Indications of formation water flow and compartmentalization on the flank of a salt structure derived from salinity and seismic data

Vertical and lateral variations in lithology, salinity, temperature, and pressure determined from wireline LAS logs, produced water samples, and seismic data on the south flank of a salt structure on the continental shelf, offshore Louisiana indicate three hydrogeologic zones in the study area: a shallow region from 0 to 1.1 km depth with hydrostatically pressured, shale‐dominated Pleistocene age sediments containing pore waters with sea water (35 g l^?1) or slightly above sea water salinity; a middle region from 1.1 to 3.2 km depth with near hydrostatically pressured, sand‐dominated Pliocene age sediments that contain pore waters that range from seawater salinity to up to 5 times sea water salinity (180 g l^?1); and a deep section below 3.2 km depth with geopressured, shale‐dominated Miocene age sediments containing pore waters that range from sea water salinity to 125 g l^?1. Salt dissolution has generated dense, saline waters that appear to be migrating down dip preferentially through the thick Pliocene sandy section. Sand layers that come in contact with salt contain pore waters with high salinity. Isolated sands have near sea water salinity. Salinity information in conjunction with seismic data is used to infer fluid compartmentalization. Both vertical and lateral lithologic barriers to fluid flow at tens to hundreds of meters scale are observed. Fluid compartmentalization is also evident across a supradomal normal fault. Offset of salinity contours are consistent with the throw of the fault, which suggests that saline fluids migrated before fault formation.     

The Railways of Britain: An Unstudied Map Corpus

ABSTRACT

Railway mapping, a distinctive genre of cartography, came into existence with the invention of railway transport in Britain. The planned route for the first public railway, the Stockton & Darlington Railway, was surveyed by 1820 as a statutory requirement for the Act of Parliament that was necessary before construction could proceed. The Stockton & Darlington Railway was granted its Act in 1821 and opened in 1825. From then on, an abundance of maps, plans, diagrams and technical drawings were created to enable railways to be planned, constructed and operated; to be changed, developed and regulated; to attract business and passengers; and to provide railway staff with a range of specialist tools. Today, Britain probably has the largest surviving corpus of such material, but owing to the essentially private nature of the preparation and use of railway maps, it remains largely unstudied and therefore scarcely evaluated in terms of its historical worth. This paper summarizes the archival history of Britain's railway maps and describes eleven broad categories of railway cartography that collectively form a coherent body of maps covering much of the nineteenth and twentieth centuries, and which await better access and comprehensive study. It also underlines the urgency of ensuring the preservation of the railway map archive from further loss and destruction.     

虚拟社区信息流导引现实社区人流的特征——以杭州市智能居住小区网站为例

虚拟社区的广泛应用已给现实社区带来了多方面的深刻影响。其中一类虚拟社区与现实社区已逐步融合,并形成了半虚拟半现实的社区结构,城市智能居住小区即属于这种情况,它为地理学研究虚拟社区问题提供了参考对象。本文的研究目的是为了揭示虚拟社区信息流对现实居住社区人流导引作用的特征。在对国内外研究进行回顾后,以杭州市智能小区为例,分析了其网站信息流导引人流的两点表现-存在性与同质性。研究发现虚拟社区对现实居住行为的导引是客观存在的,其中网站智能性在导引中发挥了巨大作用;而受影响人群的同质化是虚拟社区信息流对居住人群导引的突出特征。     

Evolution of porosity, permeability and fluid pressure in dilatant faults post-failure: implications for fluid flow and mineralization

Mineralization of brittle fault zones is associated with sudden dilation, and the corresponding changes in porosity, permeability and fluid pressure, that occur during fault slip events. The resulting fluid pressure gradients cause fluid to flow into and along the fault until it is sealed. The volume of fluid that can pass through the deforming region depends on the degree of dilation, the porosity and permeability of the fault and wall rocks, and the rate of fault sealing. A numerical model representing a steep fault cutting through a horizontal seal is used to investigate patterns of fluid flow following a dilatant fault slip event. The model is initialized with porosity, permeability and fluid pressure representing the static mechanical state of the system immediately after such an event. Fault sealing is represented by a specified evolution of porosity, coupled to changes in permeability and fluid pressure, with the rate of porosity reduction being constrained by independent estimates of the rate of fault sealing by pressure solution. The general pattern of fluid flow predicted by the model is of initial flow into the fault from all directions, followed by upward flow driven by overpressure beneath the seal. The integrated fluid flux through the fault after a single failure event is insufficient to account for observed mineralization in faults; mineralization would require multiple fault slip events. Downward flow is predicted if the wall rocks below the seal are less permeable than those above. This phenomenon could at least partially explain the occurrence of uranium deposits in reactivated basement faults that cross an unconformity between relatively impermeable basement and overlying sedimentary rocks.     

