Fluid mixing induced by hydrothermal activity in the ordovician carbonates in Tarim Basin,China

Permian hydrothermal activity in the Tarim Basin may have been responsible for the invasion of hot brines into Ordovician carbonate reservoirs. Studies have been undertaken to explain the origin and geochemical characteristics of the diagenetic fluid present during this hydrothermal event although there is no consensus on it. We present a genetic model resulting from the study of δ¹³C, δ¹⁸O, δ³⁴S, and ⁸⁷Sr/⁸⁶Sr isotope values and fluid inclusions (FIs) from fracture‐ and vug‐filling calcite, saddle dolomite, fluorite, barite, quartz, and anhydrite from Ordovician outcrops in northwest (NW) Tarim Basin and subsurface cores in Central Tarim Basin. The presence of hydrothermal fluid was confirmed by minerals with fluid inclusion homogenization temperatures being >10°C higher than the paleo‐formation burial temperatures both in the NW Tarim and in the Central Tarim areas. The mixing of hot (>200°C), high‐salinity (>24 wt% NaCl), ⁸⁷Sr‐rich (up to 0.7104) hydrothermal fluid with cool (60–100°C), low‐salinity (0 to 3.5 wt% NaCl), also ⁸⁷Sr‐rich (up to 0.7010) meteoric water in the Ordovician unit was supported by the salinity of fluid inclusions, and δ¹³C, δ¹⁸O, and ⁸⁷Sr/⁸⁶Sr isotopic values of the diagenetic minerals. Up‐migrated hydrothermal fluids from the deeper Cambrian strata may have contributed to the hot brine with high sulfate concentrations which promoted thermochemical sulfate reduction (TSR) in the Ordovician, resulting in the formation of ¹²C‐rich (δ¹³C as low as ?13.8‰) calcite and ³⁴S‐rich (δ³⁴S values from 21.4‰ to 29.7‰) H₂S, pyrite, and elemental sulfur. Hydrothermal fluid mixing with fresh water in Ordovician strata in Tarim Basin was facilitated by deep‐seated faults and up‐reaching faults due to the pervasive Permian magmatic activity. Collectively, fluid mixing, hydrothermal dolomitization, TSR, and faulting may have locally dissolved the host carbonates and increased the reservoir porosity and permeability, which has significant implications for hydrocarbon exploration.     

Polyphasic hydrothermal and meteoric fluid regimes during the growth of a segmented fault involving crystalline and carbonate rocks (Barcelona Plain,NE Spain)

A polyphasic tectonic‐fluid system of a fault that involves crystalline and carbonate rocks (Hospital fault, Barcelona Plain) has been inferred from regional to thin section scale observations combined with geochemical analyses. Cathodoluminescence, microprobe analyses and stable isotopy in fracture‐related cements record the circulation of successive alternations of hydrothermal and low‐temperature meteoric fluids linked with three main regional tectonic events. The first event corresponds to the Mesozoic extension, which had two rifting stages, and it is characterized by the independent tectonic activity of two fault segments, namely southern and northern Hospital fault segments. During the Late Permian‐Middle Jurassic rifting, these segments controlled the thickness and distribution of the Triassic sediments. Also, dolomitization was produced in an early stage by Triassic seawater at shallow conditions. During increasing burial, formation of fractures and their dolomite‐related cements took place. Fault activity during the Middle Jurassic–Late Cretaceous rifting was localized in the southern segment, and it was characterized by hydrothermal brines, with temperatures over 180°C, which ascended through this fault segment precipitating quartz, chlorite, and calcite. The second event corresponds to the Paleogene compression (Chattian), which produced exhumation, folding and erosion, favouring the percolation of low‐temperature meteoric fluids which produced the calcitization of the dolostones and of the dolomite cements. The third event is linked with the Neogene extension, where three stages have been identified. During the syn‐rift stage, the southern segment of the Hospital fault grew by tip propagation. In the relay zone, hydrothermal brines with temperature around 140°C upflowed. During the late postrift, the Hospital fault acted as a unique segment and deformation occurred at shallow conditions and under a low‐temperature meteoric regime. Finally, and possibly during the Messinian compression, NW‐SE strike‐slip faults offset the Hospital fault to its current configuration.     

