WHY IS THE MINARET SO SHORT? EVIDENCE FOR EARTHQUAKE DAMAGE ON MT ZION

Abstract

On top of King David's Sepulchre at Mt Zion there is an Ottoman minaret known as al-Nabi Da'ud. Compared with other minarets in Jerusalem, al-Nabi Da'ud seems to be somewhat shorter, and has a squat-like appearance. To track why it is shorter than other minarets, we inspected written historical sources, a sequence of old drawings dated between the mid-eighteenth and mid-nineteenth centuries and analysed the minaret's metric proportions. In drawings dated to and before 1833, the minaret is portrayed much higher than in drawings and photographs dated to and after 1838. Furthermore, comparative height-diameter ratio of various parts of the minaret does not fit those of its counterpart, the al-Qal'a minaret. Thus, we suggest that the minaret was originally built higher but damaged during the 1834 earthquake, and reconstructed to a lower height sometimes afterwards.     

A COMPARATIVE STUDY OF STRENGTHENING AND RETROFITTING MEASURES FOR UNREINFORCED BRICK MASONRY MODEL UNDER CYCLIC TESTING

An experimental study on half-scale brick-masonry models with different strengthening and retrofitting measures has been studied under cyclic loading in a quasi-static test facility. The strengthening measures undertaken for the studies axe the horizontal bond beam at the lintel and sill level with a combination of vertical reinforcement at corners and openings. The retrofitting measures studied are grouting with epoxy-sand-mortar and cement-grout-injection with welded wire mesh in the cracked region. The tests reveal that the horizontal bond beam at lintel level with vertical reinforcement is effective in reducing the cracking above the lintel level. The insertion of an additional sill-band signi-ficantly reduces the cracking in walls. The epoxy-sand-mortar techniques for retrofitting of cracked regions prove to be effective enough to restore the initial strength, stiffness and deformation capacity. Although specimen retrofitted with cement-grout-injection with welded wire mesh is effective to regain the ultimate strength yet the brittle failure is observed as the specimen is stressed beyond the elastic limit.     

徽州古民居(村落)的风水观

本文从风水角度,探讨明清时期徽州古民居在村落规划、建筑设计及营造技术方面,利用和借鉴风水理论,在功能、美学和技术上,形成独特的地方性建筑艺术特色。     

Seismic behavior of two Portuguese adobe buildings: part II —numerical modeling and fragility assessment

Considering the likely unfavorable behavior under seismic action of adobe construction, this article aims at providing a seismic fragility characterization of two adobe Portuguese traditional buildings, using numerical models calibrated over experimental results. The study of such two case-study buildings in the region of Aveiro contributes to the understanding of the seismic fragility of adobe construction in the region in general. The buildings were numerically modeled to estimate their structural behavior under seismic loading using adobe material properties that were calibrated based on the experimental results of a cyclic in-plane test of a full-scale double-Tshaped adobe wall. The method chosen to characterize adobe masonry and model its nonlinear behavior followed a total strain crack-based macro-modeling (TSCM) approach, whereas pushover analysis was carried out to reproduce the pseudo-static experimental test in order to enable a refined calibration of adobe masonry mechanical properties. Fragility functions were then derived, based on the above-mentioned numerical models, using nonlinear static analysis, bringing further insight on the seismic fragility of traditional Portuguese adobe construction.     

An Enhanced Finite Element Macro-Model for the Realistic Simulation of Localized Cracks in Masonry Structures: A Large-Scale Application

ABSTRACT

Finite element macro-modeling approaches are widely used for the analysis of large-scale masonry structures. Despite their efficiency, they still face two important challenges: the realistic representation of damage and a reasonable independency of the numerical results to the used discretization. In this work, the classical smeared crack approach is enhanced with a crack-tracking algorithm, originating from the analysis of localized cracking in quasi-brittle materials. The proposed algorithm is for the first time applied to a large-scale wall exhibiting multiple shear and flexural cracking. Discussion covers structural aspects, as the response of the structure under different assumptions regarding the floor rigidity, but also numerical issues, commonly overlooked in the simulation of large structures, such the mesh-dependency of the numerical results.     

