DESIRABLE STRENGTH DISTRIBUTION FOR ASYMMETRIC STRUCTURES WITH STRENGTH-STIFFNESS DEPENDENT ELEMENTS

Recent studies have shown that for many reinforced concrete lateral force-resisting elements (LFRE) stiffness is dependent on strength, and as a result strength assign-ment to these elements would affect both the strength and stiffness distributions in a structure. As a consequence, stiffness distribution cannot be considered known prior to strength assignment. This implies that in assigning strength to LFRE, the designer has the ability not only to prescribe the strength distribution, but also indirectly control the stiffness distribution in the structure. In this paper, a study is made on the seis-mic performance of a number of single-story structures to reconfirm that the “balanced CV-CR location” criterion, previously suggested by the writers, constitutes a desirable strength/stiffness distribution for minimising torsional response of asymmetric reinforced concrete structures.     

A PRACTICAL MODEL FOR SEISMIC ANALYSIS OF REINFORCED CONCRETE SHEAR WALL BUILDINGS

A simple macro-model for reinforced concrete shear walls is proposed, which consists of spring elements representing flexure and shear behaviour. The model for flexural behaviour is based on section analysis, while the model for shear behaviour is based on key parameters of the flexural behaviour. Four wall test specimens are selected to evaluate the reliability of the model. Modelling parameters for the backbone curves and the hysteretic rules are examined by conducting static and time history analyses, with the hysteretic response of a test specimen compared to that calculated using the proposed model. Results show some differences between measured and calculated shear force versus shear distortion relationships, but the model is acceptable because the differences do not significantly affect calculated global response. Parametric studies are also conducted to examine the influence of modelling parameters on seismic demand and capacity, which are the major design parameters for structural performance evaluation. Differences due to variation in modelling parameters are not significant, further indicating that the proposed model is reasonable.     

A DAMAGE MODEL FOR THE ANALYSIS OF THE SEISMIC RESPONSE OF MONUMENTAL BUILDINGS

In this paper the Author proposes a damage model for the analysis of masonry plates and shells, which is based on an improvement of a previous constitutive model. The modifications introduced, connected to the head joint damage, allow us to study the influence of masonry texture on the damage modes once the mechanical characteristics of the elements constituting the masonry and the results of tests on simple assemblages are known. Having a nonlinear constitutive model is certainly one of the basic elements for understanding the damage mechanisms in masonry buildings. If, in fact, an elastic-linear constitutive model may be used under normal loading conditions, in critical situations it is necessary to model the damage and the dissipation mechanisms that occur between the elements, stone (brick) and mortar, in correlation with their characteristics and kind of masonry. To validate the model a comparison is made between the numerical and experimental results, in the case of tests available in the literature in masonry panels subjected to out-of plane loading and in a real structure through the observation of the damage in Umbria (Italy) surveyed after the 1997 earthquake.     

EVALUATION OF CONVENTIONAL AND ADAPTIVE PUSHOVER ANALYSIS I: METHODOLOGY

In this paper, a methodology is suggested and tested for evaluating the relative performance of conventional and adaptive pushover methods for seismic response assessment. The basis of the evaluation procedure is a quantitative measure for the difference in response between these methods and inelastic dynamic analysis which is deemed to be the most accurate. Various structural levels of evaluation and different incremental representations for dynamic analysis are also suggested. This method is applied on a set of eight different reinforced concrete structural systems subjected to various strong motion records. Sample results are presented and discussed while the full results are presented alongside conclusions and recommendations, in a companion paper.     

Displacement Ductility Limits for Pile Foundations in Cohesionless Soils

The displacement ductility limit for seismic design of concrete piles is determined for the range of cohesionless soils expected in practice. The curvature ductility capacity associated with specified performance limit states, namely, the “serviceability” and “damage-control” limits, is determined based on the current provisions for confining steel. An analytical model is applied to assess the displacement ductility factor at the specified curvature ductility level. The investigated parameters include the soil stiffness, pile diameter, longitudinal reinforcement ratio, axial force level, and pile above-ground height. A set of design displacement ductility factors is recommended and verified to ensure the satisfactory seismic performance.     

