基于三维扫描模型的兵马俑足踝有限元分析

利用三维扫描技术获取兵马俑残片的三维点云数据,结合Geomagic Studio和Hypermesh建立高精度的兵马俑足踝残片三维实体网格模型。通过基于ABAQUS的重力作用下的有限元分析,研究足踝部分的Von Mises应力和变形特征,以确定足踝处的受力薄弱部位。为进一步探究模型各残片的最佳点云简化比例,采用点云简化模型进行相同工况的有限元分析,以验证点云简化的可靠性。结果表明:结构在重力作用下可保持安全稳定的状态,相对薄弱部位位于左腿足踝处;对于大部分残片,其最佳简化比例在60%～70%,简化后可有效缩短模型实体化处理时间;采用简化模型得到的有限元结果,其最大Mises应力相比于原始模型的误差小于15%,且应力云图和变形图形状接近,模型简化具有可靠性。     

多种科技方法在古月桥勘察修缮设计中的应用

建于南宋嘉定六年(公元1213年),位于浙江省义乌市的古月桥是折边拱桥这种桥梁发展过渡形式中不可多见的典型实证,具有极高的历史、科学、艺术、文化和社会价值。为了明确古月桥目前的状态,分析其主要威胁及病害原因,判断结构稳定性,进而制定有针对性的修缮方案,采用多种科技方法对古月桥进行了勘察和综合判断。面对桥身残破的现状,工作组采取了三维激光扫描、微观实验、结构分析等多种科技方法综合勘察,不仅较为清晰的地了解了古月桥的病害威胁,也分析了其背后致因及相互之间的联系;最终对古月桥稳定性及保存状况做出了综合判断。上述多种方法的应用,不仅相互印证了勘察结论,也为后续保护工作提供了重要的依据。     

Quantifying artefacts over time: Interval estimation of a Poisson distribution using the Jeffreys prior

This paper presents a new method for estimating the amount of an artefact class in use at a given moment in the past from a random assemblage of archaeological finds. The method is based on the use of simulation, since an analytical solution is computationally impractical. Estimating the number of artefacts in use at any time t is shown to follow a Poisson distribution, which allows for credible intervals to be established using the Jeffreys prior. This estimator works from minimal assumptions about the dating and duration of finds, as well as the intensity of collection, and is applied to coinage from four Roman‐period sites excavated by the Roman Peasant Project (2009–14). The result provides an estimation of the abundance of material according to an interval of certainty.     

Hybrid finite element–finite volume discretization of complex geologic structures and a new simulation workflow demonstrated on fractured rocks

The generation of computational meshes of complex geological objects is a challenge: their shape needs to be retained, resolution has to adapt to local detail, and variations of material properties in the objects have to be represented. Also mesh refinement and adaptation must be sufficient to resolve variations in the computed variable(s). Here, we present an unstructured hybrid finite element, node‐centred finite‐volume discretization suitable for solving fluid flow, reactive transport, and mechanical partial differential equations on a complex geometry with inhomogeneous material domains. We show that resulting meshes accurately capture free‐form material interfaces as defined by non‐uniform rational B‐spline curves and surfaces. The mesh discretization error is analysed for the elliptic pressure equation and an error metric is introduced to guide mesh refinement. Finite elements and finite volumes are represented in parametric space and integrations are conducted numerically. Subsequently, integral properties are mapped to physical space using Jacobian transformations. This method even retains its validity when the mesh is deformed. The resulting generic formulation is demonstrated for a transport calculation performed on a complex discrete fracture model.     

The Origin and Archaeometallurgy of a Mixed Sulphide Ore for Copper Production on the Island of Kea,Aegean Sea,Greece

At the hill of Agios Symeon, on the island of Kea, Aegean Sea, Greece, ancient metallurgical slags with a high Pb–Zn–Cu content have been found. Thermodynamic simulations have been carried out, using the FactSage? thermodynamic database computing system, with a view to understanding the ancient metallurgical processes that produced the observed slag compositions and morphologies. The simulations demonstrate that the slag samples resulted from Cu‐making processes. It would thus appear that mixed ores were used, containing Cu₂S–FeS–PbS with significant amounts of sphalerite (ZnS) as impurity. The roasted ores were reduced at relatively high oxygen potentials at ～1125°C to form Cu containing low levels of Pb, Fe and Zn.     

