‘Rid grasse of bones’: A taphonomic study of the bones from midden deposits at the Neolithic and Bronze age site of Runnymede,Surrey, England

Runnymede has large samples of Neolithic and Late Bronze Age animal bones, with contrasting preservation conditions in both periods. The bone evidence has been used to interpret the formation of the site deposits. There are few articulated bones, and no joins were found in butchered bone, indicating that the area studied did not contain primary refuse. Various aspects of bone alteration have been analysed: (i) the proportion of bones with very good surface preservation was high in the in situ Neolithic excavation units and the basal Bronze Age midden, but bones in the upper units were mostly eroded. These units are reworked flood deposits. The greater degree of fragmentation of the bone in the reworked units has been quantified, using a system of recording the ‘zones’ present on each bone, which allows calculation of the fraction present. It is also demonstrated that the reworked units contain a lower proportion of identified bones and a higher proportion of teeth and iaws than the units with well-preserved bone, (ii) Quantification of canid gnawing shows, unexpectedly, that more was recorded on well-preserved bone. Thus recognition of gnawing depends on bone condition. This also confirms that most of the erosion of the bone surface is a post-depositional phenomenon. The sequence of activities is therefore interpreted as follows: meat was cooked and consumed, and the bones discarded for the dogs. At a later stage, larger bones were picked up and thrown away in the river or midden. Some ethnographic examples of periodic cleaning of farming settlements are cited.     

In situ Measurements of Oxygen Dynamics in Unsaturated Archaeological Deposits

Oxygen is a key parameter in the degradation of archaeological material, but little is known of its dynamics in situ. In this study, 10 optical oxygen sensors placed in a 2 m deep test pit in the cultural deposits at Bryggen in Bergen have monitored oxygen concentrations every half hour for more than a year. It is shown that there is a significant spatial and temporal variation in the oxygen concentration, which is correlated to measured soil characteristics, precipitation, soil water content and degradation of organic material. In these deposits oxygen typically occurs when the air content of the soil exceeds 10–15% vol, while oxygen dissolved in infiltrating rainwater is of less importance for the supply of oxygen in the unsaturated zone.     

Precipitation of lead–zinc ores in the Mississippi Valley‐type deposit at Trèves,Cévennes region of southern France

The Trèves zinc–lead deposit is one of several Mississippi Valley‐type (MVT) deposits in the Cévennes region of southern France. Fluid inclusion studies show that the ore was deposited at temperatures between approximately 80 and 150°C from a brine that derived its salinity mainly from the evaporation of seawater past halite saturation. Lead isotope studies suggest that the metals were extracted from local basement rocks. Sulfur isotope data and studies of organic matter indicate that the reduced sulfur in the ores was derived from the reduction of Mesozoic marine sulfate by thermochemical sulfate reduction or bacterially mediated processes at a different time or place from ore deposition. The large range of δ³⁴S values determined for the minerals in the deposit (12.2–19.2‰ for barite, 3.8–13.8‰ for sphalerite and galena, and 8.7 to ?21.2‰ for pyrite), are best explained by the mixing of fluids containing different sources of sulfur. Geochemical reaction path calculations, based on quantitative fluid inclusion data and constrained by field observations, were used to evaluate possible precipitation mechanisms. The most important precipitation mechanism was probably the mixing of fluids containing different metal and reduced sulfur contents. Cooling, dilution, and changes in pH of the ore fluid probably played a minor role in the precipitation of ores. The optimum results that produced the most metal sulfide deposition with the least amount of fluid was the mixing of a fluid containing low amounts of reduced sulfur with a sulfur‐rich, metal poor fluid. In this scenario, large amounts of sphalerite and galena are precipitated, together with smaller quantities of pyrite precipitated and dolomite dissolved. The relative amounts of metal precipitated and dolomite dissolved in this scenario agree with field observations that show only minor dolomite dissolution during ore deposition. The modeling results demonstrate the important control of the reduced sulfur concentration on the Zn and Pb transport capacity of the ore fluid and the volumes of fluid required to form the deposit. The studies of the Trèves ores provide insights into the ore‐forming processes of a typical MVT deposit in the Cévennes region. However, the extent to which these processes can be extrapolated to other MVT deposits in the Cévennes region is problematic. Nevertheless, the evidence for the extensive migration of fluids in the basement and sedimentary cover rocks in the Cévennes region suggests that the ore forming processes for the Trèves deposit must be considered equally viable possibilities for the numerous fault‐controlled and mineralogically similar MVT deposits in the Cévennes region.     