A vector of high‐temperature paleo‐fluid flow deduced from mass transfer across permeability barriers (quartz veins)

Quartz veins acted as impermeable barriers to regional fluid flow and not as fluid‐flow conduits in Mesoproterozoic rocks of the Mt Painter Block, South Australia. Systematically distributed asymmetric alteration selvedges consisting of a muscovite‐rich zone paired with a biotite‐rich zone are centered on quartz veins in quartz–muscovite–biotite schist. Geometric analysis of the orientation and facing of 126 veins at Nooldoonooldoona Waterhole reveals a single direction along which a maximum of all veins have a muscovite‐rich side, irrespective of their specific individual orientation. This direction represents a Mesoproterozoic fluid‐flow vector and the veins represent permeability barriers to the flow. The pale muscovite‐rich zones formed on the downstream side of the vein and the dark biotite‐rich zones mark the upstream side. The alteration couplets formed from mica schist at constant Zr, Ga, Sc, and involved increases in Si, Na, Al and decreases in K, Fe, Mg for pale alteration zones, and inverse alteration within dark zones. The asymmetry of the alteration couplets is best explained by the pressure dependence of mineral–fluid equilibria. These equilibria, in combination with a Darcian flow model for coupled advection and diffusion, and with permeability barriers imposed by the quartz veins, simulate the pattern of both fluid flow and differential, asymmetric metasomatism. The determined vector of fluid flow lies along the regional foliation and is consistent with the known distribution of regional alteration products. The presence of asymmetric alteration zones in rock containing abundant pre‐alteration veins suggests that vein‐rich material may have generally retarded regional fluid flow.     

Relationship between deformation bands and petroleum migration in an exhumed reservoir rock,Los Angeles Basin,California, USA

An oil‐bearing sandstone unit within the Monterey Formation is exposed in the Los Angeles Basin along the Newport‐Inglewood fault zone in southern California. The unit preserves structures, some original fluids, and cements that record the local history of deformation, fluid flow, and cementation. The structures include two types of deformation bands, which are cut by later bitumen veins and sandstone dikes. The bands formed by dilation and by shear. Both types strike on average parallel to the Newport‐Inglewood fault zone (317°–332°) and show variable dip angles and directions. Generally the older deformation bands are shallow, and the younger bands are steep. The earlier set includes a type of deformation band not previously described in other field examples. These are thin, planar zones of oil 1–2 mm thick sandwiched between parallel, carbonate‐cemented, positively weathering ribs. All other deformation bands appear to be oil‐free. The undeformed sandstone matrix also contains some hydrocarbons. The oil‐cored bands formed largely in opening mode, similar to dilation bands. The oil‐cored bands differ from previously described dilation bands in the degree of carbonate cementation (up to 36% by volume) and in that some exhibit evidence for plane‐parallel shear during formation. Given the mostly oil‐free bands and oil‐rich matrix, deformation bands must have formed largely before the bulk of petroleum migration and acted as semi‐permeable baffles. Oil‐cored bands provide field evidence for early migration of oil into a potential reservoir rock. We infer a hydrofracture mechanism, probably from petroleum leaking out of a stratigraphically lower overpressured reservoir. The deformation bands described here provide a potential field example of a mechanism inferred for petroleum migration in modern systems such as in the Gulf of Mexico.     

Migration of Mn-rich fluids through normal faults and fine-grained terrigenous sediments during early development of the Neogene Vallès-Penedès half-graben (NE Spain)

The Miocene siliciclastic sediments infilling the Vallès‐Penedès half‐graben are affected by two sets of structures developed during the extensional tectonics that created the basin. The first set, represented by extension fractures infilled with mud and sands, is attributed to seismically induced liquefaction. The second set, represented by normal faults, corresponds to a high‐permeability horsetail extensional fracture mesh developed near the surface in the hanging walls of normal faults. The incremental character of the vein‐fills indicates episodic changes in the tectonic stress state and fault zone permeability. Two episodes of fluid migration are recorded. The first episode occurred prior to consolidation and lithification when shallow burial conditions allowed oxidizing meteoric waters to flow horizontally through the more porous and permeable sandy layers. Development of clastic dikes allowed local upward flow and dewatering of the sandy beds. Liquefaction and expulsion of fluids were probably driven by seismic shaking. During the first episode of fluid migration there was no cementation of the sandstone or within the fractures, probably because little fluid was mobilized by the predominantly compaction‐driven flow regime. The second episode of fluid migration occurred synchronously with normal fault development, during which time the faults acted as fluid conduits. Fluids enriched in manganese, probably leached from local manganese oxyhydroxides soon after sedimentation, moved laterally and produced cementation in the sandstone layers, eventually arriving at the more porous and permeable fault pathways that connected compartments of different porosities and permeabilities. Carbonate probably precipitated in fractures saturated with meteoric water near the ground surface at a transitional redox potential. Once the faults became occluded by calcite cement, shortly after fault development, they became barriers to both vertical and horizontal fluid flow.     

