Importance of Degrading Behavior for Seismic Performance Evaluation of Simple Structural Systems

This study focuses on effect of degradation characteristics on seismic performance of simple structural systems. Equivalent single degree of freedom systems are used for which the structural characteristics are taken from existing reinforced concrete (RC) frame buildings. Simulation of degrading behavior is achieved by considering actual experimental data. To obtain the seismic response of degrading structural systems, two different approaches are used: inelastic spectral analysis and fragility analysis. According to the results obtained from both approaches, degrading behavior is dominant for mid-rise RC frame buildings as it significantly amplifies seismic demand. Hence, in performance-based assessment approaches, analytical modeling of such degrading structures should be carried out carefully.     

Inelastic Displacement Response of RC Systems with Cyclic Deterioration—An Energy Approach

Inelastic displacements of reinforced concrete systems are investigated by employing an energy-based approach. A hysteresis model is developed that accounts for stiffness degradation, strength deterioration and pinching. The model is calibrated by using experimental data from literature. Inelastic displacement ratios are calculated under a specific set of ground motion records with long effective durations. The results reveal the importance of deteriorating behavior under long duration excitations, especially for short and medium period structures. The last part of the study is devoted to the introduction of a simple empirical relationship for estimating the inelastic displacement demands of degrading RC structural systems.     

Probabilistic Characteristics of Seismic Ductility Demand of SDOF Systems with Bouc-Wen Hysteretic Behavior

This study investigates probabilistic characteristics of the peak ductility demand of inelastic single-degree-of-freedom systems. The hysteretic behavior of structural systems is represented by the Bouc-Wen model, which takes various hysteretic curves with degradation and pinching behavior into account, and a prediction equation of the peak ductility demand is developed. The application of the developed equation in reliability analysis of structures subject to earthquake loading is illustrated. The results indicate that the effects due to degradation and pinching behavior on the peak ductility demand as well as the reliability of structures can be significant, especially for stiff structures.     

Effect of Hysteresis Type on Drift Limit for Global Collapse of Moment Frame Structures Under Seismic Loads

Seismic analyses of 3-, 9-, and 20-story moment resisting frame (MRF) buildings with 5 hysteresis models were conducted. The objectives of the study were to study the effect of the hysteresis type on the global collapse drift limit, seismic demand, and capacity/demand ratio for MRF structures under seismic loads. The results show that strength degradation significantly decreases the global drift limit and the safety of the structure, whereas, the existence of stiffness degradation or pinching has small effect. The results suggest that the global drift limit for a building is not likely to be the collapse limit state (CLS) which will most likely be governed by local collapse.     

Estimation of the Displacement of Viscously Damped Pinching Hysteretic Structures Subjected to Near-fault Ground Motions

To fulfill a displacement-based design or response prediction for nonlinear structures, the concept of equivalent linearization is usually applied, and the key issue is to derive the equivalent parameters considering the characteristics of hysteretic model, ductility level, and input ground motions. Pinching hysteretic structures subjected to dynamic loading exhibit hysteresis with degraded stiffness and strength and thus reduced energy dissipation. In case of excitation of near-fault earthquake ground motions, the energy dissipation is further limited due to the short duration of vibration. In order to improve the energy dissipation capability, viscous-type dampers have been advantageously incorporated into these types of structures. Against the viscously damped pinching hysteretic structure under the excitation of near-fault ground motions, this study aims to develop a seismic response estimation method using an equivalent linearization technique. The energy dissipation of various hysteretic cycles, including stationary hysteretic cycle, amplitude expansion cycle, and amplitude reduction cycle, is investigated, and empirical formulas for the equivalent damping ratio is proposed. A damping modification factor that accounts for the near-fault effect is introduced and expanded to ensure its applicability to structures with damping ratios less than 5%. An approach for estimating the maximum displacement of a viscously damped pinching hysteretic structure, in which the pinching hysteretic effect of a structure and the near-fault effect of ground motions are considered, is developed. A time history analysis of an extensive range of structural parameters is performed. The results confirm that the proposed approach can be applied to estimate the maximum displacement of a viscously damped pinching hysteretic structure that is subjected to near-fault ground motions.