An Applied Method for General Regional Seismic Loss Assessment—With A Case Study in Los Angeles County

We describe the formulation and application of an integrated general regional seismic loss assessment (RSLA) method for buildings in seismic regions. An efficient method for RSLA is valuable for engineers involved in city planning, risk management, and insurance dealings. In contrast to previously reported methods, the framework presented herein is hazard-based and utilizes a regional rapid seismic hazard deaggregation tool that allows regional assessment to be conducted more efficiently. The proposed technique is implemented as an example to assess general regional seismic loss in Los Angeles County for a ground motion hazard with 10% probability of exceedance in 50 years.     

Assessment of Effects of Reductions of Lateral Stiffness along Height on Buildings Modeled as Elastic Cantilever Shear Beams

A simplified model useful for assessing economic losses due to moderate seismicity events in urban areas has been developed by studying the behavior of buildings before yielding their structural system, allowing for nonuniform stiffness along their height. In particular, buildings are modeled as cantilever shear beams with uniform mass and parabolic reduction of lateral stiffness. This particular stiffness distribution is relevant, as it could be expected to occur in buildings where earthquake action is a critical structural design criterion. The equation of motion governing the dynamic behavior of the proposed model is solved analytically, finding mode shapes in terms of first and second zero-order Legendre functions. The solution is verified by comparing it with results obtained from fine mesh finite element models. The effect of reducing the lateral stiffness is then studied in the first five modes of vibration. Results include modal periods, mode shapes, modal participation factors, and derivatives of mode shapes. In general, it is found that effects of reduction of lateral stiffness in mode shapes are moderate when the lateral stiffness in the free end is smaller than about seventy percent of the lateral stiffness at the fixed end, but become significant for larger reductions. Effects are particularly important for the derivative of the mode shapes, which could play a significant role in estimating interstory drift demands in buildings. Model usefulness is showcased by analyzing a test case where both acceleration and drift demands are assessed by considering uniform beams and beams with parabolic stiffness variation, finding notable improvements by considering the latter.     

Smart Lead Rubber Bearings Equipped with Ferrous Shape Memory Alloy Wires for Seismically Isolating Highway Bridges

Shape memory alloys (SMA) can substantially improve the damping capacity and re-centering capability of elastomeric isolators. The objective of this study is to assess the seismic performance of smart lead rubber bearings (LRBs) equipped with double cross ferrous SMA wires. Hysteretic shear response of SMA wire-based LRB is determined using finite element method. The seismic response of a multispan continuous steel girder bridge isolated by SMA-LRB is evaluated. Hybrid SMA-LRB bearing exhibits a significantly lower shear strain demand (up to 46% reduction) and a higher energy dissipation capacity (up to 31% increase) compared to the LRB.     

Earthquake Resilience of Reinforced Concrete Structural Walls with Replaceable “Fuses”

The concept of providing a fuse in a structural system has been both developed and investigated over the past few years (e.g., the use of replaceable links in eccentrically braced frames or the use of replaceable links in the new San Francisco-Oakland Bay Bridge). This paper presents a new coupling beam with a creative fuse installed in the mid-span of a steel-concrete composite beam via an end plate and high-strength bolts. First, a practical design methodology of a replaceable coupling beam is presented. Next, the seismic behavior of the proposed fuse is tested and evaluated, and two structural wall specimens with or without a fuse are designed and fabricated according to the proposed design methods. The two specimens possess similar shear capacities under large-scale cyclic loading, and the walls of the two specimens show similar failure modes; however, the new walls exhibit slightly lower levels of damage than the conventional walls. In particular, the inelastic deformation and damage of replaceable coupling beams are mainly concentrated in the fuse, whereas the non-yield segment and the beam-wall pier interfaces remain nearly intact and produce only slight damage, which is beneficial regarding the replacement of the fuse in post-earthquake events.     

Controlled Rocking CLT Walls for Buildings in Regions of Moderate Seismicity: Design Procedure and Numerical Collapse Assessment

Controlled rocking heavy timber walls are designed to rock on their foundations in response to earthquakes. For regions of moderate seismicity, it is proposed that this rocking behaviour can be adequately controlled using only post-tensioning, even with a large force-reduction factor and no supplemental energy dissipation. This article presents a force-based design procedure for controlled rocking cross-laminated timber walls without supplemental energy dissipation, including a method for estimating higher mode effects. Fragility analyses of three prototype walls demonstrate that the procedure can limit the probability of collapse to <10% during a maximum considered earthquake in a region of moderate seismicity.     

