Fluid flow and stability of the US continental slope offshore New Jersey from the Pleistocene to the present

We predict that portions of the New Jersey continental slope were unstable approximately 0.5 million years ago. This instability was caused by rapid sediment loading during a Pleistocene sea‐level lowstand and by flow focusing in underlying, permeable Miocene strata. The simulated instability is consistent with soft‐sediment deformation and small slumps in Pleistocene strata of the Hudson Apron. Stability of the New Jersey margin has increased since 0.3 Ma because sedimentation rate has decreased. Today, the modelled factor of safety (FS) for the upper slope is approximately 1.5 whereas in the lower slope it exceeds 3. We predict that sedimentation rate is a dominant factor on slope stability. When rapid and asymmetric loading of a highly permeable sedimentary layer occurs, the location of instability can shift seaward to regions where sedimentation rates are low. Stability calculations use pressures and effective stresses predicted by a coupled sedimentation‐fluid flow model. This hydrodynamic analysis demonstrates how the interplay of sedimentation and fluid migration affects the distribution, timing, and size of sedimentary failures.     

Overpressure in the Malay Basin and prediction methods

Predrill overpressure prediction is important for well planning and migration modeling for prospect evaluation. The Eaton (Journal of Petroleum Technology, 24 , 1972, 929) and Bowers (SPE Drilling & Completion, 10 , 1995, 89) methods are used worldwide for postdrill overpressure prediction using sonic log and predrill overpressure prediction using seismic interval velocity. In this research, these two methods were used for overpressure prediction using 3D anisotropic prestack depth‐migrated seismic interval velocity in a field of the Malay Basin. In the shallow overpressured zone, where the mechanism of overpressure is undercompaction, the onset of overpressure was predicted reasonably well using the Eaton and Bowers methods with their standard parameters (i.e., Eaton exponent 3 and Bowers loading curve) for seismic velocity. However, in the deep overpressured zone, where fluid expansion is the cause of overpressure generation, these methods underpredicted the high overpressure. In the deep overpressured zone, the overpressures were better predicted by applying a correction to the Eaton method. On the other hand, the Bowers unloading parameters for the fluid expansion mechanisms did not show any significant effect on overpressure prediction. Hence, in the study area, the Bowers method is not effective for 3D overpressure prediction using seismic velocity, whereas the Eaton method is more robust and can be used for 3D overpressure prediction from seismic velocity.     

The origin of overpressure in 'old' sedimentary basins: an example from the Cooper Basin, Australia

Overpressure in ‘old’ sedimentary basins that have not undergone rapid, recent sedimentation cannot be easily explained using traditional burial‐driven mechanisms. The last significant burial event in the Cooper Basin, Australia, was the Late Cretaceous deposition of the Winton Formation (98.5–90 Ma). Maximum temperature in the basin was attained during the Late Cretaceous, with cooling beginning prior to 75 Ma. Hence, overpressure related to rapid burial or palaeomaximum temperatures (e.g. hydrocarbon generation) must have developed prior to 75 Ma. Retaining overpressure for 75 Ma in ‘old’ basins such as the Cooper Basin requires extremely low seal permeabilities. An alternative explanation is that overpressure in the Cooper Basin has been generated because of an increase in mean stress associated with an increase in horizontal compressive stress since Late Cretaceous times. Structural observations and contemporary stress data indicate that there has been an increase in mean stress of approximately 50 MPa between Late Cretaceous times to that presently measured at 3780 m. The largest measured overpressure in the Cooper Basin is 14.5 MPa at 3780 m in the Kirby 1 well. Hence, disequilibrium compaction driven by increasing mean stress can explain the magnitude of the observed overpressure in the Cooper Basin. Increases in mean stress (tectonic loading) may be a feasible mechanism for overpressure generation in other ‘old’ basins that have undergone a recent increase in horizontal stress (e.g. Anadarko Basin).     