Modeling the prehistoric arrival of the sweet potato in Polynesia

The sweet potato is a plant native to the Americas, and its pre-historic presence in Polynesia is a long-standing anthropological problem. Here we use computer-driven drift simulations to model the trajectories of vessels and seed pods departing from a segment of coast between Mexico and Chile. The experiments demonstrate that accidental drift voyages could have been the mechanism responsible for the pre-historic introduction of the sweet potato from the Americas to Polynesia. While present results do not relate to the feasibility of a transfer by purposeful navigation, they do indicate that this type of voyaging is not required in order to explain the introduction of the crop into Polynesia. The relatively high probability of occurrence and relatively short crossing times of trips from Northern Chile and Peru into the Marquesas, Tuamotu and Society groups are in agreement with the general consensus that this region encompasses the area of original arrival and subsequent dispersal of the sweet potato in Polynesia.     

Computer programmes for the correction of matrix effects in the XRF analysis of glass,ceramics and related silicate systems

The quantitative analysis of glass, ceramics and related silicate systems by means of energy dispersive X-ray fluorescence spectrometry is considered and problems arising from the selective absorption of X-rays in multi-element specimens are discussed. A computer programme written in FORTRAN and based upon a “semi-fundamental parameters” approach to the correction of matrix effects in glass and chemically similar materials is fully described. Model data are provided to enable the programme to be run and tested. An “empirical coefficients” computer programme for the quantitative analysis of silicate systems is outlined and the limitations of this type of programme are pointed out. The importance of adequate sample preparation prior to X-ray spectrometric analysis is stressed.     

Modeling the effect of mandatory district compactness on partisan gerrymanders

Geographic compactness standards have been offered as neutral and effective standards constraining redistricting. In this paper, we test this allegation. Redistricting is treated as a combinatoric optimization problem that is constrained by compactness rules. Computer models are used to analyze the results of applying compactness standards when political groups are geographically concentrated. Several population models are used to generate populations of voters, and arbitrary plans are created with combinatoric optimization algorithms. We find that compactness standards can be used to limit gerrymandering, but only if such standards require severe compactness. Compactness standards are not politically neutral—a geographically concentrated minority party will be affected by compactness standards much differently than a party supported by a geographically diffuse population. The particular effects of compactness standards depend on the institutional mechanism that creates districts.     

文物计算机辅助修复方法探讨

为提高文物的修复效率和修复质量,改变传统以人工技艺为主的修复方法,探讨利用计算机辅助文物修复方法。通过图像处理研究计算机辅助文物修复的设计方法,研究包括文物破损边界特征的数据提取,实现文物修复模型的生成、修复方案结构设计优化。以吴虎鼎为应用案例进行了试验。研究结果表明,计算机辅助修复可以缩短文物修复周期、提高文物修复质量。     

Using multivariate statistics and fuzzy logic system to analyse settlement preferences in lowland areas of the temperate zone: an example from the Polish Lowlands

The influence of relief, as well as other environmental features such as soils or the hydrological regime, on prehistoric settlement patterns is commonly accepted. Settlement patterns and preferences changed over time in different areas, so it is difficult to formulate general rules of human behaviour throughout history. In lowland areas of the temperate zone, which lack radical relief changes and have widespread access to water resources, specific settlement preferences and significant changes in these preferences are difficult to interpret.New methods developed to address the problem of the settlement transformations as a result of prehistoric settlement and economic processes using multivariate statistics have been adapted for the middle part of the Great Poland Lowland. In this region, data from the Polish Archaeological Record Project database have been used.Models of the dependence between geomorphological features and settlement intensity form the basis for estimating changes in prehistoric settlements. The degree of preference (or avoidance) is a nonparametric function of the number of archaeological sites observed in the area relative to the number of sites expected from a completely random pattern. The most crucial factors for settlement are distance to plateau edges, distance to water bodies, and the wetness index. The results show that the entire investigated area is more or less suitable for settlement, but the most occupied terrains are the areas near plateau edges.