Recent Storm Boulder Deposits on the Beecroft Peninsula,New South Wales,Australia

This paper documents the deposition of large boulders on the Beecroft Peninsula, New South Wales, during a one in four‐year swell event in October 1999. The size of the boulders in relation to the magnitude of the swell suggests that the boulder field at Whale Point on the Beecroft Peninsula is explicable in terms of storm swells alone.     

Magmatic fluids immiscible with silicate melts: examples from inclusions in phenocrysts and glasses, and implications for magma evolution and metal transport

The first occurrence of immiscibility in magmas appears to be most important in the magmatic–hydrothermal transition, and thus studies of magmatic immiscibility should be primarily directed towards recognition of coexisting silicate melt and essentially non-silicate liquids and fluids (aqueous, carbonic and sulphide). However, immiscible phase separation during decompression, cooling and crystallization of magmas is an inherently fugitive phenomenon. The only remaining evidence of this process and the closest approximation of natural immiscible magmatic liquids and vapours can be provided by melt and fluid inclusions trapped in silicate glasses and magmatic phenocrysts. Such inclusions are often used as a natural experimental laboratory to model the process of exsolution and the compositions of volatile-rich phases from a wide range of terrestrial magmas. In this paper several examples from recent research on melt and fluid inclusions are used to demonstrate the significance of naturally occurring immiscibility in understanding some large-scale magma chamber processes, such as degassing and partitioning of metals.     

Experiments in Cross‐Scalar Labour Organizing: Reflections on Trade Union‐Building Work in Aceh after the 2004 Tsunami

Abstract: As part of the post‐tsunami reconstruction effort in Aceh, international labour movement organizations “jumped scale” in an attempt to revitalize a moribund local labour movement. This article provides a close analysis of the four internationally sponsored trade union building projects undertaken as part of that process. This unique intervention sheds light on the crucial role of local context and the extent to which the principles of international solidarity and the pragmatics of trade union diplomacy are mediated through money, institutions, individuals and day‐to‐day activities. The Aceh case underscores the importance of contingency and the agency of individuals in shaping an international intervention of this kind. In doing so it demonstrates how circuits of labour activism can be affected by constraints and opportunities unrelated to trade union politics or the relations of production.     

On the Possible Origins of an Unusual (Mid to Late Holocene) Coastal Deposit,Old Punt Bay,South‐East Australia

An unusual coarse, shelly sedimentary unit is found elevated above present mean sea level in a sheltered pocket embayment at Old Punt Bay in south‐eastern Australia. The coarse sediments, diverse microfauna, and large shelly macrofauna of mixed affinity suggest that the deposit is the result of high‐energy deposition. The deposit was previously thought to have been deposited 1000–1300 cal bp based on one shell dated using ¹⁴C and amino acid racemisation. However, additional ¹⁴C dating indicates a likely age of ～2500 cal bp . Regardless of age constraints, the presence of rock‐encrusting oyster shells and large articulated bivalves, suggests that the depositional event must have been capable of removing and transporting coarse sediments (rock clasts), bivalves, and oysters shells from a variety of seaward environments and depositing them with little abrasion, something storm waves are unlikely to do. The deposit may be tsunamigenic. If a tsunami origin is accepted, the new dating results indicate that it is possibly coeval with a tsunami event previously reported to have affected several other sites along the coast of New South Wales at c. 2900 cal bp . Consequently, this deposit provides evidence for the event at a new site and importantly, a tighter constraint on the likely date of the events occurrence. It further adds weight to the developing catalogue of palaeotsunamis that may have affected the south‐eastern coast of Australia. Regardless of the deposit's origins, if viewed from a coastal planning perspective, this deposit indicates that this part of the coast has experienced large‐scale overwash events in the past that if repeated, would be catastrophic. There are serious implications for risk management.     