宁明花山岩画区危岩体稳定研究

花山岩画区的危岩体的存在严重危及古岩画的保存和游客的安全,使得旅游业遭到重创。为了对区内危岩体状态做出评价,并为其后期治理工程提供依据,通过对岩画区的环境地质条件和病害成因的调查,结合危岩体的形态和结构特征,分析得出了区内危岩体崩塌破坏的三种模式为倾倒式崩塌、错断式崩塌和拉裂式崩塌,并提出了不同破坏模式的力学模型。应用极限平衡法对不同破坏模式的危岩体进行了稳定性计算分析,得出区内危岩体大部分处于欠稳定状态,须进行治理。最后提出了危岩体的防治原则与措施。     

2015尼泊尔地震后加德满都谷地世界文化遗产破坏特征

2015尼泊尔地震对加德满都谷地的世界文化遗产造成不可估量的损失。为了探究谷地文化遗产震害整体分布特征,对谷地世界文化遗产建筑的震害状况开展实地调查,划分了三类文化遗产震害等级标准,形成了六处世界文化遗产的震害图并对其进行统计分析,加德满都、帕坦和巴德岗三处杜巴广场震后保存基本完好的文化遗产建筑占各自总数的39.5%、53.3%、50%,斯瓦扬布纳特寺、昌谷纳拉扬寺和博达哈大佛塔主体保存基本完好,附属建筑不同程度地破坏。加德满都、帕坦和巴德岗三处杜巴广场地层的松软沉积层放大地震效应使建筑严重破坏,斯瓦扬布纳特寺、昌谷纳拉扬寺震害主要受地形特征影响。考察成果为我国同类遗产建筑的抗震防护提供参考。     

白居塔塔体结构稳定性分析研究

在对白居塔建筑形制调查研究基础上,区分塔体内嵌高山体和内嵌低山体两种情况,确定重力作用以及重力和地震耦合作用两种工况。基于采用岩土摩尔—库伦本构模型的有限元分析技术,对白居塔和山体的耦合结构进行稳定性分析。得出以下结论:自重作用下,整体结构稳定性满足,且有较高的安全稳定系数;白居塔整体结构的刚度较大,整个结构体系属于抗震有利体系;白居寺整体结构基频模态以侧倾为主;在7°(基本加速度0.15 g)多遇地震作用下,两个模型整体结构的抗震稳定性较好,结构不会产生整体性失稳破坏;在8°(基本加速度0.3 g)多遇地震作用下,较高山体模型主体结构基本处于安全状态,较低山体模型主体结构不满足稳定要求;较高山体的模型相对于较低山体的模型,安全稳定性要高。     

Sustainability of Highway Bridge Networks Under Seismic Hazard

In order to evaluate the seismic risk of transportation networks, it is necessary to develop a methodology that integrates the probabilities of occurrence of seismic events in a region, the vulnerability of the civil infrastructure, and the consequences of the seismic hazard to the society, environment, and economy. In this article, a framework for the time-variant seismic sustainability and risk assessment of highway bridge networks is presented. The sustainability of the network is quantified in terms of its social, environmental, and economic metrics. These include the expected downtime, expected energy waste and carbon dioxide emissions, and the expected loss. The methodology considers the probability of occurrence of a set of seismic scenarios that reflect the seismic activity of the region. The performance of network links is quantified based on individual bridge performance evaluated through fragility analyses. The sustainability and risk depend on the damage states of both the links and the bridges within the network following an earthquake scenario. The time-variation of the sustainability metrics and risk due to structural deterioration is identified. The approach is illustrated on a transportation network located in Alameda County, California.     

Development of Collaborative Structure Analysis (CSA) System and Its Application to Investigate Effects of Soil-Structure Interaction

In this article, a collaborative structure analysis (CSA) system is developed for integrating different finite-element simulation programs. In this system, a simulated structure is divided into multiple substructures, and the interaction between the substructures is considered. Interfaces for the commercial finite-element program ABAQUS and for an open-source framework for structure analysis, OpenSees, are developed to achieve CSA integration. The CSA system is applied to analysis of a soil-structure interaction (SSI) problem, and the effects of SSI are investigated, and the efficiency and accuracy of the system are demonstrated.