Seismic behavior of two Portuguese adobe buildings: part II —numerical modeling and fragility assessment

Considering the likely unfavorable behavior under seismic action of adobe construction, this article aims at providing a seismic fragility characterization of two adobe Portuguese traditional buildings, using numerical models calibrated over experimental results. The study of such two case-study buildings in the region of Aveiro contributes to the understanding of the seismic fragility of adobe construction in the region in general. The buildings were numerically modeled to estimate their structural behavior under seismic loading using adobe material properties that were calibrated based on the experimental results of a cyclic in-plane test of a full-scale double-Tshaped adobe wall. The method chosen to characterize adobe masonry and model its nonlinear behavior followed a total strain crack-based macro-modeling (TSCM) approach, whereas pushover analysis was carried out to reproduce the pseudo-static experimental test in order to enable a refined calibration of adobe masonry mechanical properties. Fragility functions were then derived, based on the above-mentioned numerical models, using nonlinear static analysis, bringing further insight on the seismic fragility of traditional Portuguese adobe construction.     

Seismic performance of historical vaulted adobe constructions: a numerical case study from Yazd,Iran

Past earthquakes have demonstrated that historical vaulted adobe buildings are highly vulnerable to seismic actions. Hence, it is crucial for such building typologies to be evaluated in terms of seismic capacity. To this end, this article deals with the seismic performance of historical vaulted adobe houses from the city of Yazd, Iran as one of the seismically active areas of the world and possessing a very rich adobe heritage. Thus, and based on a detailed geometrical survey, a representative sample of adobe houses from Yazd was studied using a simplified in-plane analysis based on three geometric indexes. Concerning the out-of-plane behavior, a deeper assessment was conducted by performing a numerical study, where the main influential parameters on the seismic behavior of vaulted adobe buildings were considered. The numerical analyses were carried out by adopting the limit analysis theory implemented in the Block2D software. The results obtained indicate the safe in-plane behavior of most of the houses and the safe out-of-plane response of the sample under gravitational loads. However, the sample out-of-plane safety under earthquake-induced loads seems to be a matter of concern.     

Reinforcement of the 18th Century Buttresses of Maniace Castle: Design and Execution

ABSTRACT

Maniace Castle, built on Ortygia island in Siracusa (Italy) in the first half of the 13th century and hosting a magnificent hypostyle hall (the Salone), a square area covered by 25 cross vaults supported by columns, was severely damaged by the 1693 earthquake and the explosion of the ammunition dump in 1704. The buttresses, built immediately afterward to counteract the thrust of the 10 surviving vaults, did not guarantee adequate seismic safety so that a metal scaffolding was installed in 2001 to prevent an overturning mechanism. This article discusses the design and execution of an external pre-stressing steel system to increase existing buttress strength and the seismic capacity of the Salone, starting with historical and constructional analyses and dealing with both analytical and technical aspects. The monitoring system installed to detect structural response during and after the working execution is shown, along with some of the data acquired so far.     

Building survey forms for heterogeneous urban areas in seismically hazardous zones. Application to the historical center of Valparaíso,Chile

ABSTRACT

Building survey is an essential data-collection procedure to feed large-scale seismic vulnerability assessment. The available strategies usually consider survey forms to gather information about the urban buildings. The application of the available survey forms poses important challenges for the case of the heterogeneous urban centers including different structural typologies. This work proposes four specific survey forms for traditional structural typologies constructed with masonry, reinforced concrete, mixed steel-reinforced concrete, and timber. The proposed forms request essential information on the parameters necessary for seismic vulnerability assessment, by evaluating the lateral-load resistant system, regularity, condition of conservation, and existing damages. The survey forms were applied to the study of 111 buildings of the historical center of Valparaíso, Chile. The proposed methodology was complemented with the use of Geographic Information Systems to obtain a complete database with the structural characterization of the most representative typologies for future works of large-scale seismic vulnerability assessment.     

Damage Assessment of Unreinforced Stone Masonry Buildings After the 2010–2011 Canterbury Earthquakes

The sequence of earthquakes that has affected Christchurch and Canterbury since September 2010 has caused damage to a great number of buildings of all construction types. Following post-event damage surveys performed between April 2011 and June 2011, an inventory of the stone masonry buildings in Christchurch and surrounding areas was carried out in order to assemble a database containing the characteristic features of the building stock, as a basis for studying the vulnerability factors that might have influenced the seismic performance of the stone masonry building stock during the Canterbury earthquake sequence. The damage suffered by unreinforced stone masonry buildings is reported and different types of observed failures are described using a specific survey procedure currently in use in Italy. The observed performance of seismic retrofit interventions applied to stone masonry buildings is also described, as an understanding of the seismic response of these interventions is of fundamental importance for assessing the utility of such strengthening techniques when applied to unreinforced stone masonry structures.