Static penetration assessment of stone weapon tip geometry metrics and comparison of static and dynamic penetration depths

Many factors governed the penetration efficacy of prehistoric projectile weaponry. Archaeologists broadly focus their efforts on understanding the effect of stone weapon tips because these specimens are often the only part of the weapon system that survives in the archaeological record. The tip cross-sectional area (TCSA) and perimeter (TCSP) of stone weapon tips have been shown to correlate with target penetration depth. Here, using results from both static and dynamic penetration testing, we compare TCSA and TCSP against other tip geometry metrics: lateral surface area (LSA) and volume (V). Our analyses broadly show that using a single-point geometry metric evaluated at multiple locations along the length of the point, or using multiple geometry metrics evaluated at a single location, better predicts required energy than using a single-point geometry metric evaluated at a single location. Our results also show that in the case where a single geometry metric evaluated at multiple locations is used LSA provided the most robust prediction models. Finally, our results show that for the case where all geometry metrics evaluated at a single location are used the location that provides the most robust prediction model is dependent on how far the point penetrated the target.     

Gyptis: Sailing Replica of a 6th‐century‐BC Archaic Greek Sewn Boat

A sailing replica based on the archaeological remains and structural analysis of the 6th‐century archaic Greek sewn boat Jules‐Verne 9 was built in Marseille as part of the city's European Capital of Culture 2013 programme. Full‐scale reconstruction allowed investigation of specific aspects of the methods used to build a shell‐first, sewn‐plank, and lashed‐frame vessel, as well as learning the gestures and know‐how of the original shipbuilders. The first two seasons of sailing trials, including short journeys in the Bay of Marseille and longer, coast‐hopping expeditions, reflecting the uses of the original vessel have taken place and are reported here.     

Identification Technique for Soil-Structure Analysis of the Ghirlandina Tower

Historical towers, in particular medieval towers, are an important part of cultural heritage, and their preservation mandates monitoring and detailed analyses of vulnerability under seismic actions as well as of their long-term performance. Certain aspects of structural nature are linked to the masonry behavior as a unilateral material, and other are aspects related to the interaction with soft soil conditions. This study aims to contribute to the aspects of preservation by exploring the role of the soil-structure interaction in predicting the behavior of the structures, with specific reference to the well-documented case history of the medieval Ghirlandina Tower (Modena, Italy). A significant contribution comes from an experimental identification analysis, performed in the presence of ambient vibration. A novel finding is that the soil structure interaction cannot be neglected, in contrast to most published identification analyses that usually assume the structure to have rigid constraint at base.     

Characterization of a Historical Cannonball from the Fortress of San Juan De Ulúa Exposed to a Marine Environment

Metallurgical analyses and chemical characterizations were carried out on historical cannonballs from the Fortress of San Juan de Ulúa, Veracruz, México. Cannonballs dating from the 18th and 19th centuries share metallurgical characteristics similar to those of material coming from a shipment of ammunition found in the wreck of a sunken French ship from the battle of Trafalgar. The analyses show that the base material is grey cast iron with a carbon equivalent of 4.94 and a ferritic–perlitic matrix, in which the high phosphorus content has led to the formation of iron phosphide compounds in conjunction with a homogeneous distribution of carbon graphite flakes of Type C. In addition, corrosion products from samples revealed the presence of various crystalline iron compounds (X‐ray diffraction), mostly highly chlorinated iron compounds identified as akaganeite. X‐ray fluorescence identified various characteristics of the corrosion products as a function of the sampling depth. FT–IR spectroscopy revealed that the main difference between the corrosion products (internal and external) is determined by the number of organic species. Differential scanning calorimetry corroborated that these corrosion products are thermally stable compounds at elevated temperatures.     

