Assessment of Effects of Reductions of Lateral Stiffness along Height on Buildings Modeled as Elastic Cantilever Shear Beams

A simplified model useful for assessing economic losses due to moderate seismicity events in urban areas has been developed by studying the behavior of buildings before yielding their structural system, allowing for nonuniform stiffness along their height. In particular, buildings are modeled as cantilever shear beams with uniform mass and parabolic reduction of lateral stiffness. This particular stiffness distribution is relevant, as it could be expected to occur in buildings where earthquake action is a critical structural design criterion. The equation of motion governing the dynamic behavior of the proposed model is solved analytically, finding mode shapes in terms of first and second zero-order Legendre functions. The solution is verified by comparing it with results obtained from fine mesh finite element models. The effect of reducing the lateral stiffness is then studied in the first five modes of vibration. Results include modal periods, mode shapes, modal participation factors, and derivatives of mode shapes. In general, it is found that effects of reduction of lateral stiffness in mode shapes are moderate when the lateral stiffness in the free end is smaller than about seventy percent of the lateral stiffness at the fixed end, but become significant for larger reductions. Effects are particularly important for the derivative of the mode shapes, which could play a significant role in estimating interstory drift demands in buildings. Model usefulness is showcased by analyzing a test case where both acceleration and drift demands are assessed by considering uniform beams and beams with parabolic stiffness variation, finding notable improvements by considering the latter.     

Self-Centering Behavior of Unbonded,Post-Tensioned Precast Concrete Shear Walls

Self-centering ability of unbonded post-tensioned precast concrete shear walls has been attributed to the presence of post-tensioning force. However, the experimental results presented in this paper indicate that the post-tensioning force may completely die out during cyclic loading while the walls are able to retain their superior self-centering characteristic. Moreover, the analytical study presented in this article indicates that with proper configuration of end-anchorages for post-tensioned tendons, self-centering of post-tensioned walls can be achieved even when the post-tensioning force vanishes. This study also investigates the effects of tendon layout, tendon end-anchorage configuration, and external vertical load on the self-centering ability of unbonded precast concrete shear walls subjected to earthquake loading.     

Behavior Factor for Performance-Based Seismic Design of Plane Steel Moment Resisting Frames

Simplified expressions to estimate the behavior factor of plane steel moment resisting frames are proposed, based on statistical analysis of the results of thousands of nonlinear dynamic analyses. The influence on this factor of specific structural parameters, such as the number of stories, the number of bays, and the capacity design factor of a steel frame, is studied in detail. The proposed factor describes the seismic strength requirements in order to restrict maximum storey ductility to a predefined value. Interrelation studies between maximum storey ductility and the Park-Ang damage index are also provided for the damage-based interpretation of the performance levels under consideration. Realistic design examples serve to demonstrate the ability of the proposed factor to convert conventional force-based design to a direct performance-based seismic design procedure.     

Full-Scale Shaking Table Tests on a Substandard RC Building Repaired and Strengthened with Post-Tensioned Metal Straps

The effectiveness of a novel Post-Tensioned Metal Strapping (PTMS) technique at enhancing the seismic behavior of a substandard RC building was investigated through full-scale, shake-table tests during the EU-funded project BANDIT. The building had inadequate reinforcement detailing in columns and joints to replicate old construction practices. After the bare building was initially damaged significantly, it was repaired and strengthened with PTMS to perform additional seismic tests. The PTMS technique improved considerably the seismic performance of the tested building. While the bare building experienced critical damage at an earthquake of PGA = 0.15 g, the PTMS-strengthened building sustained a PGA = 0.35 g earthquake without compromising stability.     

Pseudo-Dynamic Testing and Analytical Modeling of AAC Infilled RC Frames

Two concrete frames were tested by the PsD procedure. One frame was bare and the other was infilled with AAC blocks in the middle bay. The objective was to determine the effect of AAC infills on the seismic performance of reinforced concrete frames and developing an AAC strut model. Based on the test results, it was found that AAC infill panels did not modify the deformation response of the RC test frame significantly; however, shear in diagonal strut must be considered in boundary column design. A shear design procedure is proposed for the boundary columns in infilled frames. The drift limits of AAC infill panels measured during the tests were 0.005, 0.008, and 0.014 during diagonal cracking, corner crushing, and severe damage states, respectively.     

