On the homogeneity of fluids forming bedding‐parallel veins

A group of 400–500 m long, bedding‐parallel calcite veins are exposed in the central La Popa Basin of northeastern Mexico. These veins provide a unique opportunity to determine the kilometer‐scale fluid–rock system associated with bedding‐parallel vein formation, and to test for sampling bias in studies that often use one or two samples to constrain the characteristics of regional‐scale paleohydrogeological systems. We use fluid inclusion microthermometry in conjunction with measurements of δ¹³C, δ¹⁸O, and ⁸⁷Sr/⁸⁶Sr ratios to constrain the vein‐forming fluid temperatures, compositions and sources, and compare these values along and between the veins to establish the homogeneity of the vein‐forming fluids and fluid–rock system. The δ¹³C values of the veins are close to those of the host rock, and average – 3.96‰ (PDB). The δ¹⁸O values of the veins are typically 1‰ lower than those of the host rocks, and average – 9.54‰ (PDB). Fluid inclusion homogenization temperatures average 137°C and inclusion salinities are all <6 wt% NaCl equivalent. The ⁸⁷Sr/⁸⁶Sr ratios of the veins average 0.70731 and are substantially lower than the values expected for the host rock. Calculated fluid δ¹⁸O values range from 4 to 10‰ (SMOW). The isotopic and microthermometric data indicate the veins most likely formed at depths of 3–4 km when meteoric water mixed with upward migrating, warm basinal brines. Vein microstructures and field characteristics indicate they formed from multiple slip events that most likely were associated with transport of individual fluid pulses that migrated along bedding planes. The large‐scale homogeneity of vein geochemistry is remarkable and demonstrates that only one or two samples would be sufficient to accurately characterize the kilometer‐scale paleohydrogeological system for these veins.     

Source and character of syntaxial hydrothermal calcite veins in Paleoproterozoic crystalline rocks revealed by fine‐scale investigations

Calcite veins in Paleoproterozoic granitoids on the Baltic Shield are the focus of this study. These veins are distinguished by their monomineralic character, unusual thickness and closeness to Neoproterozoic dolerite dykes and therefore have drawn attention. The aim of this study was to define the source of these veins and to unravel their isotopic and chemical nature by carrying out fine‐scale studies. Seven calcite veins covering a depth interval of 50–420 m below the ground surface and composed of breccias or crack‐sealed fillings typically expressing syntaxial growth were sampled and analysed for a variety of physicochemical variables: homogenization temperature (T_h) and salinity of fluid inclusions, and stable isotopes (⁸⁷Sr/⁸⁶Sr, ¹³C/¹²C, ¹⁸O/¹⁶O), trace‐element concentrations (Fe, Mn, Mg, Sr, rare earth elements) and cathodoluminescence (CL) of the solid phase. The fluid‐inclusion data show that the calcites were precipitated mainly from relatively low‐temperature (T_h = 73–106°C) brines (13.4–24.5 wt.% CaCl₂), and the ⁸⁷Sr/⁸⁶Sr is more radiogenic than expected for Rb‐poor minerals precipitated from Neoproterozoic fluids. These features, together with the distribution of δ¹³C and δ¹⁸O values, provide evidence that the calcite veins are not genetic with the nearby Neoproterozoic dolerite dykes, but are of Paleozoic age and were precipitated from warm brines expressing a rather large variability in salinity. Whereas the isotopic and chemical variables express rather constant average values among the individual veins, they vary considerably on fine‐scale across individual veins. This has implications for understanding processes causing calcite‐rich veins to form and capture trace metals in crystalline bedrock settings.     

Numerical simulation of mylonitization and structural controls on fluid flow and mineralization of the Hetai gold deposit,west Guangdong,China

The Hetai gold deposit (HGD) is a typical altered mylonite type gold mine in a ductile shear zone in western Guangdong, China. Geomechanical simulations of the HGD were carried out in this paper to examine the importance of the dilation‐driven fluid circulation in gold mineralization. The results show that three evenly‐spaced NNE shear zones of enhanced dilation are produced in the study area. The calculated principal compressive stress in the X direction in these zones ranges between ?420 and ?650 MPa, in line with estimates of ore‐forming pressure (fluid pressure). Ore forming fluid is focused into these features, as observed in the field. The calculated differential stress decreases from 275~350 to 148~225 MPa during the formation of mylonite zones. These, together with geological structural analysis and fluid pressure measurements, indicate that the mylonitization zone can provide a place of fluid focusing and a favorable environment for gold mineralization.     

