Wavelength‐dispersive X‐ray fluorescence analysis of ancient glasses*

The application of X‐ray fluorescence to the study of the composition of ancient glasses has been limited by the large amount of material required for samples. In this paper the setting of a reduced sampling XRF method for the analysis of ancient glasses is described. The method involves the preparation of glass beads by melting the sample with lithium tetraborate flux. By means of reference and synthetic samples, the method allows regression curves to be set, covering broad ranges from ppm to high concentrations. By means of a single program, up to 31 elements of interest in the study of ancient glass are analysed. The reproducibility, sensitivity and reliability of the method are discussed. The results demonstrate that 0.2 g of glass is sufficient to obtain accurate and sensitive analyses for most of the elements of interest.     

Fuel Management (Bone and Wood) During the Lower Aurignacian in the Pataud Rock Shelter (Lower Palaeolithic, Les Eyzies de Tayac, Dordogne, France). Contribution of Experimentation

The use of bone as fuel during the lower Aurignacian in the Pataud rock shelter was studied. An anterior study allowed us to dismiss the hypothesis of an imbalance between wood availability and the use of bone as fuel. An experimental study of bone combustion shows the specific properties of bone as fuel. We have proposed that the combustion of a mixture of material (wood and bone) is more effective as source of heat than the combustion of wood alone and the higher the proportion of bone the longer the combustion lasts. Lastly, we observed that the combustion of bone favours two kinds of heat transfer: radiation and convection, but that it is completely ineffective for conduction. The results show that the use of bone could result from an intentional management of fuel in relation with the function of the settlement. It also could be a response to the disadvantage of using wood in a Palaeolithic camp.     

CONIFEROUS WOOD PULP IN TRADITIONAL KOREAN PAPER BETWEEN THE 15TH AND 18TH CENTURIES ad*

One hundred and sixty‐nine fibre samples from books in the Korean collection and 68 samples from books in the Japanese collection at the British Library were analysed. A further 15 samples of Korean paper from a private collection were also examined. The analysis confirmed that most of the papers contained mulberry species (Moraceae family) as the main papermaking material, and other materials, such as hemp, rice straw and reed, which have been commonly known as supplements to traditional Korean papermaking. However, 15 Korean papers and one Japanese paper dating between ad 1498 and 1798 appeared to include coniferous wood fibres. This substantial find supports a previous single find of a coniferous wood fibre in Korean paper. The dates of most of these papers containing wood fibres precede the use of wood pulps in European paper.     

CHEMICAL CHARACTERIZATION OF TIN‐LEAD GLAZED POTTERY FROM THE IBERIAN PENINSULA AND THE CANARY ISLANDS: INITIAL STEPS TOWARD A BETTER UNDERSTANDING OF SPANISH COLONIAL POTTERY IN THE AMERICAS*

Majolica pottery was the most characteristic tableware produced in Europe during the Medieval and Renaissance periods. Because of the prestige and importance attributed to this ware, Spanish majolica was imported in vast quantities into the Americas during the Spanish Colonial period. A study of Spanish majolica was conducted on a set of 186 samples from the 10 primary majolica production centres on the Iberian Peninsula and 22 sherds from two early colonial archaeological sites on the Canary Islands. The samples were analysed by neutron activation analysis (NAA), and the resulting data were interpreted using an array of multivariate statistical approaches. Our results show a clear discrimination between different production centres, allowing a reliable provenance attribution of the sherds from the Canary Islands.     

MATHEMATICS,STATISTICS AND ARCHAEOMETRY: THE PAST 50 YEARS OR SO*

This review of developments in the use of mathematics and statistics in archaeometry over the past 50 years is partial, personal and ‘broad‐brush’. The view is expressed that it is in the past 30 years or so that the major developments have taken place. The view is also expressed that, with the exception of methods for analysing radiocarbon dates and increased computational power, mathematical and statistical methods that are currently used, and found to be useful in widespread areas of application such as provenance studies, don't differ fundamentally from what was being done 30 years ago.     