Role of compressive tectonics on gas charging into the Ordovician sandstone reservoirs in the Sbaa Basin,Algeria: constrained by fluid inclusions and mineralogical data

Structure‐ and tectonic‐related gas migration into Ordovician sandstone reservoirs and its impact on diagenesis history were reconstructed in two gas fields in the Sbaa Basin, in SW Algeria. This was accomplished by petrographical observations, fluid inclusion microthermometry and stable isotope geochemistry on quartz, dickite and carbonate cements and veins. Two successive phases of quartz cementation (CQ1 and CQ2) occurred in the reservoirs. Two phase aqueous inclusions show an increase in temperatures and salinities from the first CQ1 diagenetic phase toward CQ2 in both fields. Microthermometric data on gas inclusions in quartz veins reveal the presence of an average of 92 ± 5 mole% of CH₄ considering a CH₄‐CO₂ system, which is similar to the present‐day gas composition in the reservoirs. The presence of primary methane inclusions in early quartz overgrowths and in quartz and calcite veins suggests that hydrocarbon migration into the reservoir occurred synchronically with early quartz cementation in the sandstones located near the contact with the Silurian gas source rock at 100–140°C during the Late Carboniferous period and the late Hercynian episode fracturing at temperatures between 117 and 185°C, which increased in the NW‐direction of the basin. During the fracture filling, three main types of fluids were identified with different salinities and formation temperatures. A supplementary phase of higher fluid temperature (up to 226°C) recorded in late quartz, and calcite veins is related to a Jurassic thermal event. The occurrence of dickite cements close to the Silurian base near the main fault areas in both fields is mainly correlated with the sandstones where the early gas was charged. It implies that dickite precipitation is related to acidic influx. Late carbonate cements and veins (calcite – siderite – ankerite and strontianite) occurred at the same depths resulting from the same groundwater precipitation. The absence of methane inclusions in calcite cements result from methane flushing by saline waters.     

Quantitative analysis of COH fluids synthesized at HP–HT conditions: an optimized methodology to measure volatiles in experimental capsules

The quantitative assessment of COH fluids is crucial in modeling geological processes. The composition of fluids, and in particular their H₂O/CO₂ ratio, can influence the melting temperatures, the location of hydration or carbonation reactions, and the solute transport capability in several rock systems. In the scientific literature, COH fluids speciation has been generally assumed on the basis of thermodynamic calculations using equations of state of simple H₂O–nonpolar gas systems (e.g., H₂O–CO₂–CH₄). Only few authors dealt with the experimental determination of high‐pressure COH fluid species at different conditions, using diverse experimental and analytical approaches (e.g., piston cylinder + capsule piercing + gas chromatography/mass spectrometry; cold seal + silica glass capsules + Raman). In this contribution, we present a new methodology for the synthesis and the analysis of COH fluids in experimental capsules, which allows the quantitative determination of volatiles in the fluid by means of a capsule‐piercing device connected to a quadrupole mass spectrometer. COH fluids are synthesized starting from oxalic acid dihydrate at P = amb and T = 250°C in single capsules heated in a furnace, and at P = 1 GPa and T = 800°C using a piston‐cylinder apparatus and the double‐capsule technique to control the redox conditions employing the rhenium–rhenium oxide oxygen buffer. A quantitative analysis of H₂O, CO₂, CH₄, CO, H₂, O₂, and N₂ along with associated statistical errors is obtained by linear regression of the m/z data of the sample and of standard gas mixtures of known composition. The estimated uncertainties are typically <1% for H₂O and CO₂, and <5% for CO. Our results suggest that the COH fluid speciation is preserved during and after quench, as the experimental data closely mimic the thermodynamic model both in terms of bulk composition and fluid speciation.     