The Ethics Minefield: Issues of responsibility in learning and research

Google Glass was deployed in an Urban Studies field course to gather videographic data for team-based student research projects. We evaluate the potential for wearable computing technology such as Glass, in combination with other mobile computing devices, to enhance reflexive research skills, and videography in particular, during field research. The utility as well as the limitations of Google Glass are discussed, including its actual and potential application for teaching and data gathering purposes in the field. As such, this article constitutes one of the first instances of evaluating Google Glass as a social science research tool.     

NOTE ON THE INCLUSION OF SITE CLASSIFICATION INFORMATION IN EQUATIONS TO ESTIMATE STRONG GROUND MOTIONS

Two main regression methods have been proposed for using site category information within ground motion prediction equations, these are: (a) joint estimation of the site category coefficients and the magnitude and distance coefficients; or (b) estimation of site category coefficients by using the residuals from the equation derived without considering soil conditions. Method (a) requires each record be assigned a site category whereas for method (b), because it relies on residuals, site information can be missing for some records. This short note finds that if the mean of the transformed distances within each site category is the same then the two methods give the same site coefficients. If, however, these means are significantly different then method (b) can yield incorrect site coefficients.     

A DAMAGE MODEL FOR THE ANALYSIS OF THE SEISMIC RESPONSE OF MONUMENTAL BUILDINGS

In this paper the Author proposes a damage model for the analysis of masonry plates and shells, which is based on an improvement of a previous constitutive model. The modifications introduced, connected to the head joint damage, allow us to study the influence of masonry texture on the damage modes once the mechanical characteristics of the elements constituting the masonry and the results of tests on simple assemblages are known. Having a nonlinear constitutive model is certainly one of the basic elements for understanding the damage mechanisms in masonry buildings. If, in fact, an elastic-linear constitutive model may be used under normal loading conditions, in critical situations it is necessary to model the damage and the dissipation mechanisms that occur between the elements, stone (brick) and mortar, in correlation with their characteristics and kind of masonry. To validate the model a comparison is made between the numerical and experimental results, in the case of tests available in the literature in masonry panels subjected to out-of plane loading and in a real structure through the observation of the damage in Umbria (Italy) surveyed after the 1997 earthquake.     

Reading back from Experimental Painting

ABSTRACT

My book, Experimental Painting (1970), was the product of a decade of coming to terms with the history of modern art and with contemporary manifestations of the avantgarde. While at Cambridge from 1960 to 1967, I published art criticism, initially in locally published magazines, and then went on to review art exhibitions both nationally and internationally. This led to being co-editor of Form, which produced further opportunities. The term ‘experimental’ that I adopted in 1970 was intended to suggest the paradigm of scientific discovery which suited some, if not all, of the artists I studied. This article considers concepts directly imported from contemporary scientific enquiry that seemed relevant to me at the time, notably those from experimental psychology, psychoanalysis and structural linguistics. I relate them to the character of intellectual life at Cambridge in a period which saw much debate about the relationship between Sciences and Humanities as ‘Two Cultures’.     

Downward hydrocarbon migration predicted from numerical modeling of fluid overpressure in the Paleozoic Anticosti Basin,eastern Canada

