The origins of salinity in metamorphic fluids

Evaluation of data on formation waters and metamorphic fluids sampled by drilling or preserved in fluid inclusions reveals little correlation between fluid salinity and metamorphic grade, but a strong link to original sedimentary setting. Sediments and metasediments deposited originally in shallow marine environments can contain fluids with a very wide range of salinities, but they are commonly near twice seawater salinity or higher. With increasing metamorphic grade, a very wide range of salinities may develop, with the highest levels tracking halite saturation. Oceanic and accretionary prism sequences yield low‐salinity fluids, close to seawater values, almost irrespective of metamorphic grade until extreme conditions are reached where removal of water may increase fluid salinity. The salinities of metamorphic fluids exert a fundamental control on both fluid phase equilibria and metal‐transporting capability, and appear, to a large degree, to reflect the original presence or absence of highly saline formation waters and/or evaporites in the initial sedimentary sequence.     

From deep to shallow fluid reservoirs: evolution of fluid sources during exhumation of the Sierra Almagrera,Betic Cordillera,Spain

The combination of structural, geochemical and palaeotopographic data proves to be an efficient tool to understand fluid transfers in the crust. This study discriminates shallow and deep fluid reservoirs on both sides of the brittle–ductile transition under an extensional regime and points out the role of major transcurrent fault activity in this palaeohydrogeological setting. Palaeofluids trapped in quartz and siderite–barite veins record the transfer of fluids and metal solute species during the Neogene exhumation of the Sierra Almagrera metamorphic belt. Ductile then brittle–ductile extensional quartz veins formed from a deep fluid reservoir, trapping metamorphic secondary brines containing low‐density volatile phases derived from the dissolution of Triassic evaporites. During exhumation, low‐salinity fluids percolated within the brittle domain, as shown by transgranular fluid inclusion planes affecting previous veins. These observations indicate the opening of the system during Serravalian to early Tortonian times and provide evidence for the penetration of surficial fluids of meteoric or basinal origin into the upper part of the brittle–ductile transition. During exhumation, synsedimentary transcurrent tectonic processes occurred from late Tortonian times onwards, while marine conditions prevailed at the Earth's surface. At depth in the brittle domain, quartz veins associated with haematite record a return to high‐salinity fluid circulation suggesting an upward transfer fed from a lower reservoir. During the Messinian, ongoing activity of the trans‐Alboran tectono‐volcanic trend led to the formation of ore deposits. Reducing fluids caused the formation of siderite and pyrite ores. The subsequent formation of galena and barite may be related to an increase of temperature. The high salinity and Cl/Br ratio of the fluids suggest another source of secondary brine derived from dissolved Messinian evaporites, as corroborated by the δ³⁴S signature of barite. These evaporites preceded the main sea‐level drop related to the peak of the salinity crisis (5.60–5.46 Ma).     

Fluids and halogens at the diagenetic–metamorphic boundary: evidence from veins in continental basins, western Norway

Seven vein types are recognized in three continental Devonian molasse basins (the Hornelen, Kvamshesten and Solund basins) in western Norway. These include calcite‐, quartz‐ and epidote‐dominated veins. The salinities of fluid inclusions from quartz‐dominated veins in the Hornelen and Kvamshesten basins are close to or slightly higher than those for modern seawater, whereas the fluids from quartz‐ and calcite‐dominated veins in the Solund basin range from seawater values to 20 wt % NaCl equivalent. Minerals such as biotite, amphibole, titanite, chlorite and epidote are abundant in the latter veins, and are important constituents of the authigenic mineral assemblages. A combination of fluid inclusion and petrological data suggest that at least some of the veins formed at depths around 12–14 km. The Cl/Br ratios and the salinity of the fluid inclusions can be explained by interactions with evaporites, implying that the sedimentary environment forming the basin fill had the strongest influence upon low‐grade metamorphic fluid Cl and Br contents. Differences in the Cl/I and Na/Br ratios between the Solund basin and the Hornelen and Kvamshesten basins are best explained by local mass transfer between pore fluids and the surrounding rock matrix during burial and increasing temperatures.     

