广西玉林市博物馆馆藏七件铜鼓的初步分析研究

迄今已有2 700多年历史的铜鼓,是南方少数民族地区节日、喜庆、兵事、婚丧、祭祀、礼乐等场合使用的一种重器。为了对锈蚀状况做出科学的现状评估,为器物保护修复技术路线的制定和修复工作的开展提供科学指导,对玉林市博物馆馆藏7件铜鼓综合运用了体视显微镜、金相显微镜、激光显微拉曼光谱仪(RS)和环境扫描电镜及能谱仪(ESEM-EDAX)等仪器进行了金相组织和合金成分分析以及锈蚀产物的分析。分析结果显示:7件器物皆为泥范铸造成型,未见热、冷加工处理现象。7件铜鼓皆为铅锡青铜合金,总体呈低锡高铅的特点。组织形态呈典型α固溶体树枝晶偏析,锡含量处于6.0%～12.2%,分布较为集中,处于中等含量水平(5%≤Sn15%);铅含量处于14.4%～28.2%,铅含量普遍较高且分布较为集中,处于中高铅(10%≤Pb15%)和高铅含量(Pb≥15%)水平,合金中高铅含量配比应为工匠有意合金配比选择;铜鼓的腐蚀类型为α固溶体富铜相优先腐蚀,保存环境主要是富氧、少氯,铜鼓表面锈蚀产物主要为绿色孔雀石和蓝色蓝铜矿以及氧化物,有少量白色白铅矿。在保护修复工作中对于这些无害锈可保留,不予处理,并注重防氧。对于铜鼓表面夹杂泥土,需进行清洗去除。研究结果可为器物保护修复技术路线的制定和修复工作的开展提供科学指导。     

高颐阙残损阙檐的修复技术

高颐阙是东汉晚期的红色砂岩的建筑物。位于四川省雅安市。阙檐东面残缺.导致日晒雨淋加剧,苔藓丛生,从而引起严重风化。为此,对残损阙檐进行了修复。根据高颐阙的结构.雅安市的气候特征及阙石的化学组成和物理性质.讨论了薄片检查和 X 衍射分析的结果、修复残缺阙檐的理论基础以及计算、修复的程序和效果。     

The Geochemical Fingerprint of Tufo Lionato Blocks from the Area Sacra di Largo Argentina: Implications for the Chronology of Volcanic Building Stones in Ancient Rome

We use trace element discrimination diagrams to provide a geochemical fingerprint for Tufo Lionato, the volcanic rock most commonly used in the ancient Roman dimension stone technique. Based on the comparison of their geochemical signatures, we identify different rock facies of Tufo Lionato employed since the fourth to third centuries and through the second century bce in the construction of the temples of the Area Sacra di Largo Argentina. These rock facies correspond to two previously identified building stones: Aniene Tuff and Monteverde Tuff, named after their supposed source areas located in the Aniene River Valley and in the homonymous locality of the Tiber River Valley, respectively. However, the results of our study demonstrate previous misidentification of these volcanic rocks in the different construction phases of Temple C, providing a revision of the dating system currently accepted for the diffusion of Tufo Lionato architecture. We show that the Aniene facies has been exploited since the end of the fourth century bce and that it was employed along with Tufo Giallo della Via Tiberina in the podium and staircase of Temple C, whereas observations at Largo Argentina suggest that the ‘Monteverde Tuff’ was only sporadically used in the early phases of the dimension stone construction technique.     

Smart Lead Rubber Bearings Equipped with Ferrous Shape Memory Alloy Wires for Seismically Isolating Highway Bridges

Shape memory alloys (SMA) can substantially improve the damping capacity and re-centering capability of elastomeric isolators. The objective of this study is to assess the seismic performance of smart lead rubber bearings (LRBs) equipped with double cross ferrous SMA wires. Hysteretic shear response of SMA wire-based LRB is determined using finite element method. The seismic response of a multispan continuous steel girder bridge isolated by SMA-LRB is evaluated. Hybrid SMA-LRB bearing exhibits a significantly lower shear strain demand (up to 46% reduction) and a higher energy dissipation capacity (up to 31% increase) compared to the LRB.     

南诏大理国金属佛像制作工艺初探

为研究南诏大理国金属佛像的制作工艺,对部分金属佛像进行了科学分析,表明制作各种铜佛像时,主要使用失蜡铸造工艺,已使用多种金属元素作为材质,阿嵯耶观音像和其他铜像是以含砷的铜合金为特征,金质佛像的材质主要用金银合金,铸造小铜佛像则采用复杂的合金成分配比。根据铭文和绘画资料分析,这些金属佛像主要是大理本地的工匠制作。     

Traditions and transitions in Korean bronze technology

Metallurgical examination of Korean bronze artifacts shows that a technical tradition based on casting and use of leaded high-tin alloys was established in Korea at the early stages of bronze use. After the subsequent discovery of quenching methods that suppress formation of the brittle δ phase, new thermo-mechanical techniques were introduced between the 7th and 10th centuries AD. Lead-free alloys were used, and tin contents near that of the peritectic point in the Cu–Sn phase diagram were chosen. Leaded high tin alloys continued in use, but only in cast objects, and with significant composition variation. The unique conditions during the time of innovation suggest that the transition to new metallurgical techniques was gradually achieved through domestic technical innovation inspired by external influences.     