The Anticosti Basin is a large Paleozoic basin in eastern Canada where potential source and reservoir rocks have been identified but no economic hydrocarbon reservoirs have been found. Potential source rocks of the Upper Ordovician Macasty Formation overlie carbonates of the Middle Ordovician Mingan Formation, which are underlain by dolostones of the Lower Ordovician Romaine Formation. These carbonates have been subjected to dissolution and dolomitization and are potential hydrocarbon reservoirs. Numerical simulations of fluid‐overpressure development related to sediment compaction and hydrocarbon generation were carried out to investigate whether hydrocarbons generated in the Macasty Formation could migrate downward into the underlying Mingan and Romaine formations. The modeling results indicate that, in the central part of the basin, maximum fluid overpressures developed above the Macasty Formation due to rapid sedimentation. This overpressured core dissipated gradually with time, but the overpressure pattern (i.e. maximum overpressure above source rock) was maintained during the generation of oil and gas. The downward impelling force associated with fluid‐overpressure gradients in the central part of the basin was stronger than the buoyancy force for oil, whereas the buoyancy force for gas and for oil generated in the later stage of the basin is stronger than the overpressure‐related force. Based on these results, it is proposed that oil generated from the Macasty Formation in the central part of the basin first moved downward into the Mingan and Romaine formations, and then migrated laterally up‐dip toward the basin margin, whereas gas throughout the basin and oil generated in the northern part of the basin generally moved upward. Consequently, gas reservoirs are predicted to occur in the upper part of the basin, whereas oil reservoirs are more likely to be found in the strata below the source rocks. Geofluids (2010) 10 , 334–350     

Granite‐related overpressure and volatile release in the mid crust: fluidized breccias from the Cloncurry District,Australia

The source and transport regions of fluidized (transported) breccias outcrop in the Cloncurry Fe‐oxide–Cu–Au district. Discordant dykes and pipes with rounded clasts of metasedimentary calc–silicate rocks and minor felsic and mafic intrusions extend several kilometres upwards and outwards from the contact aureole of the 1530 Ma Williams Batholith into overlying schists and amphibolites. We used analytical equations for particle transport to estimate clast velocities (≥20 m sec^?1), approaching volcanic ejecta rates. An abrupt release of overpressured magmatic‐hydrothermal fluid is suggested by the localization of the base of the breccias in intensely veined contact aureoles (at around 10 km, constrained by mineral equilibria), incorporation of juvenile magmatic clasts, the scale and discordancy of the bodies, and the wide range of pressure variation (up to 150 MPa) inferred from CO₂ fluid inclusion densities and related decrepitation textures. The abundance of clasts derived from depth, rather than from the adjacent wallrocks, suggests that the pressure in the pipes was sufficient to restrict the inwards spalling of fragments from breccia walls; that is, the breccias were explosive rather than implosive, and some may have vented to the surface. At these depths, such extreme behaviour may have been achieved by release of dissolved fluids from crystallizing magma, in combination with a strongly fractured and fluid‐laden carapace, sitting under a strong, low permeability barrier. The relationship of these breccias to the Ernest Henry iron‐oxide–Cu–Au deposit suggests they may have been sources of fluids or mechanical energy for ore genesis, or alternately provided permeable pathways for later ore fluids.     

Devolatilization‐induced pressure build‐up: Implications for reaction front movement and breccia pipe formation

Generation of fluids during metamorphism can significantly influence the fluid overpressure, and thus the fluid flow in metamorphic terrains. There is currently a large focus on developing numerical reactive transport models, and with it follows the need for analytical solutions to ensure correct numerical implementation. In this study, we derive both analytical and numerical solutions to reaction‐induced fluid overpressure, coupled to temperature and fluid flow out of the reacting front. All equations are derived from basic principles of conservation of mass, energy and momentum. We focus on contact metamorphism, where devolatilization reactions are particularly important owing to high thermal fluxes allowing large volumes of fluids to be rapidly generated. The analytical solutions reveal three key factors involved in the pressure build‐up: (i) The efficiency of the devolatilizing reaction front (pressure build‐up) relative to fluid flow (pressure relaxation), (ii) the reaction temperature relative to the available heat in the system and (iii) the feedback of overpressure on the reaction temperature as a function of the Clapeyron slope. Finally, we apply the model to two geological case scenarios. In the first case, we investigate the influence of fluid overpressure on the movement of the reaction front and show that it can slow down significantly and may even be terminated owing to increased effective reaction temperature. In the second case, the model is applied to constrain the conditions for fracturing and inferred breccia pipe formation in organic‐rich shales owing to methane generation in the contact aureole.