Seismic constraints on the effects of gas hydrate on sediment physical properties and fluid flow: a review

The formation of gas hydrates in marine sediments changes their physical properties and hence influences fluid flow. Here, we review seismic indicators of gas hydrates and relate these indicators to gas hydrate formation and fluid migration. Analyses of seismic data from sediments containing gas and gas hydrates in a variety of locations have shown that the characteristic bottom‐simulating reflector (BSR), which commonly marks the hydrate phase boundary is caused mainly by the presence of gas beneath the gas hydrate stability zone (GHSZ). The amplitude of the BSR is also dependent on the hydrate concentration and on the porosity of the sediment. The presence of gas hydrate alters the elastic properties of sediments, particularly if it cements sediment grains. However, multifrequency studies in various geological provinces show that any loss of reflectivity or blanking observed within the GHSZ is dependent on both the nature of the sediments and concentration of hydrate present. Gas beneath the BSR may cause amplitude anomalies and may result in bright spots and enhanced reflections. The presence of gas beneath the BSR is the primary cause of observed amplitude versus offset (AVO) anomalies, but the amplitude of these anomalies is also dependent on the amount of cementation brought by the gas hydrates within the GHSZ. Fluid migration appears to play an important role in the formation and dissociation of gas hydrates in both active and passive margin settings. Fluid migration in accretionary prisms influences hydrate accumulation and may therefore control the spatial distribution of BSRs. Fluid migration may influence also the type of hydrate formed by bringing thermogenic gas containing higher order hydrocarbons to the GHSZ from below. Fluid advection may cause local dissociation of gas hydrates by bringing heat from below, thus shifting the gas hydrate phase boundary. Fluid flow within the GHSZ is limited by the formation of hydrate in the pore space, which reduces the permeability of the sediment. Features such as pockmarks, acoustic masking and acoustic turbidity are indirect indicators of fluid flow and identification of these features in seismic sections within and beneath the GHSZ may also suggest the formation of gas hydrate.