Constant and Variable Amplitude Cyclic Behavior of Welded Steel Beam-to-Column Connections

This article presents a study on welded beam-to-column joints of moment-resisting steel frames. The main features of the joint specimens are summarised, in order to identify key parameters influencing the joint response as well as their low-cycle fatigue endurance. The cyclic behavior and the low-cycle fatigue strength of the connections were initially assessed by cyclic quasi-static testing, carried out at the Technical University of Milan. Analysis of the results has been carried out in order to verify the validity of a linear damage accumulation model combined with a low-cycle fatigue approach based on S-N lines concept. Moreover, a criterion to predict the type of failure and a procedure of appraising the fatigue endurance are presented and their validity proved by the results of variable amplitude tests.     

Shake Table Test and Numerical Analysis of a Bridge Model Supported on Elastomeric Pad Bearings

Elastomeric pad bearings are widely applied in short- to medium-span girder bridges in China, with the superstructure restrained by reinforced concrete (RC) shear keys in the transverse direction. Field investigations after the 2008 Wenchuan earthquake reveal that bearing systems had suffered the most serious damage, such as span falling, bearing displaced, and shear key failure, while the piers and foundations underwent minor damage. As part of a major study on damage mechanism and displacement control method for short- to medium-span bridges suffered in Wenchuan earthquake, a 1:4 scale, two-span bridge model supported on elastomeric pad bearings were recently tested on shake tables at Tongji University, Shanghai. The bridge model was subjected to increasing levels of four seismic excitations possessing different spectral characteristics. Two restraint systems with and without the restraint of RC shear keys were tested. A comprehensive analytical modeling of the test systems was also performed using OpenSees. The experimental results confirmed that for the typical bridges on elastomeric pad bearings without RC shear keys, the sliding effect of the elastomeric pad bearings plays an important role in isolation of ground motions and, however, lead to lager bearing displacement that consequently increases the seismic risk of fall of span, especially under earthquakes that contain significant mid-period contents or velocity pulse components. It is suggested from the test results that RC shear keys should be elaborately designed in order to achieve a balance between isolation efficiency and bearing displacement. Good correlation between the analytical and the experimental data indicates that the analytical models for the bearing and RC shear key as well as other modeling assumptions were appropriate.     

Seismic Vulnerability Assessment of an Infilled Reinforced Concrete Frame Structure Designed for Gravity Loads

In the last decades, particular attention has been paid to the seismic vulnerability of existing reinforced concrete buildings designed for gravity loads only. Such buildings, designed before the introduction of capacity design in modern seismic codes, are very common, particularly in seismic prone countries of the Mediterranean area. Due to poor detailing and lacking of capacity design principles, high vulnerability has been highlighted in several past studies. In this article, inadequate seismic response and peculiar damage pattern are investigated by means of shake table tests performed on a 1:2 scaled 3-story infilled prototype. Particular attention is given to the role of beam-column joints and frame-panel interaction. The effectiveness of the EC8-based assessment approach is then evaluated; both linear and nonlinear numerical models, with different levels of sophistication, have been implemented in order to explore their behavioral aspects.     

Pushover Analyses of Hand-Loaded Steel Storage Shelving Racks

Among the various types of industrial solutions used to store goods and products, the light duty hand loaded shelving rack (SR) typology represents a very popular solution for domestic applications, libraries and for superstores/markets open to the public. Despite the limited cost, an eventual collapse could result in significant damage of stored goods, injuries, and potentially the loss of human life, with the possible consequence of a long suspension of commercial activities. This reflects directly on the great importance of a correct design that, despite the large use of SRs, is nowadays developed with approaches characterized by inadequate levels of reliability.

A research program on SRs is currently in progress in Italy, with the aim of improving the rules for both static and seismic design and this article presents a combined experimental-numerical study. Both component and pushover tests have been carried out, that are shortly summarized. Overall frame response has been simulated by means of advanced finite element software able to capture key features of the nonlinear response of slender frames with mono-symmetric cross-section members.     

Full-Scale Shaking Table Tests on a Substandard RC Building Repaired and Strengthened with Post-Tensioned Metal Straps

The effectiveness of a novel Post-Tensioned Metal Strapping (PTMS) technique at enhancing the seismic behavior of a substandard RC building was investigated through full-scale, shake-table tests during the EU-funded project BANDIT. The building had inadequate reinforcement detailing in columns and joints to replicate old construction practices. After the bare building was initially damaged significantly, it was repaired and strengthened with PTMS to perform additional seismic tests. The PTMS technique improved considerably the seismic performance of the tested building. While the bare building experienced critical damage at an earthquake of PGA = 0.15 g, the PTMS-strengthened building sustained a PGA = 0.35 g earthquake without compromising stability.     