Fluid evolution along multistage composite fault systems at the southern margin of the Lower Palaeozoic Anglo-Brabant fold belt, Belgium

Mineralised vein systems have been investigated at nine localities at the southern margin of the Anglo‐Brabant fold belt in Belgium. During the late Silurian to early Middle Devonian Caledonian orogeny, shear zones formed, inferred to be associated with granitoid basement blocks in the subsurface. The circulation of a metamorphic fluid, possibly originating in the Cambrian core of the fold belt, along these shear zones resulted in the formation of mesozonal orogenic mineralisation at the southern margin of the Anglo‐Brabant fold belt. The fluid had a composition dominated by H₂O–CO₂–X–NaCl–KCl. The shear zones form part of a greater fault zone, the Nieuwpoort–Asquempont fault zone, which is characterised by normal faulting that started before the Givetian and by the reactivation of the shear zones. Two fluid generations are associated with this normal faulting. First, a low salinity H₂O–NaCl(–KCl) fluid migrated through the Palaeozoic rocks after the Silurian. Based on the isotopic composition, this fluid could be a late‐metamorphic Caledonian fluid or a younger fluid that originated from the Rhenohercynian basin and interacted with Lower Devonian rocks along its migration path. Second, a high salinity H₂O–NaCl–CaCl₂ fluid was identified in the fault systems. Similar fluids have been found in southern and eastern Belgium, where they produced Mississippi Valley‐type Zn–Pb deposits. These fluids are interpreted as evaporative brines that infiltrated the Lower Palaeozoic basement, from where they were expelled during extensional tectonism in the Mesozoic.     

Inferring intermediate‐scale fluid flow in a heterogeneous metasedimentary multilayer sequence during progressive deformation: evidence from the Monts d’Arrée slate belt (Brittany,France)

Quartz veins in the early Variscan Monts d’Arrée slate belt (Central Armorican Terrane, Western France), have been used to determine fluid‐flow characteristics. A combination of a detailed structural analysis, fluid inclusion microthermometry and stable isotope analyses provides insights in the scale of fluid flow and the water–rock interactions. This research suggests that fluids were expelled during progressive deformation and underwent an evolution in fluid chemistry because of changing redox conditions. Seven quartz‐vein generations were identified in the metasedimentary multilayer sequence of the Upper Silurian to Lower Devonian Plougastel Formation, and placed within the time frame of the deformation history. Fluid inclusion data of primary inclusions in syn‐ to post‐tectonic vein generations indicate a gradual increase in methane content of the aqueous–gaseous H₂O–CO₂–NaCl–CH₄–N₂ fluid during similar P–T conditions (350–400°C and 2–3.5 kbar). The heterogeneous centimetre‐ to metre‐scale multilayer sequence of quartzites and phyllites has a range of oxygen‐isotope values (8.0–14.1‰ Vienna Standard Mean Ocean Water), which is comparable with the range in the crosscutting quartz veins (10.5–14.7‰ V‐SMOW). Significant differences between oxygen‐isotope values of veins and adjacent host rock (Δ = ?2.8‰ to +4.9‰ V‐SMOW) suggest an absence of host‐rock buffering on a centimetre scale, but based on the similar range of isotope values in the Plougastel Formation, an intraformational buffering and an intermediate‐scale fluid‐flow system could be inferred. The abundance of veins, their well‐distributed and isolated occurrence, and their direct relationship with the progressive deformation suggests that the intermediate‐scale fluid‐flow system primarily occurred in a dynamically generated network of temporarily open fractures.     

A Peaty-debris Flow in Glen Docherty,Wester Ross

Glen Docherty has a long history of debris flow activity along the glen’s north east slope, but in early August 2015 a peaty-debris flow was triggered on the glen’s south west slope, involving an initial slide volume of 190?m³ debris/peat, of which 89?m³ consisted of peat. The flow merited study due to (a) its unusual location relative to debris flow activity affecting the rest of the glen, (b) the volume of peat involved and its effect on flow behaviour, (c) the role of immediate post-debris flow fluvial activity and (d) later responses to the event including subsequent weathering, fluvial activity and the potential for debris flow reactivation.