The Numerical Study of Base-Isolated Buildings Under Near-Field and Far-Field Earthquakes

The behavior of base-isolated building frame is investigated with the help of a numerical study for far-field and near-field earthquakes with directivity and fling-step effects. Both design-level and extreme-level earthquakes are considered. Selected response parameters are peak floor displacement, acceleration, base shear, and isolator displacement. Inelastic behavior of base-isolated structure during the earthquake is investigated performing nonlinear time history analysis of a ten-story building frame. This study shows that base isolation is not effective for near-field earthquakes. Even for design-level earthquake, the frame gets significantly into inelastic range for earthquakes with fling-step effect.     

Assessment of Effects of Reductions of Lateral Stiffness along Height on Buildings Modeled as Elastic Cantilever Shear Beams

A simplified model useful for assessing economic losses due to moderate seismicity events in urban areas has been developed by studying the behavior of buildings before yielding their structural system, allowing for nonuniform stiffness along their height. In particular, buildings are modeled as cantilever shear beams with uniform mass and parabolic reduction of lateral stiffness. This particular stiffness distribution is relevant, as it could be expected to occur in buildings where earthquake action is a critical structural design criterion. The equation of motion governing the dynamic behavior of the proposed model is solved analytically, finding mode shapes in terms of first and second zero-order Legendre functions. The solution is verified by comparing it with results obtained from fine mesh finite element models. The effect of reducing the lateral stiffness is then studied in the first five modes of vibration. Results include modal periods, mode shapes, modal participation factors, and derivatives of mode shapes. In general, it is found that effects of reduction of lateral stiffness in mode shapes are moderate when the lateral stiffness in the free end is smaller than about seventy percent of the lateral stiffness at the fixed end, but become significant for larger reductions. Effects are particularly important for the derivative of the mode shapes, which could play a significant role in estimating interstory drift demands in buildings. Model usefulness is showcased by analyzing a test case where both acceleration and drift demands are assessed by considering uniform beams and beams with parabolic stiffness variation, finding notable improvements by considering the latter.     

Inelastic Displacement Ratios for Nonstructural Components Subjected to Floor Accelerations

This paper describes a study on the characterization of the Inelastic Displacement Ratios (IDRs) of inelastic acceleration-sensitive nonstructural components subjected to floor accelerations obtained from the linear analysis of multistory building structures under far-field ground accelerations. Several building models having different structural systems and a number of stories were considered. IDRs were obtained from the displacement response of elastic and inelastic single-degree-of-freedom systems subjected to floor accelerations. Similarities and differences between floor acceleration IDRs and ground acceleration IDRs were identified, and efforts were made to explain the differences. Finally, a predicting equation for floor acceleration IDRs is proposed and validated.     

Smart Lead Rubber Bearings Equipped with Ferrous Shape Memory Alloy Wires for Seismically Isolating Highway Bridges

Shape memory alloys (SMA) can substantially improve the damping capacity and re-centering capability of elastomeric isolators. The objective of this study is to assess the seismic performance of smart lead rubber bearings (LRBs) equipped with double cross ferrous SMA wires. Hysteretic shear response of SMA wire-based LRB is determined using finite element method. The seismic response of a multispan continuous steel girder bridge isolated by SMA-LRB is evaluated. Hybrid SMA-LRB bearing exhibits a significantly lower shear strain demand (up to 46% reduction) and a higher energy dissipation capacity (up to 31% increase) compared to the LRB.     

Development of Collaborative Structure Analysis (CSA) System and Its Application to Investigate Effects of Soil-Structure Interaction

In this article, a collaborative structure analysis (CSA) system is developed for integrating different finite-element simulation programs. In this system, a simulated structure is divided into multiple substructures, and the interaction between the substructures is considered. Interfaces for the commercial finite-element program ABAQUS and for an open-source framework for structure analysis, OpenSees, are developed to achieve CSA integration. The CSA system is applied to analysis of a soil-structure interaction (SSI) problem, and the effects of SSI are investigated, and the efficiency and accuracy of the system are demonstrated.     

