胶东青铜器科学分析

本文通过考古实物的科学分析,认为早在西周时期胶东青铜技术便发展到了一定水平,战国后便发展到了较为成熟的阶段,大约自西周始,胶东青铜技术与中原便是大体同步发展了的.文章最后还将胶东青铜合金成分与《考工记·六齐》作了比较,并提出了“六齐”既不是生产经验的总结,也不是指导生产实践的工艺规范,而是一种试验资料的反映和归纳的观点。     

广西玉林市博物馆馆藏七件铜鼓的初步分析研究

迄今已有2 700多年历史的铜鼓,是南方少数民族地区节日、喜庆、兵事、婚丧、祭祀、礼乐等场合使用的一种重器。为了对锈蚀状况做出科学的现状评估,为器物保护修复技术路线的制定和修复工作的开展提供科学指导,对玉林市博物馆馆藏7件铜鼓综合运用了体视显微镜、金相显微镜、激光显微拉曼光谱仪(RS)和环境扫描电镜及能谱仪(ESEM-EDAX)等仪器进行了金相组织和合金成分分析以及锈蚀产物的分析。分析结果显示:7件器物皆为泥范铸造成型,未见热、冷加工处理现象。7件铜鼓皆为铅锡青铜合金,总体呈低锡高铅的特点。组织形态呈典型α固溶体树枝晶偏析,锡含量处于6.0%～12.2%,分布较为集中,处于中等含量水平(5%≤Sn15%);铅含量处于14.4%～28.2%,铅含量普遍较高且分布较为集中,处于中高铅(10%≤Pb15%)和高铅含量(Pb≥15%)水平,合金中高铅含量配比应为工匠有意合金配比选择;铜鼓的腐蚀类型为α固溶体富铜相优先腐蚀,保存环境主要是富氧、少氯,铜鼓表面锈蚀产物主要为绿色孔雀石和蓝色蓝铜矿以及氧化物,有少量白色白铅矿。在保护修复工作中对于这些无害锈可保留,不予处理,并注重防氧。对于铜鼓表面夹杂泥土,需进行清洗去除。研究结果可为器物保护修复技术路线的制定和修复工作的开展提供科学指导。     

Variation in human bone bioerosion during the Late Eneolithic/Bronze Age in Moravia (Czech Republic): A novel approach to BSE-SEM image quality and quantity assessment

Human bones from Late Eneolithic graves and Bronze Age settlement pits in Moravia (Czech Republic) were studied to reconstruct their post-mortem histories based on the distribution of their microbial destruction. Backscattered electrons in a scanning electron microscope (BSE-SEM) were used for visual assessment of bioerosion. Visual data from the histological analysis were transformed into quantitative data using the Waikato Environment for Knowledge Analysis (WEKA) toolkit. The results show that the presence of bioerosion is different between the two groups of samples. The bones from settlement pits display extensive bioerosion whereas the bones from graves display no or arrested bioerosion. The absence of bioerosion in graves is most probably linked with tomb burials of Corded Ware Culture. Given the tombs are frequently not preserved archaeologically, the state of bone bioerosion may serve as an indicator of their existence.     

Burial offerings in intramural tombs at Middle Bronze Age Megiddo

Tel Megiddo is a major type-site for the Middle Bronze in the Levant. During this period a new burial custom appeared in which the dead were interred beneath occupied houses. This tradition is well attested in Area K at the site. Area H, near the palatial complex, revealed a monumental masonry-constructed chamber tomb. This article presents the results of residue analysis conducted on ceramic vessels placed in these tombs as burial offerings. Hundreds of intramural Middle Bronze tombs with ceramic offerings were excavated in the Levant, but this is the first time the content of the vessels is revealed.     

