A new approach to recording and monitoring wet-preserved archaeological wood using three-dimensional laser scanning

The analysis and preservation of organic materials preserved within wetland environments represents one of the most costly parts of any post-excavation strategy. This paper outlines the application of high-resolution terrestrial laser scanning to one class of preserved material, worked archaeological wood. Scanning allowed the recording of the artefacts in three dimensions and the identification of features such as toolmarks. Features can be measured and volumetrically modelled within the digital environment, which may not always be possible for these often fragile materials using conventional techniques. Repeat scanning of the artefacts provided an opportunity to use comparative analysis software to investigate changes in the morphology of artefacts under contrasting conditions of short-term storage. The results suggest that immersion in water results in the least deterioration, whereas both freezing and air-drying caused distortion and degradation. This paper demonstrates that laser scanning provides a viable alternative post-excavation method for the recording, analysis and long-term ‘virtual archiving’ of organic archaeological materials, which may be more cost-effective in some instances than other methods of preservation.     

Full‐Vector Archaeomagnetic Dating of a Medieval Limekiln at Pinilla Del Valle Site (Madrid,Spain)

Archaeomagnetic dating based on the full geomagnetic field vector was carried out on a limekiln excavated at Pinilla del Valle archaeological site (Madrid, Spain). The limekiln tradition in this area is largely documented by historical sources for recent centuries but the date of the studied kiln's last use was unknown. The combination of mean archaeomagnetic directional and absolute archaeointensity results shows that the kiln was last used between ad 1296 and 1413, in good agreement with two independent radiocarbon dates. This study provides the first archaeomagnetic evidence that the local limekiln tradition dates back to at least late medieval times. Furthermore, the inclusion of these data in the Iberian secular variation curve and geomagnetic field models will help to improve the archaeomagnetic dating technique.     

From flow to quarry: magnetic properties of obsidian and changing the scale of archaeological sourcing

Previous studies have endeavored to use petrophysical traits of obsidian, particularly its magnetic properties, as an alternative to conventional geochemical sourcing, one of the greatest successes in archaeological science. Magnetic approaches, however, have not seen widespread application due to their mixed successes. In a time when geochemical analyses can be conducted non-destructively, in the field, and in a minute or two, magnetic measurements of obsidian must offer novel archaeological insights to be worthwhile, not merely act as a less successful version of geochemistry. To this end, we report the findings of our large-scale study of obsidian magnetism, which includes 734 geological obsidian specimens and 97 artifacts measured for six simple magnetic parameters. Based on our results, we propose, rather than using magnetic properties to source artifacts to a particular obsidian flow (inter-flow sourcing), these properties are best used to differentiate quarrying sites within an individual flow (intra-flow sourcing). Our results also demonstrate that certain magnetic properties are highly affected by ancient knappers' material selection criteria. Furthermore, depending on the spatial scales of variation, which likely vary from flow to flow, we envision several potential applications of this approach, including integration into minimum analytical nodule analysis (MANA). Magnetic data appear to shift the scale of obsidian sourcing from flows to quarries and, in turn, enable new insights into raw-material procurement strategies, group mobility, lithic technology, and the organization of space and production.     

Latest developments in rock art recording: towards an integral documentation of Levantine rock art sites combining 2D and 3D recording techniques

This paper presents a further step in the integral documentation of prehistoric rock art, combining 2D and 3D digital recording techniques. Image processing and digital enhancement techniques are an invaluable aid to obtain high quality and accurate 2D recordings, especially when working with faint motifs or complex superimpositions. But what constitutes a real breakthrough is the possibility of combining 2D digital tracings with metric 3D models, providing a whole set of metric outputs that improve our understanding of the motifs in their context and, at the same time, can be used to deliver accurate metric reproductions.     

Using mineral magnetism to characterise ironworking and to detect its evidence in peat bogs

An experimental approach has been used to establish whether medieval ironworking activity could be identified in peat bogs using mineral magnetic measurements. The research project comprised three elements. First, magnetic susceptibility and remanence properties were obtained for materials from an experimental iron smelt, in a furnace of medieval design, and from material collected during the excavation of the medieval bloomery at Llwyn Du in Coed y Brenin, Snowdonia. Materials sampled and measured included charcoal, aerial dust, roasted bog ore and furnace dust. A second experiment determined whether small amounts of aerial dust released from the furnace could be detected in accumulating peat samples. This was achieved by sprinkling small quantities of dust on to a constructed ’peat core’ that had no detectable magnetic signature prior to the addition of the dust. The application rates used were within the range expected to fall on a peat bog located close to a medieval furnace. Thirdly, mineral magnetic measurements were made on a peat core collected close to the Llwyn Du bloomery. The results confirm that roasted bog ore, aerial dust released from and dust accumulating in the furnace after a smelt, are magnetically detectable. The aerial dust and roasted bog ore produced enhanced susceptibility and remanence signatures in the constructed ’peat core’ experiments. Peaks in IRM_(0.88T) and HIRM were measured in the Llwyn Du peat monolith and appear to correlate with a time when the medieval bloomery was operational. The results presented here suggest that it is possible to identify evidence of past ironworking in peat bogs using mineral magnetic measurements and that the signatures remain well preserved in the peat record even after burial for several hundred years.     

