Flexural Behavior of Typical Chinese Traditional Timber Stitching Beams |
| |
Authors: | Qing Chun Koenraad Van Balen Jianwu Pan |
| |
Affiliation: | 1. Key Laboratory of Urban &2. Architectural Heritage Conservation, Ministry of Education, Southeast University, Nanjing, PR China;3. State Key Laboratory of Subtropical Building Science, South China University of Technology, Guangzhou, PR China;4. Department of Civil Engineering, Katholieke Universiteit Leuven, Leuven, Belgium;5. Civil Engineering Department, Nanjing University of Aeronautics and Astronautics, Nanjing, PR China |
| |
Abstract: | In Chinese traditional timber buildings, stitching is very common. When the bearing capacity or the rigidity is inadequate, a timber beam is often strengthened with another beam using the stitching method. The timber stitching beams are mainly of two types—the small-top/big-bottom type and the big-top/small-bottom type. To study the bending behavior of these two types of timber stitching beams, including the failure mode, the flexural capacity, the strain distribution at mid-span section, and the maximum deflection, bending tests are carried out on 14 timber stitching beams with Chinese traditional conformation for seven pine beams and seven fir beams. The results show that the failure modes of the small-top/big-bottom type of stitching beams all show brittle fractures at the bottoms of the bottom beams. The failure modes of the big-top/small-bottom type of stitching beams all show brittle fractures at the bottoms of the top beams. The distribution of section strain along the height of each part of the beam basically obeys plane hypothesis. Based on the theoretical and experimental analysis, the calculation formulas of flexural capacity and maximum deflection of these two types of timber stitching beams made of pine and fir are presented. |
| |
Keywords: | Chinese traditional timber building stitching beam flexural capacity plane hypothesis maximum deflection |
|
|