Fluid inclusion and stable isotope constraints on the genesis of the Jian copper deposit,Sanandaj–Sirjan metamorphic zone,Iran

The Jian copper deposit, located on the eastern edge of the Sanandaj–Sirjan metamorphic zone, southwest of Iran, is contained within the Surian Permo‐Triassic volcano‐sedimentary complex. Retrograde metamorphism resulted in three stages of mineralization (quartz ± sulfide veins) during exhumation of the Surian metamorphic complex (Middle Jurassic time; 159–167 Ma), and after the peak of the metamorphism (Middle to Late Triassic time; approximately 187 Ma). The early stage of mineralization (stage 1) is related to a homogeneous H₂O–CO₂ (XCO₂ > 0.1) fluid characterized by moderate salinity (<10 wt.% NaCl equivalent) at high temperature and pressure (>370°C, >3 kbar). Early quartz was followed by small amounts of disseminated fine‐grained pyrite and chalcopyrite. Most of the main‐ore‐stage (stage 2) minerals, including chalcopyrite, pyrite and minor sphalerite, pyrrhotite, and galena, precipitated from an aqueous‐carbonic fluid (8–18 wt.% NaCl equivalent) at temperatures ranging between 241 and 388°C during fluid unmixing process (CO₂ effervescence). Fluid unmixing in the primary carbonaceous fluid at pressures of 1.5–3 kbar produced a high XCO₂ (>0.05) and a low XCO₂ (<0.01) aqueous fluid in ore‐bearing quartz veins. Oxygen and hydrogen isotope compositions suggest mineralization by fluids derived from metamorphic dehydration (δ¹⁸O_fluid = +7.6 to +10.7‰ and δD = ?33.1 to ?38.5‰) during stage 2. The late stage (stage 3) is related to a distinct low salinity (1.5–8 wt.% NaCl equivalent) and temperatures of (120–230°C) aqueous fluid at pressures below 1.5 kbar and the deposition of post‐ore barren quartz veins. These fluids probably derived from meteoric waters, which circulated through the metamorphic pile at sufficiently high temperatures and acquire the characteristics of metamorphic fluids (δ¹⁸O_fluid = +4.7 to +5.1‰ and δD = ?52.3 to ?53.9‰) during waning stages of the postearly Cimmerian orogeny in Surian complex. The sulfide‐bearing quartz veins are interpreted as a small‐scale example of redistribution of mineral deposits by metamorphic fluids. This study suggests that mineralization at the Jian deposit is metamorphogenic in style, probably related to a deep‐seated mesothermal system.     

Spatial coupling between spilitization and carbonation of basaltic sills in SW Scottish Highlands: evidence of a mineralogical control of metamorphic fluid flow

In a geochemical and petrological analysis of overprinting episodes of fluid–rock interaction in a well‐studied metabasaltic sill in the SW Scottish Highlands, we show that syn‐deformational access of metamorphic fluids and consequent fluid–rock interaction is at least in part controlled by preexisting mineralogical variations. Lithological and structural channelling of metamorphic fluids along the axis of the Ardrishaig Anticline, SW Scottish Highlands, caused carbonation of metabasaltic sills hosted by metasedimentary rocks of the Argyll Group in the Dalradian Supergroup. Analysis of chemical and mineralogical variability across a metabasaltic sill at Port Cill Maluaig shows that carbonation at greenschist to epidote–amphibolites facies conditions caused by infiltration of H₂O‐CO₂ fluids was controlled by mineralogical variations, which were present before carbonation occurred. This variability probably reflects chemical and mineralogical changes imparted on the sill during premetamorphic spilitization. Calculation of precarbonation mineral modes reveals heterogeneous spatial distributions of epidote, amphibole, chlorite and epidote. This reflects both premetamorphic spilitization and prograde greenschist facies metamorphism prior to fluid flow. Spilitization caused albitization of primary plagioclase and spatially heterogeneous growth of epidote ± calcic amphibole ± chlorite ± quartz ± calcite. Greenschist facies metamorphism caused breakdown of primary pyroxene and continued, but spatially more homogeneous, growth of amphibole + chlorite ± quartz. These processes formed diffuse epidote‐rich patches or semi‐continuous layers. These might represent precursors of epidote segregations, which are better developed elsewhere in the SW Scottish Highlands. Chemical and field analyses of epidote reveal the evidence of local volume fluctuations associated with these concentrations of epidote. Transient permeability enhancement associated with these changes may have permitted higher fluid fluxes and therefore more extensive carbonation. This deflected metamorphic fluid such that its flow direction became more layer parallel, limiting propagation of the reaction front into the sill interior.     