Different Preparation Techniques – Similar Results? On the Quality of Thin‐Ground Sections of Archaeological Bone

Palaeohistology as a valuable diagnostic instrument is dependent on the production of high‐quality thin‐ground sections from dry bone. The objective of this study was to consider technical differences and assess the qualitative outcomes of five techniques for preparing thin‐ground sections from dry archaeological bone. Established techniques with long follow‐up times and excellently documented results were compared with simpler and cheaper time‐saving techniques. Evaluations were made of the quality of thin sections obtained by one classical machine‐based embedding technique, two revised versions of the same technique, one manual moulding technique based on Frost's rapid technique and one manual hybrid technique. Five osteological specimens of differing quality were prepared following the manuals for these five techniques and examined microscopically with respect to a list of standardised histological and diagenetic parameters. Alterations in the specimens attributable to preparation effects were recorded, and observations were scored with reference to three criteria: section quality, technical quality and staining. The results show that embedding techniques are to prefer. Superglue should not be used as a mounting or embedding medium. Manual grinding comes with several limitations, and machine cutting and grinding are preferred. Haematoxylin staining can be successfully applied to embedded specimens, giving more information on microscopic diagenetic processes. A stepwise manual for a revision of the classical embedding technique is presented. The time required for producing sections using classical embedding techniques is shortened from 6 weeks to 3.7 days by refining the preparation/polymerization processes involved with no loss of osteological data. Copyright © 2014 John Wiley & Sons, Ltd.     

传世纺织品文物除尘方法研究——以湖蓝色缎绣凤纹大卧单为例

传世纺织品文物表面蒙尘、污染是一种较为普遍的病害。除尘成为了传世纺织品文物保护修复过程中极为重要的一环。针对不同状态的文物,如何安全、有效、便捷地进行除尘工作成了本研究的方向。本工作主要研究原陈设于养心殿体顺堂的湖蓝色缎绣凤纹大卧单的除尘方法。首先,对现有传世纺织品文物的物理除尘方法进行归纳,总结为5种类型：吸尘法、擦拭法、震动法、粘附法和凝胶法。其次,对该文物进行全面研究,包括制作工艺、图案样式、病害分析、试验检测等。研究结果为：该文物是双层罩面罩里加四周缝网穗制作,面主要为绒线绣、捻线绣花鸟纹;黄色绣线出现合成染料酸性偶氮染料,推测可能是19世纪末至20世纪初生产;绣线纤维强度较好,绣底局部糟朽,具备一定除尘条件。再次,通过除尘实验对比博物馆专用吸尘器、真空负压液态过滤除尘设备、超细纤维布作用文物的除尘效果。实验结果确定除尘方法为：首先用博物馆专用吸尘器进行第一遍的初步除尘,然后用真空负压液态过滤除尘设备进行第二遍的精细除尘。最后,结合文物织造、刺绣的工艺特点,将文物局部特征分类为：缎底、缎面开裂、压瓣、出边、水路、绒线绣线、加捻绣线、打籽绣,并研究分析针对它们的除尘手法。相比以往...     

清代银覆斛式套杯装饰工艺研究

故宫博物院收藏的银覆斛式套杯档案记载为明代,由十二件依次能叠放在一起的银杯组成,每件银杯均镶嵌黑色物质以在内壁形成历代名人高士典故为题材的装饰画,内底注释典故名称,外底标明斋堂款识,外壁其中一面注明制作材料来源的“大明皇帝赐金”字样。故宫博物院张丽研究员根据“醉卧瓮下”历史典故产生的时代背景,推测其制作时代定为清代。在我国,银器表面镶嵌黑色物质的工艺十分罕见,一些学者将银套杯镶嵌黑色物质的工艺称为“阴刻填黑漆”,而查阅资料发现银套杯的表面装饰工艺更可能为乌银镶嵌。乌银在国外被称为“niello”,是指一种或多种金属与硫在高温下生成的黑色金属硫化物,被用来装饰金、银和铜等金属器物。将乌银实施于金属器表面的工艺被称为乌银镶嵌。为了明确银套杯的表面装饰工艺,采用扫描电子显微镜-能谱仪、X射线荧光光谱法、X射线衍射法对其中一个银杯进行微观形貌观察,元素、物相进行分析。显微形貌观察结果表明黑色物质通过加热熔融的方法嵌入嵌槽,在固化后进行抛光使表面平整。能谱分析结果表明黑色物质由Cu、Pb、Ag和S元素组成,衍射分析结果表明检测样品中含有硫铜银矿。综合以上分析结果表明黑色物质为银/铜/铅硫化物形成...     

博物馆环境监控及相关物联网技术应用需求分析

对博物馆环境实施有效的监控,是预防性保护珍贵文物的有效途径。为广泛发挥物联网在博物馆文物保存环境监控方面的作用,阐述了基于"洁净"概念的博物馆环境及其预防性保护内涵,分析了博物馆环境温湿度、污染气体、光辐射、有害生物四方面监控的特点与需求,介绍了无线传感网络技术在几项重大文物展览活动中的有效应用情况,指出大力加强博物馆环境适宜的监测技术研发,是实现博物馆环境风险预控的关键。