Taphonomic analysis of leporid remains obtained from modern Iberian lynx (Lynx pardinus) scats

Distinguishing leporid bones accumulated by diurnal raptors, owls, mammals and humans is essential to understand not only past human subsistence activities but also past ecology. This is particularly relevant in Iberian Palaeolithic sites where leporid remains usually constitute the most abundant taxon. As far as terrestrial mammal carnivores are concerned, the Iberian lynx (Lynx pardinus) would be the main leporid predator in the Iberian Peninsula. Up until now its contribution as a rabbit bone accumulator in archaeological sites has never been properly assessed. In order to investigate the taphonomic signature of this predator the analysis of 33 samples of modern Iberian lynx scats was carried out. Results show that leporid remains consumed by this carnivore appear very fragmented and exhibit a strong degree of corrosion digestion. Cranial elements are most abundant followed by long bones. Whereas there seem to be clear differences in relation to breakage and digestion alteration caused by owls, some of the patterns obtained are closest to those established with diurnal raptors.     

Deformation of Ancient Buildings inferred by Terrestrial Laser Scanning methodology: the Cantalovo church case study (Northern Italy)*

The study of the health of a building connects humanistic and scientific research, and a complete characterization can be achieved by integrating all the available historical documentation, architectural and metrological studies, as well as laboratory and in situ analyses of the materials. A contactless, non‐invasive surveying technique such as terrestrial laser scanning (TLS) allows the acquisition of dense and accurate geometric and radiometric (electromagnetic measurements such as signal intensity) information about the observed surface of the building, which can be easily integrated with data provided by high‐resolution digital imaging. The early Christian Cantalovo church was surveyed for the first time in April 2011, by means of the ILRIS‐3D ER very long range scanner. The second and last survey was performed in June 2012, after the main shocks of the Emilia earthquake seismic sequence. A very long range instrument is suitable for fast, simple and independent measurements, due to its technical characteristics and, for this reason, is easily usable for accurate surveying in emergency conditions. The main results are obtained by applying a data analysis strategy based on the creation of TLS‐based morphological maps computed as point‐to‐primitive differences, which allow the creation of a deformation map and its evolution in time.     

Integrating radar and laser-based remote sensing techniques for monitoring structural deformation of archaeological monuments

Ground-Based Synthetic Aperture Radar Interferometry (GBInSAR) and Terrestrial Laser Scanning (TLS) were purposely integrated to obtain 3D interferometric radar point clouds to facilitate the spatial interpretation of displacements affecting archaeological monuments. The paper describes the procedure to implement this integrated approach in the real-world situations of surveillance of archaeological and built heritage. Targeted tests were carried out on the case study of the Domus Tiberiana sited along the northern side of the Palatino Hill in the central archaeological area of Rome, Italy, and displacements of the monument were monitored over almost one year of acquisition. The GBInSAR – TLS integration provided updated information about the condition of the archaeological structures in relation to their history of instability mechanisms, and did not highlighted a general worsening for the stability of the entire monument. Point-wise and prompt detection of displacement anomalies and/or sudden changes in displacement trends proved the suitability of the method to support early warning procedures, also to evaluate effects on the masonry due to human activities.     

3D model of the Can Sadurní cave

Graphic and metric information about the site and its environment and about the different structures and artefacts located are indispensable for the optimal management of an archaeological excavation. A Geographic Information System (GIS) proves useful in managing and analysing information and data obtained from different sources. Two techniques of data capture, Terrestrial Laser Scanning (TLS) and close range photogrammetry, are used to generate accurate and high-resolution 3D models of a cave, the silos and a combustion structure at the Can Sadurní site (Begues, NE Spain). This site is especially noteworthy on account of its complete stratigraphy of the Catalonian Holocene. The capture and processing of the photogrammetric and TLS data used to generate 3D models are discussed in detail. These models cannot be obtained by classic archaeological techniques since the record is made layer by layer, approximately one decimetre apart, with the result that the information between the layers is lost. Our findings highlight the potential of these techniques for obtaining accurate and photorealistic models that facilitate a complete analysis of the available information at an archaeological site.