Effects of Different Record Selection Methods on the Transverse Seismic Response of a Bridge in South Western British Columbia

The seismic response of a continuous 4-span bridge designed according to the current Canadian seismic provisions is investigated using Incremental Dynamic Analysis (IDA). Different earthquake types, including shallow crustal events, interface Cascadia subduction, and deep inslab subduction are considered. The median collapse capacities calculated using different record selection methods including Conditional Mean Spectrum (CMS)-based, Uniform Hazard Spectrum (UHS)-based, and epsilon-based methods are compared. The use of the epsilon-based method generally resulted in the highest collapse capacity predictions, but the CMS-based method was less sensitive to the number of records considered in the IDA.     

A New Proposed Passive Mega-Sub Controlled Structure and Response Control

It is still a serious challenge for structural engineers to effectively reduce the seismic responses of tall and super tall buildings to further improve these structural safeties. In order to solve this problem, in this article a new kind of structural configuration, named passive mega-sub controlled structure (PMSCS), is presented, which is constructed by applying the structural control principle into structural configuration itself, to form a new structure with obvious response self-control ability, instead of employing the conventional method. In the analysis of PMSCS the equations of motion of the seismically excited system are developed, based on a realistic analytical model of the complete mega-structural system. Expressions of the displacement and acceleration response of the structure, resulting from simulated earthquake ground motions represented by stationary and nonstationary random processes, are derived. These responses are then determined for both the PMSCS and its conventional mega-sub structure (MSS) counterpart, whose configuration was modeled after the traditional mega-frame that was used in the construction of the Tokyo City Hall. A parametric study of the structural characteristics that influence the response control effectiveness of the PMSCS is presented and discussed. The region over which these structural characteristics yield the optimum seismic response control of the PMSCS is identified and serves as a very useful design tool for practitioners. The study illustrates that the proposed PMSCS offers an effective means of controlling the seismic displacement and acceleration response of tall/super-tall mega-systems. It also overcomes shortcomings exhibited in earlier proposed mega-sub controlled structural configurations.     

Seismic Fragility Evaluation of RC Frame Structures Retrofitted with Controlled Concrete Rocking Column and Damping Technique

Acceleration response of simple yielding structure is proportional to its own weight, but it is limited by yield strength. Thus, using rocking columns that reduces global yield strength, a limited acceleration is achieved. However, the displacement becomes large due to lower strength and higher inelasticity, but it can be controlled by adding damping. Performing fragility analyses, the seismic response of R/C frame structures with rocking columns and viscous dampers is investigated. Near field MCEER ground motions are considered. The analyses show that the story accelerations are reduced by using rocking columns, while the story displacements are controlled by using viscous dampers.     

Numerical Evaluation of Topographic Effects at the Nicastro Ridge in Southern Italy

Numerical site response analyses were carried out on the Nicastro ridge in Southern Italy in order to investigate topographic effects. First, the analyses were carried out on a simplified model by employing simple artificial signals, in order to get preliminary physical insights into the two-dimensional phenomena involved. Then, numerical analyses were carried out on a more realistic heterogeneous subsoil model developed on the basis of geotechnical and geophysical investigations. Real accelerograms were selected for these analyses. Particular attention was devoted to separating topographic from stratigraphic amplification. Finally, the topographic amplification factors were compared with literature data and Eurocode 8 recommendations.     

A Modified Capacity Spectrum Method with Direct Calculation of Seismic Intensity of Points on Capacity Curve

A direct methodology for solving the seismic intensity of each point on the capacity curve is proposed. By utilizing the procedure, a continuous curve between the structural response and the seismic intensity, the structural response function, can be easily generated. Unlike previous procedures that search for the performance point of a determined seismic intensity, the proposed methodology easily draws the full curve without iterations. The procedure is applicable to both a smooth design spectrum and an actual response spectrum. Examples indicate the methodology is accurate and fast, and convenient to be combined with existing procedures, such as Modal Pushover Analysis.