COMPOSITIONAL VARIATIONS IN AGED AND HEATED PISTACIA RESIN FOUND IN LATE BRONZE AGE CANAANITE AMPHORAE AND BOWLS FROM AMARNA,EGYPT*

This study examines resinous deposits from the interior surfaces of sherds of imported Canaanite amphorae and locally produced bowls from the 18th Dynasty site of Tell el‐Amarna, Egypt. Archaeological evidence indicates that the Canaanite amphorae were used for resin transport, whilst the bowls are associated with burning resin as incense. A number of characteristic triterpenoids identify all the resinous deposits from both vessel types as Pistacia spp. No other resins were observed and there was no evidence of mixing with oils or fats. The composition of the archaeological resins is more complex than that of modern pistacia resin, due to degradation and generation of new components. Experimental heating alters the relative abundance of the triterpenoid composition of modern pistacia resin. One component, the triterpenoid 28‐norolean‐17‐en‐3‐one, is produced by such heating; however, an increase in its relative abundance in ancient samples is not matched by the archaeological evidence for heating. It is therefore not possible to use this component reliably to identify heated resin. However, additional unidentified components with a mass spectral base peak at m/z 453 have been associated with seven (out of 10) bowls and are not observed in resins associated with Canaanite amphorae. It is proposed that these components are more reliable molecular indicators of heating.     

DETECTING MULTIVARIATE OUTLIERS IN ARTEFACT COMPOSITIONAL DATA*

Multivariate statistical analysis of artefact compositional data, usually undertaken to investigate structure in the data, often incidentally reveals the presence of multivariate outliers. Much statistical methodology dealing with the detection of such outliers is not well suited to archaeometric data that, in the event, consist of two or more groups. The paper provides examples to illustrate the importance of detecting and dealing with outliers, and critically examines a range of different approaches to outlier detection. The examples show that cluster analysis, the technique most widely used for this purpose, can fail to reveal outliers clearly identified by other methods.     

STEEL FILES AS CHRONOLOGICAL MARKERS IN NORTH AMERICAN FUR TRADE SITES*

A selection of fragments of steel files excavated from dated western Canadian fur trade sites has been examined metallographically to assess their value as chronological indicators. It was possible in some, but not all, cases to identify the steelmaking process, distinguishing between cementation steel and crucible steel. In other file fragments manganese was detected in the steel both as manganese sulphide inclusions and in solution in the steel matrix. The identification of crucible steel provides a terminus post quem of 1740 for the fragment, and the presence of manganese a terminus post quem of about 1840. The site occupation dates were consistent with the dates deduced from the steelmaking technologies.     

A COMPARATIVE ELECTRON MICROPROBE STUDY OF LERNA III AND IV CERAMICS AND LOCAL CLAY-RICH SEDIMENTS*

This study uses electron microprobe analysis of ceramic artefacts and local day-rich sediments and lithics to help address questions concerning the nature of the cultural change implied by ceramics from Lerna III and IV. It redresses the previous lack of a comparative collection of clay-rich sediments that adequately represents the local variation in clay and temper for the area surrounding Lerna. The resulting comparisons indicate that although they produced stylistically different ceramics, potters from both Lenta phases acquired their clays from the local Lerna area.     

IN VITRO DECOMPOSITION OF BONE COLLAGEN BY SOIL BACTERIA: THE IMPLICATIONS FOR STABLE ISOTOPE ANALYSIS IN ARCHAEOMETRY*

To understand biogenic collagen type I decomposition and to establish how diagenesis may bias archaeometric data, modern mammalian bone was inoculated with a selection of ubiquitous soil bacteria. The presence of exogenous microbial biomass in the inoculated specimens was then checked microscopically prior to collagen extraction. The experimentally degraded bone collagen showed altered amino acid compositions, attributable to the selective breakdown of certain amino acids by the bacteria. While both the bulk collagen extract and the single amino acids exhibited shifts to more negative δ¹³ C-values, enrichment was recorded for general δ¹³ N, and a depletion trend relative to unaltered collagen was observed for individual amino acid δ¹³ N. One explanation for the enrichment of the global δ¹⁵N-values is cleavage of peptide bonds, which leaves ¹⁵ N within the substrate, while the change of ¹³C is mostly due to the altered amino acid composition. On the other hand, possible repolymerization of cleavage products under experimental conditions may also be responsible for the depletion trend of individual amino acid δ¹³C- and δ¹⁵ N-values. This paper discusses the results as a basis for the development of a method for the reconstruction of the isotopic abundance of the original collagen, using the amino acid composition of the degraded product, the contribution of individual amino acids to its global δ-values and of isotope discriminations implied in the microbial decomposition.