Permeability changes in simulated granite faults during and after frictional sliding

Thermal–hydrological–mechanical coupling processes suggest that fault permeability should undergo dynamic change as a result of seismic slip. In igneous rocks, a fault's slip surface may have much higher permeability than the surrounding rock matrix and therefore operate as a conduit for fluids. We conducted laboratory experiments to investigate changes in fracture permeability (or transmissivity) of a fault in granite due to shear slip and cyclic heating and cooling. Our experiments showed that high initial fracture transmissivity (>10^?18 m³) was associated with a high friction coefficient and that transmissivity decreased during slip. We propose that this reduction in transmissivity reflects the presence of gouge in fracture voids, increasing the area of contact in the fault plane and reducing the hydraulic aperture. In contrast, when initial fracture transmissivity was low (<10^?18 m³), we observed that friction was lower and transmissivity increased during slip. The high transmissivity and high friction may be explained by large areas of bare rock being in contact on the slip surface. Slip velocity had little influence on the evolution of permeability, probably because gouge produced at different slip velocities had similar grain size distributions, or because gouge leaked from the slip surface. Transmissivity decreased with increasing temperature in heating tests, probably due to thermal expansion increasing normal stress on the fracture. Frictional heating did not influence transmissivity during the shearing tests.     

Pore pressure evolution and fluid flow during visco‐elastic single‐layer buckle folding

Pore pressure and fluid flow during the deformational history of geologic structures are directly influenced by tectonic deformation events. In this contribution, 2D plane strain finite element analysis is used to study the influence of different permeability distributions on the pore pressure field and associated flow regimes during the evolution of visco‐elastic single‐layer buckle folds. The buckling‐induced fluid flow regimes indicate that flow directions and, to a lesser degree, their magnitudes vary significantly throughout the deformation and as a function of the stratigraphic permeability distribution. The modelling results suggest that the volumetric strain and the permeability distribution significantly affect the resulting flow regime at different stages of fold development. For homogeneous permeability models (k > 10^?21 m²), low strain results in a mostly pervasive fluid flow regime and is in agreement with previous studies. For larger strain conditions, fluid focusing occurs in the buckling layer towards the top of the fold hinge. For low permeabilities (<10^?21 m²), local focused flow regimes inside the buckling layer emerge throughout the deformation history. For models featuring a low‐permeability layer embedded in a high‐permeability matrix or sandwiched between high‐permeability layers, focused flow regimes inside the folded layer result throughout the deformation history, but with significant differences in the flow vectors of the surrounding layers. Fluid flow vectors induced by the fold can result in different, even reversed, directions depending on the amount of strain. In summary, fluid flow regimes during single‐layer buckling can change from pervasive to focused and fluid flow vectors can be opposite at different strain levels, that is the flow vectors change significantly through time. Thus, a complete understanding of fluid flow regimes associated with single‐layer buckle folds requires consideration of the complete deformation history of the fold.     

Modelling the Lost City hydrothermal field: influence of topography and permeability structure

The Lost City hydrothermal field (LCHF) is hosted in serpentinite at the crest of the Atlantis Massif, an oceanic core complex close to the mid‐Atlantic Ridge. It is remarkable for its longevity and for venting low‐temperature (40–91°C) alkaline fluids rich in hydrogen and methane. IODP Hole U1309D, 5 km north of the LCHF, penetrated 1415 m of gabbroic rocks and contains a near‐conductive thermal gradient close to 100°C km^?1. This is remarkable so close to an active hydrothermal field. We present hydrothermal modelling using a topographic profile through the vent field and IODP site U1309. Long‐lived circulation with vent temperatures similar to the LCHF can be sustained at moderate permeabilities of 10^?14 to 10^?15 m² with a basal heatflow of 0.22 W m^?2. Seafloor topography is an important control, with vents tending to form and remain in higher topography. Models with a uniform permeability throughout the Massif cannot simultaneously maintain circulation at the LCHF and the near‐conductive gradient in the borehole, where permeabilities <10^?16 m² are required. A steeply dipping permeability discontinuity between the LCHF and the drill hole is required to stabilize venting at the summit of the massif by creating a lateral conductive boundary layer. The discontinuity needs to be close to the vent site, supporting previous inferences that high permeability is most likely produced by faulting related to the transform fault. Rapid increases in modelled fluid temperatures with depth beneath the vent agree with previous estimates of reaction temperature based on geochemical modelling.     