Bone Degradation and Environment: Understanding,Assessing and Conducting Archaeological Experiments Using Modern Animal Bones

Archaeological experiments that use modern bones to replicate past animal bone assemblages have often failed to consider the effects of environment, storage and preparation on modern bones. Often, these experiments make little mention of the conditions to which bones were subject during their storage and preparation for use in experiments. In other instances, these variables are reported but not considered as factors that contribute to the nature of the results obtained. This study considers previously reported data concerning the degradation of frozen bones (−20°C), and bones exposed to hot, dry conditions (40°C), and presents new data for bones exposed to room temperature environments (22°C) and refrigerated environments (2°C), and bones that are frozen (−20°C) and then thawed (22°C). These conditions are all relevant to understanding the nature of bone degradation and the use of bones in modern archaeological experimentation. This article also surveys a range of previously reported experiments that utilise modern bones to create analogies to the past and considers different methodological approaches and their relationship to the condition of bones at the time of their fracture and fragmentation. The longitudinal data presented in this study demonstrate differential rates of bone degradation over time in various environmental conditions. This degradation results in dramatic changes in bone fracture morphology, bone strength and utility for bone tool production. These observations have significant implications for experiments that utilise modern bones, especially when experimental data are used to create analogies to the archaeological past. Copyright © 2012 John Wiley & Sons, Ltd.     

Cut Mark Cluster Geometry and Equifinality in Replicated Early Stone Age Butchery

Early Stone Age cut marks created during tool‐assisted carnivory potentially offer inferences into hominin butchery behaviour and access to complete or defleshed carcasses. Actualistic butchery trials of 16 goat and cow half‐carcasses were completed by an experienced butcher with replicated Oldowan tools to investigate how the geometric organisation of cut mark clusters reflects flake versus core tool use and bulk muscle versus scrap defleshing. A cluster of cut marks is defined as a series of adjacent cut mark striations that occur at an anatomical location and are bounded by unmarked cortical surface. Tool type and butchery action were predicted to differentially mark certain long bone portions and influence cluster attributes. Moulds of 613 cut mark clusters were photographed and measured using ImageJ software (National Institutes of Health, Bethesda, Maryland, USA) for cluster area, cut mark count, median cut mark length and standard deviation of cut mark length and angle. Analysis suggests the following results: (i) cluster attributes are correlated;(ii) changes in cluster geometry are related to increasing cut mark count and length but not tool type or defleshed muscle amount; (iii) large clusters occur on large animals; and (iv) long bone midshaft portions are cut‐marked during both bulk and scrap muscle defleshing. Analysis of 179 cut mark clusters on long bone shafts of sizes 1–4 mammals from three Okote member assemblages at Koobi Fora, Kenya, shows that archaeological clusters have a similar number of marks when compared with experimental clusters but are significantly smaller, have shorter median marks and include less deviation in mark length and angle. Archaeological clusters corroborate that increasing area is positively correlated with cut mark count, median mark length and standard deviation of mark length and angle. A quantitative inferential model that links cut mark cluster geometry to tool type or the amount of muscle defleshed is not supported by these data. Copyright © 2015 John Wiley & Sons, Ltd.     

Milky Quartz Bipolar Reduction and Lithic Miniaturization: Experimental Results and Archaeological Implications

We present experimental data examining the energetics and identification of axial bipolar reduction in contexts of lithic miniaturization on milky quartz. These experiments answer two specific questions. First, does bipolar reduction provide any benefits over freehand reduction? Second, can axial bipolar reduction be distinguished from freehand reduction? Our data show that bipolar reduction requires significantly less time to reduce a percentage unit of core mass and to produce a millimeter of cutting edge on milky quartz than freehand reduction. Milky quartz bipolar reduction surpasses even the cutting edge production efficiency of obsidian pressure blades. We outline a series of quantitative criteria for identifying bipolar cores and flakes. Our results show that bipolar cores and flakes can be distinguished from those produced using freehand reduction by quantifying platform crushing, distal flake rebound scars, bulb shearing, as well as axial, bipolar, and splintered flake terminations. Our results challenge the widely held perceptions about the wastefulness of bipolar reduction and provide clear guidelines for identifying this reduction strategy in archaeological milky quartz assemblages.     

The Dover Boat—a Reconstruction Case-Study

The Bronze-Age Dover boat, reconstructed and published by Owain Roberts in 2004, is discussed in regard to the general considerations of reconstructing ancient boat structures in the previous paper. The archaeological evidence shows that the boat had a bottom shape different from that shown in the 2004 reconstruction, and various other aspects, such as the general shape and strength of the hull and the calculation of potential speed when paddled, are questioned, partly drawing on the author's experience with the reconstruction of the Hjortspring boat. A re-assessment of the evidence is called for before any attempts to build a full-scale version of the Dover boat for sea-trials.
© 2006 The Author