DESIRABLE STRENGTH DISTRIBUTION FOR ASYMMETRIC STRUCTURES WITH STRENGTH-STIFFNESS DEPENDENT ELEMENTS

Recent studies have shown that for many reinforced concrete lateral force-resisting elements (LFRE) stiffness is dependent on strength, and as a result strength assign-ment to these elements would affect both the strength and stiffness distributions in a structure. As a consequence, stiffness distribution cannot be considered known prior to strength assignment. This implies that in assigning strength to LFRE, the designer has the ability not only to prescribe the strength distribution, but also indirectly control the stiffness distribution in the structure. In this paper, a study is made on the seis-mic performance of a number of single-story structures to reconfirm that the “balanced CV-CR location” criterion, previously suggested by the writers, constitutes a desirable strength/stiffness distribution for minimising torsional response of asymmetric reinforced concrete structures.     

EXTENSION OF EUROCODE 8 TORSIONAL PROVISIONS TO MULTI-STOREY BUILDINGS

A procedure is presented to extend the static torsional provisions of the Eurocode 8 (EC8) to asymmetrical multi-storey buildings. It is shown that even if the conditions in Annex A of EC8 are satisfied, the static torsional provision will not be effective to compensate for the effect of torsion unless the building possesses a minimum level of torsional stiffness. By means of examples, it is shown that this minimum torsional stiffness condition can be specified in the Code using the mean stiffness radius of gyration of the building calculated based on the proposed procedure as an index.     

STIFFNESS AND FRACTURE CHARACTERISTICS OF THE NORTHRIDGE STEEL MOMENT RESISTING CONNECTIONS

The Northridge fractures demonstrated the inability of the welded beam-to-column connection, typically used in California prior to the 1994 earthquake, to fully develop the beam's plastic moment and, in some cases, to even reach yield. The unanticipated character of these failures implies that loads at which fracture occurs under Northridge-type conditions as well as the effects the latter has on a building's stiffness need to be quantified. This paper addresses these issues in a quantitive manner. To simplify matters, the behaviour of a simple single degree-of-freedom (SDOF) frame, with connection characteristics modelled in a way that reflects the Northridge conditions, is examined by taking into account the random nature of the connection's resistance to fracture. The fracture event is found to result in a modest reduction in the frame's lateral stiffness, with the post-fracture behaviour being governed by the behaviour of the remaining connecting elements.     

RESPONSE OF UNREINFORCED MASONRY BUILDINGS

Abstract

A summary of dynamic measurements are presented that illustrate relations between linear seismic demand and true nonlinear response of unreinforced masonry buildings with flexible diaphragms and rocking piers subjected to a series of simulated earthquake motions.     

Shaking Table Test of the Taiwanese Traditional Dieh-Dou Timber Frame

This article attempts to explore the dynamic behavior of traditional Dieh-Dou timber structure under different combinations of structural forms and vertical loads. Using time-history record (TCU 084) from the Chi-Chi earthquake, two semi full-scale specimens (Symmetric and Asymmetric) were tested. Results showed that the Symmetric specimen tends to be damaged more easily and faster than the Asymmetric one. Damage pattern generally begins from the bottom Dou members and subsequently spreading upwards to the upper Dou, horizontal Gong members, and adjoining Shu members. Friction force between the contact surfaces is crucial towards the maintenance of overall structure. Increase vertical loadings have significant effect on the natural frequencies and global stiffness of the structure. Using the Single-Degree-Of-Freedom (SDOF) system, the derived stiffness is generally in good agreement with the dynamic results of both forms. This study suggests that the effects of increasing vertical loadings should be taken into consideration for future evaluation.     

SIMULATION OF NONLINEAR SOIL-STRUCTURE INTERACTION ON A SHAKING TABLE

A new method to simulate soil-structure interaction effects in shaking table tests has recently been presented by the authors. In this method, analog circuits or digital signal processors are used to produce soil-foundation interaction motions in real time. Their expressions of soil-structure interaction motions are based on published rigorous formulations of impulse response functions or flexibility functions of foundations resting on or embedded in homogeneous or layered soils of semi-infinite extent. In this paper the method is further extended to take the “far field” soil non-linearity into account. An example of non-linear soil-structure interaction simulation using the present method is also described.     

Flexural Performance of Small Fir and Pine Timber Beams Strengthened With Near-Surface Mounted Carbon-Fiber-Reinforced Polymer (NSM CFRP) Plates and Rods

In order to study the flexural performance of fir and pine timber beams strengthened with near-surface mounted carbon-fiber-reinforced polymer (CFRP) plates and rods, bending tests on 20 specimens are carried out, including four unstrengthened specimens, four specimens strengthened with CFRP plate with the dimension of 1.4 mm × 30 mm, four specimens strengthened with CFRP plate with the dimension of 2.8 mm × 30 mm, four specimens strengthened with one Φ6 mm CFRP rod, and four specimens strengthened with one Φ8 mm CFRP rod. The proportions of fir specimens and pine specimens are 50% and 50%. The results show that compared with the unstrengthened specimens, there is an improvement in flexural capacity and stiffness of the specimens strengthened with near-surface mounted CFRP plates and rods respectively. Finally, the calculation formulas of the flexural capacity of fir and pine timber beams strengthened with near-surface mounted CFRP plates and rods are presented.