Invasion of a karst aquifer by hydrothermal fluids: evidence from stable isotopic compositions of cave mineralization

Mineral deposits in the Cupp‐Coutunn/Promeszutochnaya cave system (Turkmenia, central Asia) record a phase of hydrothermal activity within a pre‐existing karstic groundwater conduit system. Hydrothermal fluids entered the caves through fault zones and deposited sulphate, sulphide and carbonate minerals under phreatic conditions. Locally, intense alteration of limestone wall rocks also occurred at this stage. Elsewhere in the region, similar faults contain economic quantities of galena and elemental sulphur mineralization. Comparisons between the Pb and S isotope compositions of minerals found in cave and ore deposits confirm the link between economic mineralization and hydrothermal activity at Cupp‐Coutunn. The predominance of sulphate mineralization in Cupp‐Coutunn implies that the fluids were more oxidized in the higher permeability zone associated with the karst aquifer. A slight increase in the δ³⁴S of sulphate minerals and a corresponding δ³⁴S decrease in sulphides suggest that partial isotopic equilibration occurred during oxidation. Carbonate minerals indicate that the hydrothermal fluid was enriched in ¹⁸O (δ¹⁸O_SMOW ～ + 10‰) relative to meteoric groundwater and seawater. Estimated values for δ¹³C_DIC (δ¹³C_PDB ～ ? 13‰) are consistent with compositions expected for dissolved inorganic carbon (DIC) derived from the products of thermal decomposition of organic matter and dissolution of marine carbonate. Values derived for δ¹³C_DIC and δ¹⁸O_water indicate that the hydrothermal fluid was of basinal brine origin, generated by extensive water–rock interaction. Following the hydrothermal phase, speleothemic minerals were precipitated under vadose conditions. Speleothemic sulphates show a bimodal sulphur isotope distribution. One group has compositions similar to the hydrothermal sulphates, whilst the second group is characterized by higher δ³⁴S values. This latter group may either record the effects of microbial sulphate reduction, or reflect the introduction of sulphate‐rich groundwater generated by the dissolution of overlying evaporites. Oxygen isotope compositions show that calcite speleothems were precipitated from nonthermal groundwater of meteoric origin. Carbonate speleothems are relatively enriched in ¹³C compared to most cave deposits, but can be explained by normal speleothem‐forming processes under thin, arid‐zone soils dominated by C4 vegetation. However, the presence of sulphate speleothems, with isotopic compositions indicative of the oxidation of hydrothermal sulphide, implies that CO₂ derived by reaction of limestone with sulphuric acid (‘condensation corrosion’) contributed to the formation of ¹³C‐enriched speleothem deposits.     

Metamorphic and basin fluids in quartz–carbonate–sulphide veins in the SW Scottish Highlands: a stable isotope and fluid inclusion study

