Simulation of the impact of faults on CO2 injection into sandstone reservoirs

Numerical simulations of multiphase CO₂ behavior within faulted sandstone reservoirs examine the impact of fractures and faults on CO₂ migration in potential subsurface injection systems. In southeastern Utah, some natural CO₂ reservoirs are breached and CO₂‐charged water flows to the surface along permeable damage zones adjacent to faults; in other sites, faulted sandstones form barriers to flow and large CO₂‐filled reservoirs result. These end‐members serve as the guides for our modeling, both at sites where nature offers ‘successful’ storage and at sites where leakage has occurred. We consider two end‐member fault types: low‐permeability faults dominated by deformation‐band networks and high‐permeability faults dominated by fracture networks in damage zones adjacent to clay‐rich gouge. Equivalent permeability (k) values for the fault zones can range from <10^?14 m² for deformation‐band‐dominated faults to >10^?12 m² for fracture‐dominated faults regardless of the permeability of unfaulted sandstone. Water–CO₂ fluid‐flow simulations model the injection of CO₂ into high‐k sandstone (5 × 10^?13 m²) with low‐k (5 × 10^?17 m²) or high‐k (5 × 10^?12 m²) fault zones that correspond to deformation‐band‐ or fracture‐dominated faults, respectively. After 500 days, CO₂ rises to produce an inverted cone of free and dissolved CO₂ that spreads laterally away from the injection well. Free CO₂ fills no more than 41% of the pore space behind the advancing CO₂ front, where dissolved CO₂ is at or near geochemical saturation. The low‐k fault zone exerts the greatest impact on the shape of the advancing CO₂ front and restricts the bulk of the dissolved and free CO₂ to the region upstream of the fault barrier. In the high‐k aquifer, the high‐k fault zone exerts a small influence on the shape of the advancing CO₂ front. We also model stacked reservoir seal pairs, and the fracture‐dominated fault acts as a vertical bypass, allowing upward movement of CO₂ into overlying strata. High‐permeability fault zones are important pathways for CO₂ to bypass unfaulted sandstone, which leads to reduce sequestration efficiency. Aquifer compartmentalization by low‐permeability fault barriers leads to improved storativity because the barriers restrict lateral CO₂ migration and maximize the volume and pressure of CO₂ that might be emplaced in each fault‐bound compartment. As much as a 3.5‐MPa pressure increase may develop in the injected reservoir in this model domain, which under certain conditions may lead to pressures close to the fracture pressure of the top seal.