Seismic Vulnerability Assessment of an Infilled Reinforced Concrete Frame Structure Designed for Gravity Loads

In the last decades, particular attention has been paid to the seismic vulnerability of existing reinforced concrete buildings designed for gravity loads only. Such buildings, designed before the introduction of capacity design in modern seismic codes, are very common, particularly in seismic prone countries of the Mediterranean area. Due to poor detailing and lacking of capacity design principles, high vulnerability has been highlighted in several past studies. In this article, inadequate seismic response and peculiar damage pattern are investigated by means of shake table tests performed on a 1:2 scaled 3-story infilled prototype. Particular attention is given to the role of beam-column joints and frame-panel interaction. The effectiveness of the EC8-based assessment approach is then evaluated; both linear and nonlinear numerical models, with different levels of sophistication, have been implemented in order to explore their behavioral aspects.     

Full-Scale Shaking Table Tests on a Substandard RC Building Repaired and Strengthened with Post-Tensioned Metal Straps

The effectiveness of a novel Post-Tensioned Metal Strapping (PTMS) technique at enhancing the seismic behavior of a substandard RC building was investigated through full-scale, shake-table tests during the EU-funded project BANDIT. The building had inadequate reinforcement detailing in columns and joints to replicate old construction practices. After the bare building was initially damaged significantly, it was repaired and strengthened with PTMS to perform additional seismic tests. The PTMS technique improved considerably the seismic performance of the tested building. While the bare building experienced critical damage at an earthquake of PGA = 0.15 g, the PTMS-strengthened building sustained a PGA = 0.35 g earthquake without compromising stability.     

Cyclic Modeling of Bolted Beam-to-Column Connections: Component Approach

The work is aimed at the prediction of the cyclic response of bolted beam-to-column joints starting from the knowledge of their geometrical and mechanical properties. To this scope a mechanical model is developed within the framework of the component approach already codified by Eurocode 3 for monotonic loadings.

Accuracy of the developed mechanical model is investigated by means of the comparison between numerical and experimental results with reference to an experimental program carried out at Salerno University. The obtained results are encouraging about the possibility of extending the component approach to the prediction of the cyclic response of bolted connections.     

Experimental Analysis of Bolted Steel Beam-to-Column Connections: Component Identification

In this paper, the results of an experimental program dealing with the ultimate behavior of bolted beam-to-column connections under cyclic actions are presented. The design criteria adopted for tested specimens are discussed in detail, aiming to point out how the ultimate behavior can be governed by properly strengthening the components for which yielding has to be prevented. To this scope, the component approach is adopted as a design tool for component hierarchy criteria. The aim of the paper is the investigation of the actual possibility of extending the component approach to the prediction of the cyclic response of beam-to-column joints. To this scope, the attention has been focused on the possibility to evaluate the overall energy dissipation capacity starting from the energy dissipation of the single joint components, provided that they are properly identified and their cyclic behavior is properly measured.     

Experimental Investigation of Exterior Unreinforced Beam-Column Joints with Plain and Deformed Bars

Experimental tests on four full-scale exterior unreinforced reinforced concrete (RC) beam-column joints, representative of the existing non-conforming RC frame buildings, are carried out. The specimens have different longitudinal reinforcements (plain or deformed) and they are designed in order to be representative of two typical design practices (for gravity loads only or according to an obsolete seismic code). Different failure modes are observed, namely joint failure with or without beam yielding. The local response of the joint panel is analyzed. The different joint deformation mechanisms and their contribution to the deformability and to the energy dissipation capacity of the sub-assemblages are evaluated.     

Experimental Investigation on the Seismic Performance of Beam-Column Joints Reinforced with GFRP Bars

Glass fiber-reinforced polymer (GFRP) reinforcing bars were used recently as main reinforcement for concrete structures. The noncorrodible GFRP material exhibits linear-elastic stress-strain characteristics up to failure with relatively low modulus of elasticity compared to steel. This raises concerns on GFRP performance in structures where energy dissipation, through plastic behavior, is required. The objective of this research project is to assess the seismic behavior of concrete beam-column joints reinforced with GFRP bars and stirrups. Two full-scale exterior T-shaped beam-column joint prototypes are constructed and tested under simulated seismic load conditions. One prototype is totally reinforced with GFRP bars and stirrups, while the other one is reinforced with steel. The experimental results showed that the GFRP reinforced joint can sustain a 4.0% drift ratio and can recover its deformation without any significant residual strains. This indicates the feasibility of using GFRP bars and stirrups as reinforcement in the beam-column joints subjected to seismic-type loading.     

Beam-Column Joint Model for Nonlinear Analysis of Non-Seismically Detailed Reinforced Concrete Frame

An efficient and simplified plane beam-column joint model that can describe the strength deterioration, stiffness degradation, and pinching effect was developed for the nonlinear analysis of non-seismically detailed reinforced concrete frames. The proposed beam-column joint model is a super-element consisting of eight spring components and one panel zone component, representing the bond-slip mechanism of the longitudinal reinforcement and the shear deformation mechanism of the joint concrete core region, respectively. In order to represent the dynamic response at the system level, the elastic constitutive law is applied to the eight connector springs, while the Bouc-Wen-Baber-Noori (BWBN) model is adopted to describe the hysteretic behavior of the panel zone component. For the implementation of the finite element analysis, the algorithmically consistent tangent of the BWBN model is derived as a uni-axial constitutive model, while the initial stiffness of the panel zone component is determined by the concrete compression strut assumption. The accuracy and efficiency of the proposed beam-column joint model were calibrated at both the component and structural levels by comparing the simulated results with the experimental data for non-seismically detailed joint sub-assemblages and a reinforced concrete plane frame.     

Seismic Fragility Evaluation of Lightly Reinforced Concrete Beam-Column Joints

Fragility functions play an essential role in evaluating the seismic vulnerability of structures. To establish the seismic fragility functions of lightly Reinforced Concrete (RC) beam-column joints, the Park-Ang Damage model has been amended to quantify the damage states and the modified Bouc-Wen-Baber-Noori model has been employed and implemented in ABAQUS to predict the structural hysteresis behavior. Following successful calibration of the numerical results of a RC test frame from literature, the proposed model has been utilized to assess the seismic fragility curves of low to mid-rise RC frames in Singapore for 30 scaled ground motions using incremental dynamic analysis approach.     

Experimental Study and Numerical Model Calibration for Earthquake-Induced Collapse of RC Frames with Emphasis on Key Columns,Joints, and the Overall Structure

A thorough investigation of earthquake-induced collapse of reinforced concrete frames is presented. The inherent correlation between the nonlinear behavior of key components and the collapse mechanism of overall frame is examined through concurrent collapse tests of both frame and key components. Important issues in the component models are investigated through calibration against experiments, leading to a comprehensive structural system model. Both test and simulation indicate that the seismic performance are predominately governed by the key columns, whereas the energy dissipation capacity is somewhat affected by the joints. This study offers systematic experimental data and numerical models for future collapse assessments.     

Effects of Base and Lift Joints on the Dynamic Response of Concrete Gravity Dams to Pulse-Like Excitations

Near-fault earthquakes with forward-directivity effects produce pulse-like excitations. This article studies the dynamic response of monolithic and cracked sections of gravity dam under symmetric and anti-symmetric pulse-like excitations. The pulses are generated by the modified Gabor Wavelet transform. Two main characteristics of the pulses are pulse period and amplitude. The prescribed cracks are located along the base and two distinct lift joints through the dam body. The dam is modeled along with its reservoir using finite element method. The effects of base and lift joints, pulses shape, period, and amplitude, and reservoir height on the dam dynamic response are studied.