A contribution to the study of post-depositional alterations of pottery using TL dating analysis

In luminescence dating, the potassium concentration significantly contributes to the dose rate value in the age estimation. Within this study, fine-grain thermoluminescence dating has been applied on sherds of calcareous pottery of known age, excavated at a Roman site in Mallorca, Spain. For those of the samples that showed signs of severe potassium leaching, according to chemical and mineralogical examination, the thermoluminescence analysis provided overestimated dates. By using the known archaeological age of the samples, a corrected dose rate value can be estimated which provides the potassium concentration averaged for the burial period. Finally, a step-like model can then be used to estimate the fraction of the burial period after which most of the alteration effects took place.     

Age of the final Middle Palaeolithic and Uluzzian levels at Fumane Cave,Northern Italy,using C,ESR, U/Th and thermoluminescence methods

This article presents and discusses the chronological layout of the final Mousterian and Uluzzian levels of Fumane Cave in northern Italy using ¹⁴C, ESR and TL methods. Given its complex sedimentary and cultural succession, Fumane is a key site to assess the Middle–Upper Palaeolithic transition in Southern Europe and to explore Neanderthal behaviour and to compare it with the first Aurignacians. Large ranges defined by the ESR and TL dates cover the radiocarbon ages for units from A11 to A4, respectively, from 42.8 to 32.5 ka BP become progressively younger in agreement with the stratigraphy, despite high dispersions within the same unit. Our estimates using chronometric data seem to support the hypothesis that the sequence may cover almost 10,000 radiocarbon yr and that from comparison with the sedimentological and palaeoecological data, the late Middle Palaeolithic and the early Upper Palaeolithic at Fumane occur in sediments formed under moderately cool to mild climatic conditions correlated to the Hengelo-Interstadial, shifting towards cooler and drier conditions. Finally, comparisons between the Fumane data set and other sites in the North-Adriatic region are discussed.     

Optically stimulated luminescence dating of heated materials using single-aliquot regenerative-dose procedure: a feasibility study using archaeological artefacts from India

Optically stimulated luminescence (OSL) dating of heated/fired materials of archaeological importance from various parts of India was attempted. A single-aliquot regenerative-dose (SAR) procedure was used for palaeodose determination in the quartz grains extracted from the heated materials using the luminescence produced by blue light stimulation. In most pottery samples, the palaeodose obtained using SAR-OSL is ∼6% lower than the palaeodose measured using thermoluminescence (TL) method. Broadly, there is good agreement between the SAR-OSL and TL ages of the artefacts and their archaeologically expected ages. The results suggest that routine dating of heated/fired materials using the SAR-OSL procedure is more practicable, especially when the TL sensitivity of the quartz grains is poor and availability of datable material is limited.     

Combined archaeomagnetic and thermoluminescence study of a brick kiln excavated at Fontanetto Po (Vercelli,Northern Italy)

A combined archaeomagnetic and thermoluminescence study was carried out as part of a rescue archaeological excavation on a kiln discovered during the installation of methane gas pipelines beneath a rice field, along the southern border of Fontanetto Po village (Vercelli province, Italy). A total of 23 independent brick samples have been collected, oriented in situ with an inclinometer; the use of magnetic and sun compass was not possible due to the existence of metallic tubes beneath the kiln and a plastic cover above it. Standard archaeomagnetic procedures have been used for the determination of the archaeomagnetic inclination and absolute geomagnetic intensity. Stepwise thermal demagnetization shows a very stable characteristic remanent magnetization and the calculated mean inclination of the 23 samples is I = 65.3° with α₉₅ = 2.4° and k = 156. Archaeointensity experiments have been performed using the classical Thellier method as modified by Coe, with regular partial thermoremanent magnetization (pTRM) checks. The cooling rate and remanence anisotropy effects upon thermoremanent magnetization (TRM) have been investigated in all the specimens. A total of 19 archaeointensity determinations (at specimen level) that correspond to linear NRM–TRM plots were used for the calculation of the site mean archaeointensity that is 46.4 ± 2.9 μT. Archaeomagnetic dating results show two possible dating intervals for the last 1000 years, calculated at 95% confidence interval: a first one from 1511 to 1614 AD, and a second one from 1768 to 1872 AD. Thermoluminescence (TL) study has been also performed on two brick samples from the kiln's internal wall, using conventional laboratory procedures. According to the thermoluminescence results the kiln's last usage lies between 1796 and 1914 AD. This age is in good agreement with the second dating interval obtained by the archaeomagnetic analysis. The combined archaeomagnetic and thermoluminescence results suggest that the last firing of the kiln could have occurred between the end of the 18th century and the beginning of 20th century.     