Confirmation of a Middle Jurassic age for the Eedemt Formation in Dundgobi Province,southeast Mongolia: constraints from the discovery of new spinicaudatans (clam shrimps)

Two spinicaudatan species, Triglypta eedemtensis Li sp. nov. and Dundgobiestheria mandalgobiensis Li gen. et sp. nov., are described on the basis of scanning electron microscopy (SEM) imaging of newly collected specimens from paper-thin laminated black shale of the Eedemt Formation exposed at the Eedemt locality in the Khootiin Khotgor coal mine region of Dundgobi Province in southeast Mongolia. Triglypta eedemtensis is ornamented mainly with puncta and a punctate fine reticulum; radial lirae occur only on two or three growth bands near the venter. The small spinicaudatan Triglypta is a common component of the Middle Jurassic Euestheria ziliujingensis fauna and Sinokontikia fauna, and is a typical taxon in the Middle Jurassic lacustrine sequences of northern Hebei and the Junggar and Turpan basins of the Xinjiang Autonomous District of China; however, it does not occur in stratigraphically higher units elsewhere. Therefore, the age of the Eedemt Formation should be considered Middle Jurassic rather than Early Cretaceous. The Eedemt Formation is much older than the Early Cretaceous Shinekhudag Formation in the Shine Khudag area of southeast Mongolia.     

An Assessment of the Status and Condition of Archaeological Remains Preserved In Situ in the Medieval Town of Trondheim Based on Archeochemical Investigations Conducted During the Period 2007–2010

Abstract

In recent years systematic archeochemical investigations in the medieval town of Trondheim have provided the heritage management authorities with a rich and complex set of data concerning the status and condition of the cultural deposits in the anthropogenic material. The collected data raises important questions for the long-time management of in situ preservation for archaeological material in non-saturated zones. In this paper we present the standardized scientific methods used in these archeochemical investiga- tions. We examine the results from several sites in the town and discuss the challenges facing modern heritage management in its efforts to protect a complex body of archaeological material in the non-saturated zone. We show that sediments with a thickness of 1–2 m have low levels of moisture and organic matter, and most of the inorganic parameters analysed are found in oxidized form with low preservations. The 2–3 m thick anthropogenic sediments showed better preservation conditions.     

SOIL DAMPING FORMULATION IN NONLINEAR TIME DOMAIN SITE RESPONSE ANALYSIS

Nonlinear time domain site response analysis is used to capture the soil hysteretic response and nonlinearity due to medium and large ground motions. Soil damping is captured primarily through the hysteretic energy dissipating response. Viscous damp-ing, using the Rayleigh damping formulation, is often added to represent damping at very small strains where many soil models are primarily linear. The Rayleigh damping formulation results in frequency dependent damping, in contrast to experiments that show that the damping of soil is mostly frequency independent. Artificially high damp-ing is introduced outside a limited frequency range that filters high frequency ground motion. The extended Rayleigh damping formulation is introduced to reduce the over-damping at high frequencies. The formulation reduces the filtering of high frequency motion content when examining the motion Fourier spectrum. With appropriate choice of frequency range, both formulations provide a similar response when represented by the 5% damped elastic response spectrum.

The proposed formulations used in non-linear site response analysis show that the equivalent linear frequency domain solution commonly used to approximate non-linear site response underestimates surface ground motion within a period range relevant to engineering applications. A new guideline is provided for the use of the proposed formulations in non-linear site response analysis.