Origin of palaeo‐waters in the Ordovician carbonates in Tahe oilfield,Tarim Basin: constraints from fluid inclusions and Sr,C and O isotopes

Petrographic features, isotopes, and trace elements were determined, and fluid inclusions were analyzed on fracture‐filling, karst‐filling and interparticle calcite cement from the Ordovician carbonates in Tahe oilfield, Tarim basin, NW China. The aim was to assess the origin and evolution of palaeo‐waters in the carbonates. The initial water was seawater diluted by meteoric water, as indicated by bright cathodoluminescence (CL) in low‐temperature calcite. The palaeoseawater was further buried to temperatures from 57 to 110°C, nonluminescent calcite precipitated during the Silurian to middle Devonian. Infiltration of meteoric water of late Devonian age into the carbonate rocks was recorded in the first generation of fracture‐ and karst‐filling dull red CL calcite with temperatures from <50°C to 83°C, low salinities (<9.0 wt%), high Mn contents and high ⁸⁶Sr/⁸⁷Sr ratios from 0.7090 to 0.7099. During the early Permian, ⁸⁷Sr‐rich hydrothermal water may have entered the carbonate rocks, from which precipitated a second generation of fracture‐filling and interparticle calcite and barite cements with salinities greater than 22.4 wt%, and temperatures from 120°C to 180°C. The hydrothermal water may have collected isotopically light CO₂ (possibly of TSR‐origin) during upward migration, resulting in hydrothermal calcite and the present‐day oilfield water having δ¹³C values from ?4.3 to ?13.8‰ and showing negative relationships of ⁸⁷Sr/⁸⁶Sr ratios to δ¹³C and δ¹⁸O values. However, higher temperatures (up to 187°C) and much lower salinities (down to 0.5 wt%) measured from some karst‐filling, giant, nonluminescent calcite crystals may suggest that hydrothermal water was deeply recycled, reduced (Fe‐bearing) meteoric water heated in deeper strata, or water generated from TSR during hydrothermal water activity. Mixing of hydrothermal and local basinal water (or diagenetically altered connate water) with meteoric waters of late Permian age and/or later may have resulted in large variations in salinity of the present oilfield waters with the lowest salinity formation waters in the palaeohighs.     

Hydrothermal palaeofluid circulation in the fracture network of the Baksa Gneiss Complex of SW Pannonian Basin,Hungary

A well‐developed fracture‐filling network is filled by dominantly Ca‐Al‐silicate minerals that can be found in the polymetamorphic rock body of the Baksa Gneiss Complex (SW Hungary). Detailed investigation of this vein network revealed a characteristic diopside→epidote→sphalerite→albite ± kfeldspar→chlorite1 ± prehnite ± adularia→chlorite2→chlorite3→pyrite→calcite1→calcite2→calcite3 fracture‐filling mineral succession. Thermobarometric calculations (two feldspar: 230–336°C; chlorites: approximately 130–300°C) indicate low‐temperature vein formation conditions. The relative succession of chlorites in the mineral sequence combined with the calculated formation temperatures reveals a cooling trend during precipitation of the different chlorite phases (T_chlorite1: 260 ± 32°C →T_chlorite2: 222 ± 20°C →T_chlorite3: 154 ± 13°C). This cooling trend can be supported by the microthermometry data of primary fluid inclusions in diopside (T_h: 276–362°C) and epidote (T_h: 181–359°C) phases. The identical chemical character (0.2–1.5 eq. wt% NaCl) of these inclusions mean that vein mineralization occurred in a same fluid environment. The high trace element content (e.g. As, Cu, Zn, Mn) and Co/Ni ratio approximately 1–5 of pyrite grains support the postmagmatic hydrothermal origin of the veins. The vein microstructure and identical fluid composition indicate that vein mineralization occurred in an interconnected fracture system where crystals grew in fluid filled cracks. Vein system formed at approximately <200 MPa pressure conditions during cooling from approximately 480°C to around 150°C. The rather different fluid characteristics (T_h: 75–124°C; 17.5–22.6 eq. wt% CaCl₂) of primary inclusions of calcite1 combining with the special δ¹⁸O signature of fluid from which this mineral phase precipitated refer to hydrological connection between the crystalline basement and the sedimentary cover.     