Klinkenberg gas slippage measurements as a means for shale pore structure characterization

Established techniques that have been successfully used to characterize pore systems in conventional reservoir rocks lack the resolution and scalability required to adequately characterize the nano‐ to micrometer scale pore systems found in shale and cannot be applied on stressed samples. We have therefore investigated the utility of Klinkenberg gas slippage measurements for shale pore structure characterization. In contrast to other approaches, slippage measurements characterize the effective porosity of core samples and can be applied at stress conditions experienced in the reservoir during production. Slippage measurements on horizontally and vertically oriented samples from the Eagle Ford Shale Formation, Texas, USA, at a range of stress states revealed two orders of magnitude in slippage variation over five orders of magnitude permeability range. Slippage measurements are negatively correlated with permeability and follow similar trends to those found in other studies on higher permeability rocks. The samples had varying degrees of slippage anisotropy, which allowed interpretation of the relative contribution of tortuosity and pore size to permeability anisotropy. Slippage and therefore average effective pore size was found to vary up to one order of magnitude at a given permeability, warranting investigation of the significance this might have on flow properties and ultimately hydrocarbon production from shale.     

Earthquake‐related temperature changes in two neighboring hot springs at Xiangcheng,China

Pre‐earthquake and postearthquake temperature changes were documented in two hot springs at Xiangcheng. Pre‐earthquake changes were documented in spring I, 13 days before and 106 km away from the M_s 5.8 Zhongdian earthquake. The 11‐year cutoff spring spouted again, and the spouted water was 24°C hotter than the former escaping gas. Postearthquake changes were documented in spring II following the 2008 M_w 7.9 Wenchuan earthquake, approximately 425 km away from the epicenter. Temperature in spring II showed a step‐like increase with a magnitude of 4°C induced by the earthquake. Spring I which is 0.3 m apart from spring II did not show a sudden change following the earthquake. However, temperatures in the two springs were identical after the Wenchuan earthquake. It indicates that the earthquake generated new hydraulic connectivity between springs I and II, and the heat transport between the two springs accounts for the postearthquake temperature changes.     

怎样在小学语文教学中渗透心理健康教育

语文学科《课程标准》明确地提出“知识与能力,态度与方法,情感、态度与价值观”的课程目标与要求,强调对学生能力的培养与人格的养成。“在语文学习过程中,培养爱国主义感情、社会主义道德品质,逐步形成积极的人生态度和正确的价值观,提高文化品位和审美情趣。”     

Apatite grain boundary morphology and its response to low-temperature fluid infiltration in crystalline basement

Apatite grain boundaries on fractured rock surfaces have been examined in an amphibolite facies regional metamorphic granite gneiss from the central Swiss Alps. The morphology of apatite has been characterized using a scanning electron microscope and matched to surface textures in adjoining silicates. Apatites show a wide variety of different surface features ranging from planar crystal faces, to small-scale ridges and dimples, to extensive irregular pitting. Many of these features form in response to the periodic infiltration of fluids along open grain boundaries during the cooling history of the gneiss. Apatite shows evidence of both dissolution and re-precipitation that is controlled by the nature of the grain boundary, the structure of the adjoining silicate phase and the alteration of the host rock. Fracturing occurs in a range of retrograde conditions and is common both within the apatite and along grain boundaries. This coupled to the evidence of fluid interaction with mineral surfaces suggests that extensive permeable networks may be typical of cooling crystalline basement rocks. Grain boundary textures have the potential to reveal a unique record of fluid infiltration in the crust that would be very difficult to decipher using traditional petrographic methods.     

