Influence of Openings,With and Without Confinement,on Cyclic Response of Infilled R-C Frames — An Experimental Study

This article presents the experimental results of a study on reinforced-concrete frames infilled with masonry with openings. The frames were designed according to current European codes. They were built in a scale 1:2.5 and infilled with masonry walls. Mid-size window and door openings were located centrically and eccentrically and were executed with and without tie-columns around them. Presence of masonry infill, although not accounted for in design, improved the system behavior (increase in stiffness, strength and energy dissipation capacity) at drift levels of up to 1%. During the test, openings did not influence the initial stiffness and strength at low drift levels. Their presence became noticeable at higher drift levels, when they lowered the energy dissipation capacity of the system. The infill wall had a multiple failure mechanism that depended on the opening height and position. Tie-columns controlled the failure type, independent of the opening type, prevented out-of-plane failure of the infill, and increased the system's ductility. Negative effects of the infill on the frame were not observed. The infill's contribution could be deemed positive as it enhanced the overall Structural Performance Level. Analytical expressions commonly used for infilled frames underestimate the infill's contribution to strength and stiffness and overestimate the contribution of the bare frame.     

Identification of Suitable Limit States from Nonlinear Dynamic Analyses of Masonry Structures

Performance-based earthquake engineering, developed over the last decades for the design and assessment of other structures, can also be applied for masonry structures if the particularities of masonry are incorporated into the procedure. According to this methodology, structural performance can be assessed according to damage states which are identified through displacement/damage indicators. While various methods for the identification of limit states from the results of nonlinear static analyses exist, the identification of damage states from the results of nonlinear dynamic analyses is still uncertain. This article investigates a number of criteria allowing to identify the attainment of significant limit states from the results of time history analyses, in terms of appropriately identified response quantities. These criteria are applied to five building prototypes and their results are compared. A comparison with the limit states derived from nonlinear static analyses is also made.     

中国古代砖石建筑及其保护修复概述

砖石建筑是指利用砖石材料以一定的结构形式砌筑的建筑物或构筑物,这是中国传统建筑营造的一大类型,在中国建筑史上具有悠久历史和重要地位。我国现存砖石建筑分布地域广、数量多,本文从保护角度出发,介绍了砖石建筑历史及类型,并结合具体案例,对砖石建筑的保护与修复过程中的病害类型、原因、治理方法等进行了概述。     

An Analytical Study on the Seismic Vulnerability of Masonry Buildings in India

Two analytical models for unreinforced masonry (URM) buildings are proposed with the aim to simulate their seismic response and to estimate corresponding vulnerability functions. The proposed models are implemented in SAP 2000 nonlinear software to obtain capacity curve parameters for representative Indian URM buildings, based on a field survey and statistical analysis. Vulnerability functions are estimated using the obtained capacity curves. Damage Probability Matrices (DPMs) are obtained using the approximate PGA-intensity correlation relationship as per Indian seismic building code and are compared with the commonly used intensity scales and empirical damage data observed after the 2001 Bhuj earthquake.     

Comparison of Numerical and Experimental Seismic Responses of FREI-Supported Un-reinforced Brick Masonry Model Building

Comparative study of numerically and experimentally obtained seismic responses of un-reinforced masonry building supported on in-house designed un-bonded fibre reinforced elastomeric isolator (U-FREI) are presented in this article. The effectiveness of U-FREI is established very clearly in terms of controlled dynamic response of the model building. Experimental studies are carried out on a shake table with elaborate instrumentations for measurement of acceleration and displacements at different floor levels. Numerical study of the model building supported on U-FREI is carried out to compare the results with experimental investigation. Multi-linear pivot hysteretic plasticity model is used to simulate the behavior of FREI, while plate elements are used for brick-masonry walls. Experimentally obtained force-displacement curves of FREI are used for defining the properties of multi-linear model representing FREI. The dynamic responses obtained from the numerical studies are compared with those from experimental investigations. This study indicates that the seismic responses of building supported on U-FREI can be numerically evaluated with quite reasonable accuracy. A good numerical model can be judiciously used at the preliminary design stage, followed by actual testing and construction of the base isolated building.     

