Modelling and Seismic Response Analysis of Italian Code-Conforming Base-Isolated Buildings

ABSTRACT

This paper reports on results of nonlinear analyses performed within the RINTC project on an RC building isolated with different systems (High Damping Rubber Bearings, High Damping Rubber Bearings and Flat Sliding Bearings, Friction Pendulum System) and designed according to the Italian design code. The seismic response has been evaluated under different seismic input levels of two sites with different hazard and by considering two Limit States: Global Collapse and Usability-Preventing Damage. The influence of seismic stoppers and modelling uncertainties is also evaluated. Results permit to compute the implicit collapse risk and to identify critical aspects of current design procedures.     

Direct Displacement-Based Design of Buildings with Different Seismic Isolation Systems

A displacement-based design (DBD) procedure for buildings equipped with different seismic isolation systems is proposed. It has been derived from the Direct Dispaced-Based Design (DDBD) method recently developed by Priestley et al. [2007] Priestley, M. J. N., Calvi, G. M. and Kowalsky, M. J. 2007. Displacement-Based Seismic Design of Structures, Pavia, , Italy: IUSS Press.  [Google Scholar]. The key aspect of the proposed procedure is the definition of a target displacement profile for the structure. It is assigned by the designer to achieve given performance levels, expressed in terms of maximum displacement of the isolation system and maximum interstory drift. The proposed design procedure has been developed for four different idealized force-displacement relationships, which can describe the cyclic response of a wide variety of isolation systems, including: (i) Lead-Rubber Bearings (LRB); (ii) High-Damping Rubber Bearings (HDRB); (iii) Friction Pendulum Systems (FPS); and (iv) Combinations of lubricated Flat Sliding Bearings (FSB) with different re-centering and/or energy dissipating auxiliary devices. In this article, the background and implementation of the design procedure is presented first. It is followed by the results of validation studies based on nonlinear time-history analyses on different design configurations of base isolated buildings.     

Nonlinear Static Methods vs. Experimental Shaking Table Test Results

Three different Nonlinear Static Methods (NSM's), based on pushover analysis, are applied to a 3-story, 2-bay, RC frame. They are (i) the Capacity Spectrum Method (CSM), described in ATC-40, (ii) the Displacement Coefficient Method (DCM), presented in FEMA-273 and further developed in FEMA 356, and (iii) the N2 Method, implemented in the Eurocode 8. Pushover analyses are conducted with DRAIN-3DX by using four different lateral force distributions, according to the acceleration profile assumed along the height of the structure: uniform, triangular, modal-proportional, and multimodal fully adaptive. In the numerical model, RC members are modeled as fiber elements.

The numerical predictions of each method are compared to the experimental results of the shaking table tests carried out on two similar 1:3.3-scale structural models, with and without infilled masonry panels, respectively. The comparison is made in terms of maximum story displacements, interstory drifts, and shear forces. All the NSM's are found to predict with adequate accuracy the maximum seismic response of the structure, provided that the associated parameters are properly estimated. The lateral load pattern, instead, is found to little affect the accuracy of the results for the three-story model considered, even if collapse occurs with a soft story mechanism.     

Application of Shape Memory Alloys in Historical Constructions

A device prototype, based on the superelastic properties of Shape Memory Alloys (SMAs), is proposed to enhance the thermal and seismic behavior of steel tie-rods. First, the thermal behavior of steel tie-rods with and without SMAs is presented based on the results of extensive experimental tests in thermal room. Next, the seismic performances of the proposed SMA system are discussed based on the results of a series of shaking table tests on a 1:4-scale timber roof truss model. In this article, the functioning principles of the proposed SMA-based device prototype are illustrated and the main aspects related to its implementation in practice are discussed in detail. Finally, a recent example of application of the proposed technology to a historic single-aisle church, realized in the 13th century in Brindisi (southern Italy), and equipped with inadequate and deteriorated steel tied rods, is shown.     

Cost-Benefit Analysis of Alternative Retrofit Strategies for RC Frame Buildings

Monetary losses induced by earthquakes in Reinforced Concrete (RC) buildings are mainly due to damage to non-structural elements (infills, partitions, finishes, etc.). In this study, alternative retrofit strategies for reducing monetary losses in RC frame buildings are examined. They include local strengthening of infills (and partitions) and seismic isolation. The Expected Annual Loss (EAL) of a number of RC frame buildings, pre- and post-rehabilitation, is evaluated, following the time-based assessment approach proposed in the FEMA P-58 guidelines. The breakeven time of each retrofit intervention is then computed, considering the initial cost of the intervention and the expected benefit in terms of EAL reduction.