Hayonim Cave: a TL-based chronology for this Levantine Mousterian sequence

The thermoluminescence dating method was applied to 77 heated flints from the Mousterian layers of Hayonim Cave in order to provide a precise TL-based chronology for this important Levantine sequence. A detailed dosimetric study was performed by using 76 dosimeter capsules and revealed strong spatial dose-rate variations. In parallel, Fourier transform infrared spectrometry enabled the identification of various mineral assemblages in the sediments of the cave and to localize the boundaries of these assemblages. By comparing these two data sets, it is shown that low dose-rate values (∼500 μGy/a) are systematically recorded in areas where the calcite-dahllite (CD) assemblage is preserved, whereas higher values (up to 1300 μGy/a) are associated with the leucophosphite, montgomeryite, variscite and siliceous aggregates (LMVS) assemblage. The dosimetric and mineralogical information was combined in order to assess, where possible, the dose-rate experienced by each flint during its burial. Some of the flint samples analyzed were too close to mineral assemblage boundaries and were therefore discarded. This rigorous selection led to TL ages ranging from 230 to 140 ka for the lower part of the Mousterian sequence (layers F and Lower E), which contains lithic industries characterized by blade production using the laminar method.     

前剂量热释光测定年代方法

分析了三种测量方法──多次激活、加剂量法和钉子技术的优缺点,并对细粒石英前剂量方法进行了专门研究。结果表明,细粒五英前剂量方法测量简便,减少了来自多次激活、试验剂量和归一引起的误差,最小可测年龄能达到几十年。     

Thermoluminescence Dating of Surface Lithic Artefacts from the Chacabuco Valley,Chilean Patagonia

This work presents several thermoluminescence (TL) dates of six archaeological sites located in the Andean valley of the Chacabuco River, central Patagonia. We discuss the advantages of this method to assess the chronology of human occupations, employing samples of lithic artefacts with evidence of fire exposure from surface contexts in the area. We compare the results with stratigraphic archaeological dating by ¹⁴C. We discuss these results in the context of previously formulated hypotheses on the past behaviour of the human population in this area.     

On the intrinsic accuracy and precision of luminescence dating techniques for fired ceramics

Luminescence dating techniques have been used extensively for archaeological and geological samples. Such techniques are based on thermally or optically stimulated signals. This paper presents simulations of several luminescence techniques for equivalent dose (ED) estimation for ceramic materials containing quartz. The simulations are carried out using a recently published comprehensive kinetic model for quartz, consisting of 11 electron and hole traps and centers. The complete sequence of the experimental protocols for several thermoluminescence (TL) and optically stimulated luminescence (OSL) techniques are simulated using the same set of kinetic parameters. The specific simulated protocols are: additive dose TL protocol, predose technique (both additive and multiple activation versions), phototransfer protocol, single aliquot regenerative optically stimulated luminescence (SAR-OSL) protocol, and SAR thermoluminescence protocol (SAR-TL). One hundred random variants of the natural samples were generated by keeping the transition probabilities between energy levels fixed, while allowing simultaneous random variations of the concentrations of the 11 energy levels. The relative intrinsic accuracy and precision of the protocols are simulated by calculating the equivalent dose (ED) within the model, for a given natural burial dose of the sample. The intrinsic accuracy of these techniques is estimated by simulating natural irradiation of the samples with a known burial dose, followed by simulation of the luminescence method used to recover the estimated dose ED. The percent difference between the burial dose and the ED value represents the simulated accuracy of the luminescence technique. The relative intrinsic precision of these techniques is estimated by fitting Gaussian probability functions to the ED values obtained with the 100 model variants. It is found that the various techniques can reproduce natural paleodoses in the range 10 mGy–10 Gy with a typical intrinsic accuracy of +1 to 10%. Techniques based on single aliquot protocols were found in general to be more precise than techniques requiring the use of multiple aliquots. In addition, techniques based on interpolation of experimental data were found to be consistently both more precise and accurate than those based on extrapolation of experimental data.     

古代瓷器热释光测定年代制样方法的比较与研究

为了对古代瓷器热释光年代测定的两种不同制样方法——粉末法和薄片法的优劣进行比较,本工作从热释光灵敏度的均值标准偏差、三点回归的线性相关程度以及最后所测得年代与真值的符合情况等方面进行研究。研究结果表明,粉末法的测量精确度、准确度及可靠性均优于薄片法。粉末法可作为行业内制样标准参考。