Approximate Methods for Estimating Hysteretic Energy Demand on Plan-Asymmetric Buildings

The first step in a hysteretic energy-based design approach of performance-based design is the estimation of hysteretic energy demand in the structure. A nonlinear response-history analysis of the multi-degree of freedom model gives an accurate estimation, but it is not suitable for adopting in design. Two alternative methods, based on the concepts of modal pushover analysis (MPA) and 2D-MPA, are proposed in this article for uniaxial plan-asymmetric structures. Application studies show that both methods are efficient. While the 2D-MPA-based method is more accurate, the MPA-based method is more suitable for design adoption. Significant conclusions are given for prospective application of these methods.     

Applicability of Pushover Methods to the Seismic Analyses of an RC Bridge,Experimentally Tested on Three Shake Tables

The applicability of different pushover methods was analyzed on the example of a bridge, which was experimentally tested on three shake tables at the University of Nevada, Reno. The response of the bridge was quite complex. The intensity as well as the direction of the deck torsional rotations varied significantly, depending on the seismic intensity. At the low intensities, all the employed pushover methods estimated the displacements of the deck very well. In the case of strong earthquakes, the advantages of multi-mode and adaptive methods was demonstrated.     

Real-time Seismic Damage Detection of Concrete Shear Walls Using Artificial Neural Networks

Concrete shear walls are widely employed in buildings as a main resistance system against lateral loads. Early identification of seismic damage to concrete shear walls is vital for deciding post-earthquake occupancy in these structures. In this article, a method based on artificial neural networks for real-time identification of seismic damage to concrete shear walls was proposed. Inter-story drifts and plastic hinge rotation of concrete walls were used as the inputs and outputs of a MLP neural network. Modal Pushover Analysis was employed to prepare well-distributed data sets for training the neural network. The proposed method was applied to a five-story concrete shear wall building. The results from the network were compared with those obtained from Nonlinear Time History Analysis. It was observed that the trained neural network successfully detected damage to concrete shear walls and accurately estimated the severity of seismic-induced damage.     

An Analytical Study on the Seismic Vulnerability of Masonry Buildings in India

Two analytical models for unreinforced masonry (URM) buildings are proposed with the aim to simulate their seismic response and to estimate corresponding vulnerability functions. The proposed models are implemented in SAP 2000 nonlinear software to obtain capacity curve parameters for representative Indian URM buildings, based on a field survey and statistical analysis. Vulnerability functions are estimated using the obtained capacity curves. Damage Probability Matrices (DPMs) are obtained using the approximate PGA-intensity correlation relationship as per Indian seismic building code and are compared with the commonly used intensity scales and empirical damage data observed after the 2001 Bhuj earthquake.     

Analytical Seismic Assessment of a Tall Long-Span Curved Reinforced-Concrete Bridge. Part II: Structural Response

The seismic assessment of special bridges, even under the hypothesis of full knowledge of site conditions, structural characteristics, and seismic activity at their location, is not an easy and straightforward task due to the complexities and uncertainties related to the finite-element modeling approaches, structural loading scenarios, and seismic analysis methodologies. In this article, a series of nonlinear static and dynamic finite-element analyses on the Mogollon Rim Viaduct are performed with consideration of both uniform and conditionally simulated non-uniform seismic motions. The failure modes of the bridge using different numerical modeling approaches are discussed, and the degree of sensitivity of its response to the different seismic assessment strategies is evaluated. The effect of the multi-component, multi-support and multi-directional excitations of ground motions on the design and response are studied, and the pros and cons of the commonly used structural analysis methodologies of bridges are also addressed. The numerical results of the present study provide a deeper insight into the nonlinear behavior of curved reinforced-concrete bridges, and suggest practice-oriented approaches for their seismic assessment.     

A Multi-Mode Method for Estimation of Floor Response Spectra

A new simplified procedure for estimation of floor response spectra (FRS) is proposed. This methodology enriches the most common procedures using nonlinear response-history analysis to predict FRS by including a direct multi-mode technique to estimate FRS. A novel feature of the procedure is that the coupling effect is considered to establish equivalent modal systems and the FRS are developed by incorporating capacity spectrum method in conjunction with ductility-based FRS for each modal system. Both the proposed method and the traditional method are applied to three steel moment frame structures, and a reasonable accuracy is demonstrated.     