Metalliferous (Fe–Cu–Pb–Zn) quartz–carbonate–sulphide veins cut greenschist to epidote–amphibolite facies metamorphic rocks of the Dalradian, SW Scottish Highlands, with NE–SW to NW–SE trends, approximately parallel or perpendicular to regional structures. Early quartz was followed by pyrite, chalcopyrite, sphalerite, galena, barite, late dolomite–ankerite and clays. Both quartz–sulphide and carbonate vein mineralisation is associated with brecciation, indicating rapid release of fluid overpressure and hydraulic fracturing. Two distinct mineralising fluids were identified from fluid inclusion and stable isotope studies. High temperature (>350°C) quartz‐precipitating fluids were moderately saline (4.0–12.7 wt.% NaCl equivalent) with low (approximately 0.05). Quartz δ¹⁸O (+11.7 to +16.5‰) and sulphide δ³⁴S (?13.6 to ?1.1‰) indicate isotopic equilibrium with host metasediments (rock buffering) and a local metasedimentary source of sulphur. Later, low‐temperature (T_H = 120–200°C) fluids, probably associated with secondary carbonate, barite and clay formation, were also moderately saline (3.8–9.1 wt.% NaCl equivalent), but were strongly enriched in ¹⁸O relative to host Dalradian lithologies, as indicated by secondary dolomite–ankerite (δ¹⁸O = +17.0 to +29.0‰, δ¹³C = ?1.0 to ?3.0‰). Compositions of carbonate–forming fluids were externally buffered. The veins record the fluid–rock interaction history of metamorphic host rocks during cooling, uplift and later extension. Early vein quartz precipitated under retrograde greenschist facies conditions from fluids probably derived by syn‐metamorphic dehydration of deeper, higher‐grade rocks during uplift and cooling of the Caledonian metamorphic complex. Veins are similar to those of mesothermal veins in younger Phanerozoic metamorphic belts, but are rare in the Scottish Dalradian. Early quartz veins were reactivated by deep penetration of low‐temperature basin fluids that precipitated carbonate and clays in veins and adjacent Dalradian metasediments throughout the SW Highlands, probably in the Permo‐Carboniferous. This event is consistent with paragenetically ambiguous barite with δ³⁴S characteristic of late Palaeozoic basinal brines.     

Chemical profiling of a 130-year-old manuscript reveals the early use of synthetic lead white correction fluid in ancient China

In practice, correction fluid to mask text errors has been continuously in demand since papers began to be predominantly used since the late fourth century AD in ancient China. However, research on the trajectory of correction fluid composition has been largely overlooked and has not been revealed currently. In this study, a multianalytical approach was used to investigate a thin whiteout layer, used as correction fluids applied in 1890, on a book page from the famous Imperial Encyclopedia (1726 bronze-type repaint version). The results showed that the white layer was composed of hydrocerussite ((PbCO₃)₂·Pb (OH)₂) in mixture with plant oil and a tiny portion of calcium carbonate, which had been applied to conceal the originally printed Chinese characters upon which they were rewritten in preparing photographic negatives for reprinting using photolithography. The analysis results also suggest that lead white was likely domestically made using a local lead ore source by the wet synthetic process. Considering the prolonged use of orpiment (As₂S₃) as a correction fluid ingredient in Chinese tradition, a trajectory to lead white suggests not only advances in pulping and papermaking technology but also a shift in cultural habits and aesthetic psychology in the late Qing Dynasty.     

Fluid trapping at the brittle–ductile transition re-examined

The brittle–ductile transition has been suggested to provide a mechanical trap to deep crustal fluids. The mechanism was advanced as a way of reconciling the geophysical case for a wet lower crust, founded on the revelation of deep crustal electrical conductors and seismic reflectors, with the problem of maintaining interconnected, low‐density fluids in stable crust for geologically significant timescales. Although some deep crustal conductors are now attributed to graphite, the hypothesis of fluid trapping at the brittle–ductile transition has been widely adopted in electromagnetic literature, with no regard to tectonic regime, and in association with standardized temperatures of 300–450°C. Meanwhile, petrologists continue to argue that the lower crust is dry. This paper re‐examines the arguments on which the hypothesis of fluid trapping at the brittle–ductile transition has been founded, and concludes that there is a geophysical case for a dry lower crust based on electromagnetic studies. The magnetotelluric (MT) technique yields electrical conductances (conductivity–thickness products) that are direction dependent (or anisotropic). The necessity of considering direction‐dependent conductances, rather than a bulk conductance, is demonstrated using data from Saxothuringia, Germany. A quantitative model is developed to facilitate joint interpretation of the maximum conductance and the anisotropy of conductance (ratio of maximum to minimum conductance). The model yields quantitative arguments against fluids being the principal cause of deep crustal electrical conductivity, because unreasonably thick layers and unreasonably high porosities are required.