The upper continental crust, an aquifer and its fluid: hydaulic and chemical data from 4 km depth in fractured crystalline basement rocks at the KTB test site

Detailed information on the hydrogeologic and hydraulic properties of the deeper parts of the upper continental crust is scarce. The pilot hole of the deep research drillhole (KTB) in crystalline basement of central Germany provided access to the crust for an exceptional pumping experiment of 1‐year duration. The hydraulic properties of fractured crystalline rocks at 4 km depth were derived from the well test and a total of 23100 m³ of saline fluid was pumped from the crustal reservoir. The experiment shows that the water‐saturated fracture pore space of the brittle upper crust is highly connected, hence, the continental upper crust is an aquifer. The pressure–time data from the well tests showed three distinct flow periods: the first period relates to wellbore storage and skin effects, the second flow period shows the typical characteristics of the homogeneous isotropic basement rock aquifer and the third flow period relates to the influence of a distant hydraulic border, probably an effect of the Franconian lineament, a steep dipping major thrust fault known from surface geology. The data analysis provided a transmissivity of the pumped aquifer T = 6.1 × 10^?6 m² sec^?1, the corresponding hydraulic conductivity (permeability) is K = 4.07 × 10^?8 m sec^?1 and the computed storage coefficient (storativity) of the aquifer of about S = 5 × 10^?6. This unexpected high permeability of the continental upper crust is well within the conditions of possible advective flow. The average flow porosity of the fractured basement aquifer is 0.6–0.7% and this range can be taken as a representative and characteristic values for the continental upper crust in general. The chemical composition of the pumped fluid was nearly constant during the 1‐year test. The total of dissolved solids amounts to 62 g l^?1 and comprise mainly a mixture of CaCl₂ and NaCl; all other dissolved components amount to about 2 g l^?1. The cation proportions of the fluid (X_Ca approximately 0.6) reflects the mineralogical composition of the reservoir rock and the high salinity results from desiccation (H₂O‐loss) due to the formation of abundant hydrate minerals during water–rock interaction. The constant fluid composition suggests that the fluid has been pumped from a rather homogeneous reservoir lithology dominated by metagabbros and amphibolites containing abundant Ca‐rich plagioclase.     

How should permeability be measured in fine‐grained lithologies? Evidence from the chalk

Two chalk data sets from the Central North Sea (UK/Norway and Denmark) with a similar lithological classification and porosity values (5–20%) have a difference in permeability of up to three orders of magnitude. The method of measuring permeability was different for the two data sets: samples from UK/Norway were measured by transient pulse decay (TPD), while the Danish samples were measured by routine core analysis. Petrological and petrophysical characterization of samples from the two data sets have revealed that all samples display a similar range of rock properties; the differences are not due to regional facies variations. It is likely that the low permeability values reported by TPD have more validity than routine core analyses in measuring lower porosity and permeability chalk (5–20% porosity, <0.01 mD). The fact that large sections of North Sea chalk potentially have much lower permeability than previously reported has widespread implications for petroleum migration and entrapment, and overpressure generation.     

The influence of poorly interconnected fault zone flow paths on spring geochemistry

Thermal springs commonly occur along faults because of the enhanced vertical permeability afforded by fracture zones. Field and laboratory studies of fault zone materials document substantial heterogeneities in fracture permeabilities. Modeling and field studies of springs suggest that spatial variations in permeability strongly influence spring locations, discharge rates and temperatures. The impact of heterogeneous permeability on spring geochemistry, however, is poorly documented. We present stable isotope and water chemistry data from a series of closely spaced thermal springs associated with the Hayward Fault, California. We suggest that substantial spatial variations observed in δ¹⁸O and chloride values reflect subsurface fluid transport through a poorly connected fracture network in which mixing of subsurface waters remains limited. Our measurements provide insight into the effect of fracture zone heterogeneities on spring geochemistry, offer an additional tool to intuit the nature of tectonically induced changes in fault zone plumbing, and highlight the need to consider local variations when characterizing fracture zone fluid geochemistry from spring systems with multiple discharge sites.