More is more: Scaling political ecology within limits to growth

This piece responds to the article Is less more… or is more less? Scaling the political ecology of the future, where Paul Robbins (2019) discusses degrowth and modernism as two competing political imaginaries with regard to the growth-technology-environment nexus. Arguing from the perspective of ecological economics, I engage with the literature on political ecology to discuss the notions of limits to growth, Malthusianism, austerity and scarcity, as well as the role of technology as both environmental problem and solution. The paper exposes key divergences between different traditions in political ecology with regard to technological and economic scale. First, against the argument that limits to growth is a mere social construct, I call attention to research on ecological thresholds and to the perils of epistemic relativisms in a post-truth era. Second, against the idea that limits represent an elitist discourse, I call attention to long-standing traditions in emancipatory politics that defend limits in the name of justice. Third, against the thesis that more is less, I refer to mounting empirical evidence indicating that more is more (growth brings more environmental destruction, not less). I contend that political ecology can have much to gain from engaging with the political utopia of degrowth, but far less so from the technological utopia of modernism, which –I argue– reinforces status quo and offers false solutions to the environmental challenges of our time. Emancipation, I claim, is not about bringing more to more, but about bringing enough to everyone.     

Effect of Infill Walls on the Drift Behavior of Reinforced Concrete Frames Subjected to Lateral-Load Reversals

Four-story, single-bay, 1/5 scaled reinforced concrete frames were tested with and without infill walls. Frames were subjected to pseudo-static cyclic loading. In addition, impact hammer measurements were made to obtain the natural frequencies and modal shapes at certain drift levels. It was observed that infill walls cause major changes on both the stiffness and the drift behavior of the frames. Effect of observed changes can be either advantageous or disadvantageous depending on failure mode. Results showed that the distribution of drift that is based on the mode shapes has higher local concentrations than the distribution observed under forced static conditions.     

Acheulean variation and selection: does handaxe symmetry fit neutral expectations?

It has been suggested that the property of symmetry observed in Acheulean handaxes was selected for functional, adaptive or social and aesthetic reasons. However, selectionist accounts of variation may be contrasted with the approach taken by population geneticists to molecular variation. Population geneticists always first assume a neutral pattern of variation for molecular data, and only look to non-neutral (e.g., selective) scenarios for pattern and variation in the face of strong evidence against this null model of neutral expectation. Here, using a combination of cultural transmission theory, morphometrics, and the principles of population genetics, (null) neutral expectations for Acheulean handaxe symmetry are tested. The results of the analyses are inconsistent with a null hypothesis of neutral expectation for patterns of handaxe symmetry variation. Rather, the results imply that the property of symmetry in Acheulean handaxes was subject to selection for functional, adaptive or social reasons.     

Influence of Time Step of Ground Motions on Site Effect and Structural Response Analyses for Long-Duration Earthquakes

Long-duration ground motions may be down-sampled to speed up the computational process. However, using ground motions with large time step (Δt) would inevitably bring in numerical errors. The influence of Δt on the site effect and structural response analyses was quantitatively examined in this study. The results show that the nonlinear site response method is more sensitive to a change of Δt than the equivalent-linear method. For the structural analysis, the impact of Δt is highly dependent on the magnitude of damage parameters. Thus, using input motions with Δt as 0.005 s is recommended for structures subjected to strong shakings.     

Seismic Behavior of Reinforced Concrete Interior Wide-Beam Column Joints

In this article, experimental and finite element (FE) numerical investigations on interior wide-beam column joints are presented. The experimental research consisting of three full-scale interior wide-beam column specimens was carried out at Nanyang Technological University, Singapore to study the seismic behavior. Details of the test results are discussed to understand the specimens' seismic performance in terms of general behavior, hysteresis loops response, and strain profiles of longitudinal reinforcement. In the FE numerical study, the three-dimensional (3D) model developed is validated by comparing the analysis results with the experimental test results, which has shown a good agreement. A parametric study is performed to elucidate more information and to understand the influence of critical parameters affecting the joint behavior such as column axial load, beam anchorage ratio, and wide beam participation.