Experimental characterization of the constitutive materials composing an old masonry vaulted tunnel of the Paris subway system

A significant proportion of the Paris metro tunnels comprise a masonry vault built out of stone blocks and mortar joints, and sidewalls and slabs made of unreinforced concrete. In order to provide the necessary data for future structural evaluation, an extensive laboratory testing programme has been conducted to characterize the materials of the tunnel separately, i.e., mortar, stone, and concrete. The tests, carried out on specimens taken from cores extracted from a 1930s tunnel, enabled to determine the mechanical properties, including direct tensile, shear strength, and mode I fracture energy, as well as the properties of the stone-mortar interface. Results show that the masonry mortar joints could reach 10 cm in width, and that blocks of stone varied in composition and porosity, thus producing a wide range of mechanical properties. The concrete was composed of large-sized aggregates and showed low stiffness and strength. Based on these experimental results, ratios between mechanical characteristics are hereby proposed. Perspectives on the use of this experimental data in a finite element model are then discussed.     

Application of Particle Motion Technique to Structural Modal Identification of Heritage Buildings

Determining the behavior of a structure estimated by means of finite elements analysis requires not only an in-depth knowledge of its geometry and dynamic properties but also an experimental validation to corroborate the adequacy of the characteristics of the structure. Most of the current structural identification techniques are based on linear methods that call for many measurement points and/or a relative simple structure. Complex structures are somewhat still an unexplored field due to the difficulties with the finite element method and the experimental corroboration of its results. This study presents the use of particle motion computation applied to each structural vibration mode to improve the identification of its dynamic properties, and its application to the Gothic Cathedral of Palma de Majorca (Spain).     

Analysis of the Out-Of-Plane Seismic Behavior of Unreinforced Masonry: A Literature Review

Although the issue of the out-of-plane response of unreinforced masonry structures under earthquake excitation is well known with consensus among the research community, this issue is simultaneously one of the more complex and most neglected areas on the seismic assessment of existing buildings. Nonetheless, its characterization should be found on the solid knowledge of the phenomenon and on the complete understanding of methodologies currently used to describe it. Based on this assumption, this article presents a general framework on the issue of the out-of-plane performance of unreinforced masonry structures, beginning with a brief introduction to the topic, followed by a compact state of art in which the principal methodologies proposed to assess the out-of-plane behavior of unreinforced masonry structures are presented. Different analytical approaches are presented, namely force and displacement-based, complemented with the presentation of existing numerical tools for the purpose presented above. Moreover, the most relevant experimental campaigns carried out in order to reproduce the phenomenon are reviewed and briefly discussed.     

Assessment of Construction Techniques and Material Usage in İzmir Rural Houses

The domestic architecture in the rural villages of ?zmir comprises a unique built environment with their masonry wall textures, semi-open sofas, round tiled-hipped roofs, and chimneys, and represents an important part of the cultural and architectural heritage. This assessment is mainly based on field observations that focus on the architectural and structural layout of intact, damaged, and destroyed houses. During field observation and the analysis of data certain plan typologies and relationships between the geological formations of the region and choice of materials and construction techniques were observed. While load-bearing masonry and timber skeleton systems are common, extensive use of timber laces, stone, and fired or adobe brick masonry with mud mortar and timber frames infilled with masonry materials were frequently seen. Generally, round timber elements such as wall plates, laces, lintels, posts, and frames of flooring systems are used. Architectural degenerations in authentic houses, defective details and partially due to the earthquake-prone nature of the region seismicity have been evaluated. An overall approach for the preservation and sustainability of this heritage is suggested.     

Damage Assessment of Unreinforced Stone Masonry Buildings After the 2010–2011 Canterbury Earthquakes

The sequence of earthquakes that has affected Christchurch and Canterbury since September 2010 has caused damage to a great number of buildings of all construction types. Following post-event damage surveys performed between April 2011 and June 2011, an inventory of the stone masonry buildings in Christchurch and surrounding areas was carried out in order to assemble a database containing the characteristic features of the building stock, as a basis for studying the vulnerability factors that might have influenced the seismic performance of the stone masonry building stock during the Canterbury earthquake sequence. The damage suffered by unreinforced stone masonry buildings is reported and different types of observed failures are described using a specific survey procedure currently in use in Italy. The observed performance of seismic retrofit interventions applied to stone masonry buildings is also described, as an understanding of the seismic response of these interventions is of fundamental importance for assessing the utility of such strengthening techniques when applied to unreinforced stone masonry structures.