Lightly Reinforced Walls Subjected to Seismic Excitations: Interpretation of CAMUS 2000–1 and 2000–2 Dynamic Tests

In this article a study is presented of the inelastic seismic performance of two 5-story reinforced concrete wall specimens, which were tested in the context of the CAMUS 2000 program. The structure has been sized and detailed following the French PS92 code. To investigate the simplifying assumptions made in design, a 3-D refined nonlinear analysis was conducted. Particular aspects of the behavior of the two tested specimens are presented and then test results are compared with numerical predictions. The experimental-analytical comparisons not only demonstrate the accuracy of the time-history analysis model, but also allow obtaining more detailed information about the behavior of the specimen when it is subjected to seismic excitation. The significant effect of degradation of the stiffness and strength of the wall suggests that it is always important that design procedures are derived from numerical modeling and experimental observations.     

Direct Acceleration Feedback Control of Shake Tables with Force Stabilization

This study presents a new strategy for shake table control that uses direct acceleration feedback without need for displacement feedback. To ensure stability against table drift, force feedback is incorporated. The proposed control strategy was experimentally validated using the shake table at the Johns Hopkins University. Experimental results showed that the proposed control strategy produced more accurate acceleration tracking than conventional displacement-controlled strategies. This article provides the control architecture, details of the controller design, and experimental results. Furthermore, the impact of input errors in shake table testing on the structural response is also discussed.     

Application of In-Test Model Updating to Earthquake Structural Assessment

Analytical methods are frequently utilized for structural assessment due to their simplicity and cost-effectiveness. However, modeling of material inelasticity and geometric nonlinearity under reversed inelastic deformations is still very challenging and its accuracy is difficult to quantify. On the other hand, realistic experimental assessment is costly, time-consuming, and impractical for large or spatially extended structures. Hybrid simulation has been developed as an approach that combines the realism of experimental techniques with the economy of analytical tools. In hybrid simulation, the structural is divided into several modules such that the critical components are tested in the laboratory, while the rest of the structure is simulated numerically. The equations of motion solved in the computer enable the integration of the analytical and experimental components at each time increment. The objective of this article is to apply a newly developed identification and model updating scheme to acquire the material constitutive relationship from the physically tested specimen during the analysis to two complex hybrid simulation case studies. The identification scheme is developed and verified in a companion article, while the two experiments presented in this article are selected such that they address different structural engineering applications. First, a beam-column steel connection with heat treated beam section is analyzed. Afterwards, the response of a multi-bay concrete bridge is investigated. The results of these two examples demonstrate the effectiveness of model updating to improve the numerical model response as compared to the conventional hybrid simulation approaches.     

Experimental Analysis of Bolted Steel Beam-to-Column Connections: Component Identification

In this paper, the results of an experimental program dealing with the ultimate behavior of bolted beam-to-column connections under cyclic actions are presented. The design criteria adopted for tested specimens are discussed in detail, aiming to point out how the ultimate behavior can be governed by properly strengthening the components for which yielding has to be prevented. To this scope, the component approach is adopted as a design tool for component hierarchy criteria. The aim of the paper is the investigation of the actual possibility of extending the component approach to the prediction of the cyclic response of beam-to-column joints. To this scope, the attention has been focused on the possibility to evaluate the overall energy dissipation capacity starting from the energy dissipation of the single joint components, provided that they are properly identified and their cyclic behavior is properly measured.     

Experimental Investigation of Exterior Unreinforced Beam-Column Joints with Plain and Deformed Bars

Experimental tests on four full-scale exterior unreinforced reinforced concrete (RC) beam-column joints, representative of the existing non-conforming RC frame buildings, are carried out. The specimens have different longitudinal reinforcements (plain or deformed) and they are designed in order to be representative of two typical design practices (for gravity loads only or according to an obsolete seismic code). Different failure modes are observed, namely joint failure with or without beam yielding. The local response of the joint panel is analyzed. The different joint deformation mechanisms and their contribution to the deformability and to the energy dissipation capacity of the sub-assemblages are evaluated.