A DAMAGE MODEL FOR THE ANALYSIS OF THE SEISMIC RESPONSE OF MONUMENTAL BUILDINGS

In this paper the Author proposes a damage model for the analysis of masonry plates and shells, which is based on an improvement of a previous constitutive model. The modifications introduced, connected to the head joint damage, allow us to study the influence of masonry texture on the damage modes once the mechanical characteristics of the elements constituting the masonry and the results of tests on simple assemblages are known. Having a nonlinear constitutive model is certainly one of the basic elements for understanding the damage mechanisms in masonry buildings. If, in fact, an elastic-linear constitutive model may be used under normal loading conditions, in critical situations it is necessary to model the damage and the dissipation mechanisms that occur between the elements, stone (brick) and mortar, in correlation with their characteristics and kind of masonry. To validate the model a comparison is made between the numerical and experimental results, in the case of tests available in the literature in masonry panels subjected to out-of plane loading and in a real structure through the observation of the damage in Umbria (Italy) surveyed after the 1997 earthquake.     

Effects of Geometrical Features on the Seismic Response of Historical Masonry Towers

ABSTRACT

Historical masonry structures are often located in earthquake-prone regions and the majority of them are considered to be seismically vulnerable and unsafe. Historical masonry towers are slender structures that exhibit unique architectural features and may present many inadequacies in terms of seismic performance. The seismic protection of such typologies of structures and the design of effective retrofitting interventions require a deep understanding of their behavior under horizontal loads. This paper presents the results of the seismic performance evaluation of historical masonry towers located in Northern Italy. A large set of case studies is considered, comprising a significant number of towers with high slenderness and marked inclination. First, a preliminary assessment of the dynamic behavior of the different towers is carried out through eigenfrequency analyses. Then, non-linear dynamic simulations are performed using a real accelerogram with different peak ground accelerations. A damage plasticity material model, exhibiting softening in both tension and compression, is adopted for masonry. The huge amount of results obtained from the non-linear dynamic simulations allows a comparative analysis of the towers to be performed in order to assess their seismic vulnerability and to show the dependence of their structural behavior on some geometrical characteristics, such as slenderness, inclination, and presence of openings and belfry. The evaluation of different response parameters and the examination of tensile damage distributions show the high vulnerability of historical masonry towers under horizontal loads, mainly in the presence of marked inclination and high slenderness. Some general trends of the seismic behavior of the towers are deduced as a function of the main typological features.     

Contact Dynamics of Masonry Block Structures Using Mathematical Programming

A simple variational formulation for contact dynamics is adopted to investigate the dynamic behavior of planar masonry block structures subjected to seismic events. The numerical model is a two-dimensional assemblage of rigid blocks interacting at potential contact points located at the vertices of the interfaces. A no-tension and associative frictional behavior with infinite compressive strength is considered for joints. The dynamic contact problem is formulated as a quadratic programming problem (QP) and an iterative procedure is implemented for time integration. Applications to analytical and numerical case studies are presented for validation. Comparisons with the experimental results of a masonry wall under free rocking motion and of a small scale panel with opening subjected to in-plane loads are also carried out to evaluate the accuracy and the computational efficiency of the formulation adopted.     

Simple Homogenization-Topology Optimization Approach for the Pushover Analysis of Masonry Walls

ABSTRACT

A topology optimized rigid triangular FE macro-model with non-linear homogenized interfaces for the pushover analysis of in plane loaded masonry is presented. The shape of the mesh and the position of the interfaces is evaluated through a topology optimization approach that detects the main compressive stress fluxes in the structure. Different values of the horizontal action are considered to derive an adaptive mesh or an optimal discretization that is suitable for multiple loads. Masonry properties are calibrated by means of a homogenization approach in the nonlinear range. To tackle elastic and inelastic deformations, interfaces are assumed to behave as elasto-plastic with softening in both tension and compression, with orthotropic behavior. The two-step procedure competes favorably with classic equivalent frame approaches because it does not require a-priori assumptions on the mesh and on the length of the rigid offsets. An example of technical relevance is discussed, relying into a multi-story masonry wall loaded up to failure.     

Displacement-Based Design of an Energy Dissipating System for Seismic Upgrading of Existing Masonry Structures

A displacement-based method for the design of an energy dissipating system is proposed in this article. The device, which is composed of added concrete walls equipped with hysteretic Added Damping and Stiffness (ADAS) dampers, is aimed at upgrading the seismic behavior of existing masonry structures. The design method is based upon a simplified model of the overall structure-dissipating system. The proposed displacement-based design procedure was tested by means of inelastic response-time history analyses considering different masonry structures. The results of the analyses were compared with the seismic behavior expected from the design.