HISPANO-MORESQUE POTTERY PRODUCTION OF THE FOURTEENTH-CENTURY WORKSHOP OF TESTAR DEL MOLÍ (PATERNA,SPAIN)

Excavation of Testar del Molí, the only workshop found in the Manises-Paterna area, revealed the existence of a fourteenth-century ceramic workshop covering the remains of the thirteenth-century workshop. This study is concerned with the fourteenth-century production, and forthcoming papers will connect both epochs following the findings of current excavations. The chemical and mineralogical characterization of the ceramic production of this workshop shows the presence of three groups of ceramic pastes which could also be distinguished by, and, thus, related to, their daily use. The raw materials found in the excavation have also been mineralogically and chemically characterized, and a model of possible mixtures of raw materials has also been developed in order to determine their possible use in the manufacture of the pottery previously characterized.     

TECHNOLOGY AND COLOUR DEVELOPMENT OF HISPANO-MORESQUE LEAD-GLAZED POTTERY

Lead-glazed pottery from the medieval workshop of Les Olleries Majors (Paterna, Spain) has been studied by Mössbauer spectroscopy, X-ray diffraction, X-ray fluorescence and optical spectroscopy. Yellow, brown and honey-coloured glazes occur on pots glazed on only one surface. They have virtually identical compositions and transmittance spectra, their apparent differences in colour are due to the colours of the underlying pastes. Yellow glazes occur on cream-coloured calcareous bodies, honey-coloured glazes occur on less calcareous bodies with some development of hematite, while brown glazes occur on red siliceous cooking-pots. Green glazes are found on pots glazed on both surfaces; the glazes trapped CO₂ evolved by decomposing carbonates, resulting in an internal reducing environment. This caused the reduction of iron to the ferrous state which coloured the glaze green by diffusion.     

ALTERATION PROCESSES OF POTTERY IN LAGOON‐LIKE ENVIRONMENTS

Post‐depositional processes in pottery can give rise to chemical and mineralogical alterations, the extent of which is closely related not only to the microstructure and composition of the potsherds, but also to the chemical–physical conditions of the burial environment. The present paper describes the characterization of post‐depositional alterations and identification of processes involving pottery buried in lagoon‐like environments. A set of various types of Roman transport amphorae and African Red Slip ware (ARS), collected from two archaeological sites characterized by a lagoon‐like depositional environment and showing evident changes in the original colours, was analysed by a combination of microstructural, mineralogical and microchemical approaches. The formation of pyrite after hematite, jarosite after pyrite and microstructural substitution features are interpreted here in terms of the chemico‐physical conditions of the burial environment and their evolution in time.     

FIRING ANALYSIS OF SOUTH-EASTERN MISSOURI INDIAN POTTERY USING IRON MÖSSBAUER SPECTROSCOPY*

The Mössbauer spectra of prehistoric pottery and clay from the Malden Plain of south-eastern Missouri, USA, were examined. The pottery dates from AD 500 to 1400. The earlier sherds were tempered with sand and the later ones with shell. The sherds and clay contain a mixture of illite, smectite, and kaolinite. Most samples of clay and sherds contained both ferric and ferrous species. The spectral parameters for the ferric species were %DLE_Q～0. 7—1.1 mms^-1 and δ～0.0–0.3 mms^-1 for the ferrous species, ΔE_Q～2.1–2.7mms^-1 and δ～0.7–1.0mms^-1. The ferric to ferrous ratio is more accurately determined from the spectra than from consideration of the colour or the firing core of the sherds, which are not always related to the iron species ratio. Differences among sherds in the ferrous ΔE_Q can be related to original temperature of heating but with low precision.     

OBSIDIAN IN THE MEDITERRANEAN AND THE NEAR EAST: A PROVENANCING SUCCESS STORY

Obsidian provenancing studies comprise one of the most productive and successful research programmes of archaeological science. Obsidian characterization has been successful because workable obsidian is homogeneous on a small scale, analysable by a large number of methods, and is restricted to a small number of mainly readily distinguishable geological sources. Analytical, dating, source, and trade studies within the western Mediterranean, central and eastern Europe, the Aegean, and Anatolia and the Near East during the last 30 years or so are reviewed. Research has shown that distributions are mainly separate in the four regions examined, and that obsidian was traded up to 900km in the prehistoric period. Publications on obsidian in the areas under review reached a peak of frequency in the later 1970s and 1980s, but have now decreased in number. This may reflect changing fashions in archaeometric studies, and a current lack of routine application of the provenancing methods developed.     

‘DE CAERIMONIAE’ TECHNOLOGICAL CHOICES IN COPPER‐SMELTING FURNACE DESIGN AT EARLY BRONZE AGE CHRYSOKAMINO,CRETE*

The excavation of a number of Early Bronze Age sites in the Aegean has recovered perforated ceramic fragments. Archaeometallurgical analysis of slag adhering to these fragments indicates that they are the remains of copper‐smelting furnaces. Despite compelling analytical data supporting this identification, no attempt has been made, thus far, to establish how these unusual furnaces may have operated. The use of perforations is poorly understood and can be considered a counter‐intuitive solution for the reduction of oxidic copper ores. The experiments reported here explore the possible technological choices made by the ancient metalworkers of Chrysokamino to ensure the effective reduction of copper minerals. Temperature data and slag samples were obtained to ascertain the technical performance of the furnace structure with, and without, perforations. Possible reasons are given for the use of a perforated design, and the implications of such technological choices are considered.     

THE BLUE ENAMELS IN THE BAROQUE DECORATIONS OF THE CHURCHES OF PALERMO,SICILY: FE2+‐COLOURED GLASSES FROM LIME KILNS*

Deep blue glasses coloured by octahedral Fe²⁺ cations are often reported as textbook examples of blue pigmentation. However, despite the possibility of laboratory synthesis under reducing conditions, to date there are no well‐reported occurrences of their production and use in the past. A thorough historical, ethnographic, mineralogical, and chemico‐physical investigation of the ‘smaltini di calcara’ from several baroque churches in Palermo, Sicily, has revealed that the blue enamels widely used for altar decorations in the 17th and 18th centuries are actually a unique case of ancient blue glasses pigmented by divalent iron cations in distorted octahedral coordination. This mixed‐alkali glass was accidentally produced under severely reducing conditions in the local kilns during production of lime.