Indications of formation water flow and compartmentalization on the flank of a salt structure derived from salinity and seismic data

Vertical and lateral variations in lithology, salinity, temperature, and pressure determined from wireline LAS logs, produced water samples, and seismic data on the south flank of a salt structure on the continental shelf, offshore Louisiana indicate three hydrogeologic zones in the study area: a shallow region from 0 to 1.1 km depth with hydrostatically pressured, shale‐dominated Pleistocene age sediments containing pore waters with sea water (35 g l^?1) or slightly above sea water salinity; a middle region from 1.1 to 3.2 km depth with near hydrostatically pressured, sand‐dominated Pliocene age sediments that contain pore waters that range from seawater salinity to up to 5 times sea water salinity (180 g l^?1); and a deep section below 3.2 km depth with geopressured, shale‐dominated Miocene age sediments containing pore waters that range from sea water salinity to 125 g l^?1. Salt dissolution has generated dense, saline waters that appear to be migrating down dip preferentially through the thick Pliocene sandy section. Sand layers that come in contact with salt contain pore waters with high salinity. Isolated sands have near sea water salinity. Salinity information in conjunction with seismic data is used to infer fluid compartmentalization. Both vertical and lateral lithologic barriers to fluid flow at tens to hundreds of meters scale are observed. Fluid compartmentalization is also evident across a supradomal normal fault. Offset of salinity contours are consistent with the throw of the fault, which suggests that saline fluids migrated before fault formation.     

On the flow characteristics of the conical Minoan pipes used in water supply systems,via computational fluid dynamics simulations

The Minoan Terracotta pipes with their conical shape were widely used in the water distribution system in the ancient Minoan civilization. They remain one of the brightest achievements of the Minoan tribe in water supply technology and raise admiration as well as many questions about the technological advancements of antiquity, that are yet to be understood. The present work aims at answering the following questions: a) what inspired the Minoans to manufacture pipes with such a peculiar shape, that differs greatly not only from later pipe designs of antiquity, but also from contemporary cylindrical pipes and b) why was the design of those pipes abandoned after the fall of the Minoan civilization? It tries to address these questions by investigating the flow physics and dynamics that take place in such pipes, adopting advanced numerical and computational methods. The time-averaged Navier–Stokes equations along with the k − ? turbulence model are solved for a variety of geometrical parameters, pipe orientations and flow rates, in order to produce a comparative picture of the hydraulic efficiency of the conical Minoan pipes. The flow field is visualized and critical flow parameters, such as the head loss, the velocity magnitude and turbulence intensity, are calculated. These calculations show clearly that the conical Minoan pipes exhibit significantly higher pressure drops along their length compared to an equivalent straight pipe. In their widest part an extended recirculation appears, which could wash out impurities that may be present in the water, which at the same time cannot be deposited on the pipe wall. This evidence proves that the Minoan pipes are energetically expensive to operate and consequently their replacing by cylindrical pipes was inevitable. Therefore, it seems that the main advantage and purpose of the particular geometry was that they could be easily connected on site, forming long straight or slowly bending lines without having to add straight or many different fittings in between.     