Seismic Evaluation of Tall Buildings Using a Simplified but Accurate Analysis Procedure

A simplified analysis procedure for evaluating the nonlinear seismic responses of tall reinforced concrete (RC) buildings is examined in this study. It is called the Uncoupled Modal Response History Analysis (UMRHA) procedure. It can be viewed as an extended version of the classical modal analysis procedure, where the nonlinear response of each vibration mode is first computed, and they are later on combined into the total response of the structure. The procedure requires the knowledge of the modal hysteretic behavior, which can be obtained from a cyclic modal pushover analysis. The responses of four tall buildings in Bangkok to distant large earthquakes are computed by this procedure and compared with those obtained from the Nonlinear Response History Analysis (NLRHA) procedure. These four buildings have different heights—varying from 20 to 44 stories, different configurations of floor plan, and different arrangement of RC walls. The comparison shows that the UMRHA procedure is able to accurately compute the story shears and story overturning moments, floor accelerations, and inter-story drifts of all these tall buildings. The required computational effort is also extremely low compared to that of the NLRHA procedure. Moreover, since the UMRHA procedure computes the response of each individual vibration mode, it provides more understanding and insight into the complex nonlinear seismic responses of these tall buildings.     

Simplified Seismic Sidesway Collapse Capacity-Based Evaluation and Design of Frame Buildings with Linear Viscous Dampers

This article describes a simplified procedure for estimating the seismic sidesway collapse capacity of frame building structures incorporating linear viscous dampers. The proposed procedure is based on a robust database of seismic peak displacement responses of viscously damped nonlinear single-degree-of-freedom systems for various seismic intensities and uses nonlinear static (pushover) analysis without the need for nonlinear time history dynamic analysis. The proposed procedure is assessed by comparing its collapse capacity predictions on 272 different building models with those obtained from incremental dynamic analyses. A straightforward collapse capacity-based design procedure is also introduced for structures without extreme soft story irregularities.     

Review of Different Pushover Analysis Methods Applied to Masonry Buildings and Comparison with Nonlinear Dynamic Analysis

This article presents the comparison among different nonlinear seismic analysis methods applied to masonry buildings, i.e., pushover analyses with invariant lateral force distributions, adaptive pushover analysis and nonlinear dynamic analysis. The study focuses on the influence of lateral force distribution on the results of the pushover analysis. Two simple benchmark case studies are considered for the purpose of the research, i.e., a four-wall masonry building prototype without floor rigid diaphragms and a two-wall system with a cross-vault. The comparative study offers a useful review of pushover analysis methods for masonry structures and shows advantages and possible limitations of each approach.     

Nonlinear Static Methods vs. Experimental Shaking Table Test Results

Three different Nonlinear Static Methods (NSM's), based on pushover analysis, are applied to a 3-story, 2-bay, RC frame. They are (i) the Capacity Spectrum Method (CSM), described in ATC-40, (ii) the Displacement Coefficient Method (DCM), presented in FEMA-273 and further developed in FEMA 356, and (iii) the N2 Method, implemented in the Eurocode 8. Pushover analyses are conducted with DRAIN-3DX by using four different lateral force distributions, according to the acceleration profile assumed along the height of the structure: uniform, triangular, modal-proportional, and multimodal fully adaptive. In the numerical model, RC members are modeled as fiber elements.

The numerical predictions of each method are compared to the experimental results of the shaking table tests carried out on two similar 1:3.3-scale structural models, with and without infilled masonry panels, respectively. The comparison is made in terms of maximum story displacements, interstory drifts, and shear forces. All the NSM's are found to predict with adequate accuracy the maximum seismic response of the structure, provided that the associated parameters are properly estimated. The lateral load pattern, instead, is found to little affect the accuracy of the results for the three-story model considered, even if collapse occurs with a soft story mechanism.