, fiber-reinforced polymers (FRPs) has been used widely in seismic rehabilitation and strengthening unreinforced concrete and masonry structures. One important issue in using FRP composites for strengthening masonry walls is the inopportune debonding of composites from the wall surface; thus, in this article new methods are proposed to further delay the mentioned debonding issue. For this purpose, 13 masonry panels with 100x870x870 mm dimension are strengthened by using carbon and glass FRPs (CFRPs and GFRPs). A variety of strengthening methods such as surface preparation, boring, grooving, nailing, and plaster are used to mount FRP composites to the walls. For each specimen subjected to diagonal compression test, the loading level along with tensile and compressive diagonal displacements are evaluated. In order to assess the effect of FRP composites, four unreinforced masonry walls are tested as well. The results show 110% increase in ductility index of reinforced specimens compared to the unreinforced ones. |
| |
Keywords: | Boring method debondingductility index FRP composites Grooving method (GM) Masonry walls |
|
|