The Analysis of Late Bronze Age Glass from Nuzi and the Question of the Origin of Glass‐Making

This paper re‐analyses a considerable corpus of glass from the Late Bronze Age site of Nuzi, found near Kirkuk in Iraq. SEM–WDS and Sr and Nd isotopic analysis were applied, in addition to cataloguing the glass. The work showed that the glass technology at Nuzi was subtly different from contemporary Egyptian sites, using different ways of opacifying and working glass. At least two, perhaps three, Near Eastern production sites are postulated. The range of glass colours and the skill of their application at Nuzi was perhaps not on a par with the Egyptian sites. This led to a reconsideration and review of the accepted wisdom that the Near East is the source of the innovation that is glass‐making. This opinion is based on limited textual and iconographic sources and is dominated by an erroneous early date for a very developed Nuzi glass industry along with a few finds of glass vessels in early contexts. Some of this evidence has now been at least questioned, suggesting that glass‐making in Egypt, at least as early as the middle of the 15th century bc , and probably earlier, is no later than that in the Near East. It is argued that it is far from clear that the Near East was the source of the innovation and that a more cautious approach would better fit the evidence.     

Improvements in Archaeomagnetic Dating in Western Europe from the Late Bronze to the Late Iron Ages: An Alternative to the Problem of the Hallstattian Radiocarbon Plateau

We present a new curve of the directional secular variation of the geomagnetic field in Western Europe between 1500 bce and 200 ce . Its computation relies on a Bayesian framework. The fast secular variation during the Late Bronze and Early Iron Ages makes archaeomagnetic dating efficient with a respective precision of 150–200 and 60–100 years during these periods. The Bayesian method also provides posterior date distributions that refine the dating of reference data, especially during the period of the Hallstattian radiocarbon plateau. Archaeomagnetism becomes a valuable alternative to radiocarbon and will help to improve the archaeological chronologies.     

试论前掌大墓地女性墓葬随葬兵器现象

滕州前掌大墓地中随葬兵器的墓葬较多,特别是女性墓葬中随葬兵器的现象较之于其他地区更为多见亦罕见于海岱地区。产生这种现象的原因可能与商末周初时女性社会地位较高和前掌大地处战事频繁的东夷重地有关,也许正因如此,前掌大墓地的女性生前可能参与作战。     

东下冯遗址冶铸遗存研究

本研究对东下冯遗址出土的17件第三期冶金遗物进行了金相和扫描电子显微镜-能谱分析。其中1件附渣冰铜块的检测表明该遗址的铜有独立于锡、铅料的来源。熔铜渣及铜块的分析表明第三期时已经使用锡青铜,同时还有铅青铜、铅锡青铜、砷铜等合金种类的应用。青铜合金通过向红铜中添加锡、铅物料(可能含砷)得到,与二里头等遗址类似。     

桂平博物馆馆藏东汉双耳铜甑铸造工艺及其保护修复研究

广西桂平博物馆藏东汉铜甑对于研究广西地区青铜器冶铸技术的发展具有重要的研究价值。但器物长期保存于潮湿环境中,矿化严重、保存状况较差,亟须保护修复。本研究应用X射线影像观察、金相显微镜、扫描电镜及能谱分析、模拟实验验证等方法研究了器物的铸造工艺、合金成分以及锈蚀产物成分。结果表明该器物为整体铸造成形,器物铸造时使用了轮制技术、刮板造型工艺以及铸后刻纹的工艺,箅部范块制作过程是用器身模翻制器身范后脱模,将器身模的圈足部分切下,然后在圈足泥模上刻出箅部型腔。在此基础上,遵循最低限度干预原则,力求将传统的文物修复手段与现代修复理念相结合,通过除锈、修补等保护修复措施后,不但提高了器物的整体稳定性,而且达到了可以展陈,发掘文物潜在价值的要求。     

Late Bronze Age Copper Smelting Slags from Luserna (Trentino,Italy): Interpretation of the Metallurgical Process

In the Late Bronze Age, the extractive metallurgy of copper in north‐eastern Italy achieved a peak of technological efficiency and mass production, as evidenced by the substantial number of metallurgical sites and the large volume of slags resulting from smelting activities. In order to define the technological features of the Late Bronze Age metallurgical process, more than 20 slags from the smelting site of Luserna (Trentino, Italy) were fully analysed by means of optical microscopy, X‐ray powder diffraction, X‐ray fluorescence spectrometry and scanning electron microscopy. Three different slag types were identified based on mineralogical and chemico‐physical parameters, each being interpreted as the product of distinct metallurgical steps. A Cu‐smelting model is proposed accordingly.