Evolution of porosity, permeability and fluid pressure in dilatant faults post-failure: implications for fluid flow and mineralization

Mineralization of brittle fault zones is associated with sudden dilation, and the corresponding changes in porosity, permeability and fluid pressure, that occur during fault slip events. The resulting fluid pressure gradients cause fluid to flow into and along the fault until it is sealed. The volume of fluid that can pass through the deforming region depends on the degree of dilation, the porosity and permeability of the fault and wall rocks, and the rate of fault sealing. A numerical model representing a steep fault cutting through a horizontal seal is used to investigate patterns of fluid flow following a dilatant fault slip event. The model is initialized with porosity, permeability and fluid pressure representing the static mechanical state of the system immediately after such an event. Fault sealing is represented by a specified evolution of porosity, coupled to changes in permeability and fluid pressure, with the rate of porosity reduction being constrained by independent estimates of the rate of fault sealing by pressure solution. The general pattern of fluid flow predicted by the model is of initial flow into the fault from all directions, followed by upward flow driven by overpressure beneath the seal. The integrated fluid flux through the fault after a single failure event is insufficient to account for observed mineralization in faults; mineralization would require multiple fault slip events. Downward flow is predicted if the wall rocks below the seal are less permeable than those above. This phenomenon could at least partially explain the occurrence of uranium deposits in reactivated basement faults that cross an unconformity between relatively impermeable basement and overlying sedimentary rocks.     

A vector of high‐temperature paleo‐fluid flow deduced from mass transfer across permeability barriers (quartz veins)

Quartz veins acted as impermeable barriers to regional fluid flow and not as fluid‐flow conduits in Mesoproterozoic rocks of the Mt Painter Block, South Australia. Systematically distributed asymmetric alteration selvedges consisting of a muscovite‐rich zone paired with a biotite‐rich zone are centered on quartz veins in quartz–muscovite–biotite schist. Geometric analysis of the orientation and facing of 126 veins at Nooldoonooldoona Waterhole reveals a single direction along which a maximum of all veins have a muscovite‐rich side, irrespective of their specific individual orientation. This direction represents a Mesoproterozoic fluid‐flow vector and the veins represent permeability barriers to the flow. The pale muscovite‐rich zones formed on the downstream side of the vein and the dark biotite‐rich zones mark the upstream side. The alteration couplets formed from mica schist at constant Zr, Ga, Sc, and involved increases in Si, Na, Al and decreases in K, Fe, Mg for pale alteration zones, and inverse alteration within dark zones. The asymmetry of the alteration couplets is best explained by the pressure dependence of mineral–fluid equilibria. These equilibria, in combination with a Darcian flow model for coupled advection and diffusion, and with permeability barriers imposed by the quartz veins, simulate the pattern of both fluid flow and differential, asymmetric metasomatism. The determined vector of fluid flow lies along the regional foliation and is consistent with the known distribution of regional alteration products. The presence of asymmetric alteration zones in rock containing abundant pre‐alteration veins suggests that vein‐rich material may have generally retarded regional fluid flow.     

Reconstruction of palaeo-burial history and pore fluid pressure in foothill areas: a sensitivity test in the Hammam Zriba (Tunisia) and Koh-i-Maran (Pakistan) ore deposits

The burial and pore fluid pressure history of fluorite ore deposits is reconstructed: (i) at Hammam Zriba–Djebel Guebli along the eastern margin of the Tunisian Atlas; and (ii) at Koh‐i‐Maran within the northern part of the Kirthar Range in Pakistan. Both the deposits are hosted by Late Jurassic carbonate reservoirs, unconformably overlain by Late Cretaceous seals. Microthermometric analyses on aqueous and petroleum fluid inclusions with pressure–volume–temperature–composition (PVTX) modeling of hydrocarbon fluid isochores are integrated with kinematics and thermal 2D basin modeling in order to determine the age of mineralization. The results suggest a Cenozoic age for the fluorite mineralization and a dual fluid migration model for both ore deposits. The PVTX modeling indicates that the initial stage of fluorite cementation at Hammam Zriba occurred under fluid pressures of 115 ± 5 bars and at a temperature close to 130°C. At Koh‐i‐Maran, the F3 geodic fluorite mineralization developed under hydrostatic pressures of 200 ± 10 bars, and at temperatures of 125–130°C. The late increase in temperature recorded in the F3 fluorites can be accounted for by rapid rise of hotter fluids (up to 190°C) along open fractures, resulting from hydraulic fracturing of overpressured sedimentary layers.