Chemical evolution of metamorphic fluids in the Central Alps,Switzerland: insight from LA‐ICPMS analysis of fluid inclusions

The chemical evolution of fluids in Alpine fissure veins (open cavities with large free‐standing crystals) has been studied by combination of fluid inclusion petrography, microthermometry, LA‐ICPMS microanalysis, and thermodynamic modeling. The quartz vein systems cover a metamorphic cross section through the Central Alps (Switzerland), ranging from subgreenschist‐ to amphibolite‐facies conditions. Fluid compositions change from aqueous inclusions in subgreenschist‐ and greenschist‐facies rocks to aqueous–carbonic inclusions in amphibolite‐facies rocks. The fluid composition is constant for each vein, across several fluid inclusion generations that record the growth history of the quartz crystals. Chemical solute geothermometry, fluid inclusion isochores, and constraints from fluid–mineral equilibria modeling were used to reconstruct the pressure–temperature conditions of the Alpine fissure veins and to compare them with the metamorphic path of their host rocks. The data demonstrate that fluids in the Aar massif were trapped close to the metamorphic peak whereas the fluids in the Penninic nappes record early cooling, consistent with retrograde alteration. The good agreement between the fluid–mineral equilibria modeling and observed fluid compositions and host‐rock mineralogy suggests that the fluid inclusions were entrapped under rock‐buffered conditions. The molar Cl/Br ratios of the fluid inclusions are below the seawater value and would require unrealistically high degrees of evaporation and subsequent dilution if they were derived from seawater. The halogen data may thus be better explained by interaction between metamorphic fluids and organic matter or graphite in metasedimentary rocks. The volatile content (CO₂, sulfur) in the fluid inclusions increases systematically as function of the metamorphic grade, suggesting that the fluids have been produced by prograde devolatilization reactions. Only the fluids in the highest grade rocks were partly modified by retrograde fluid–rock interactions, and all major element compositions reflect equilibration with the local host rocks during the earliest stages of postmetamorphic uplift.     

Permeability of continental crust influenced by internal and external forcing

The permeability of continental crust is so highly variable that it is often considered to defy systematic characterization. However, despite this variability, some order has been gleaned from globally compiled data. What accounts for the apparent coherence of mean permeability in the continental crust (and permeability–depth relations) on a very large scale? Here we argue that large‐scale crustal permeability adjusts to accommodate rates of internal and external forcing. In the deeper crust, internal forcing – fluxes induced by metamorphism, magmatism, and mantle degassing – is dominant, whereas in the shallow crust, external forcing – the vigor of the hydrologic cycle – is a primary control. Crustal petrologists have long recognized the likelihood of a causal relation between fluid flux and permeability in the deep, ductile crust, where fluid pressures are typically near‐lithostatic. It is less obvious that such a relation should pertain in the relatively cool, brittle upper crust, where near‐hydrostatic fluid pressures are the norm. We use first‐order calculations and numerical modeling to explore the hypothesis that upper‐crustal permeability is influenced by the magnitude of external fluid sources, much as lower‐crustal permeability is influenced by the magnitude of internal fluid sources. We compare model‐generated permeability structures with various observations of crustal permeability.