A MICRO‐RAMAN AND INTERNAL MICROSTRATIGRAPHIC STUDY OF CERAMIC SHERDS FROM THE KILNS OF THE MEDICI CASTLE AT CAFAGGIOLO*

Nine representative sherds from the old (14th–16th century) kilns at the Castle of Cafaggiolo in Tuscany have been analysed by means of internal microstratigraphic analyses and micro‐Raman spectroscopy and classified as follows: six engobed and glazed fragments, of which three are covered with an opaque white, decorated layer, one is marbleized, and two are engobed. The surface of the two engobed sherds, fragments of unfinished products, indicates that at least two firing processes were used. Two samples show characteristics of Byzantine pottery, and three of them can be classified as Islamic ware or maiolica, whilst the other one displays intermediate characteristics. The variety of ceramic wares indicates the presence of craftsmen with differing expertise, and suggests that part of their work was dedicated to experimentation on new ceramic production techniques.     

THE APPLICATION OF A PORTABLE X‐RAY FLUORESCENCE SPECTROMETER TO THE ON‐SITE ANALYSIS OF GLASS VESSEL FRAGMENTS FROM SOUTHERN THAILAND*

Ancient glass vessel fragments belonging to the seventh to ninth centuries ad , from the Ko Kho Khao, Laem Pho and Khuan Lukpad sites in southern Thailand, were studied. The glass vessel fragment samples are a collection belonging to the Department of Archaeology, the 15th Regional Office of Fine Arts of Thailand. The chemical compositions of the glasses were analysed using a modified portable energy‐dispersive X‐ray fluorescence spectrometer (OURSTEX 100FA‐II) by the introduction of a MOXTEK^® AP3.3 polymer window (5 mm²?) to the KETEK silicon drift detector for the measurement of light elements. The non‐destructive analysis was performed at the National Museum, Phuket, in Thailand. It is shown that the glass chemical compositions belong to mineral and plant‐ash based soda–lime–silicate glass. The origins of the glass artefacts are discussed in terms of raw materials and glass decoration, and compared with previously reported similar typological glasses from sites in the port city of Rāya and the Monastery of Wadi al‐Tur in Egypt.     

APPLICATION OF LEAD ISOTOPE ANALYSIS TO A WIDE RANGE OF LATE BRONZE AGE EGYPTIAN MATERIALS*

Lead isotope analysis was applied to Egyptian materials from the Late Bronze Age in order to investigate the relationship between these different materials, many of which have lead as a significant component. The galena kohls analysed can be provenanced to Gebel Zeit, a large mining site known to have been active during the period. However, the source of lead metal is different and seems to be outside Egypt, along with the source of copper. Lead‐based pigments such as lead antimonate that were used in glass and glazes seem mostly to come from Egypt, although they may well contain a component of ‘Mesopotamian’ lead. In the Predynastic period, galena from many sources is being exploited for use as kohl. However, by the Middle Kingdom (2055–1650 bc ), extraction has concentrated on one source, Gebel Zeit, perhaps reflecting increasingly centralized control and/or the use of large‐scale exploitation. It therefore appears that a complex pattern of trade in lead‐based materials was evident, with lead metal and galena being separate commodities from separate sources and treated as such.     

LOG‐RATIO COMPOSITIONAL DATA ANALYSIS IN ARCHAEOMETRY*

Compositional data arise commonly in archaeometry, in the study of artefact compositions where the variables measured either sum to 100%, or can be viewed as a subset of such a set of variables. There has been debate in Archaeometry about the appropriate way to analyse such data statistically, which amounts to argument about how the data should be transformed prior to statistical analysis. This paper reviews aspects of the debate and illustrates, using both simulated and real data, that what has been proposed as the ‘correct’ theoretical approach—log‐ratio analysis—does not always work well. The reasons for this are discussed.     

PHYSICOCHEMICAL COMPOSITIONAL ANALYSIS OF CERAMICS: A CASE STUDY IN KENTING,TAIWAN*

The composition of ceramics does not just reflect the component of some specific, unprocessed, geological, raw material source, but also certain forms of human behaviour involved in its manufacture. The purpose of this research project is to apply the acid‐extraction chemical method, complemented by a thin‐section petrographic study, to the compositional analyses of certain local ceramic collections (mainly from several sites in the southern Taiwan area). The results present the raw materials that the ceramic manufacturers of the two cultural traditions (O‐laun‐pi Phase II and Phase III–IV), which overlapped temporally, used. These materials came from the same sources, but the ceramics were manufactured in different ways. Particularly, the people of O‐laun‐pi Phase III–IV also procured certain materials from either local sources or from somewhere in eastern Taiwan to make their pots. The results also indicate that there might have been a variation in terms of their manufacture among sites of the same cultural tradition.     

SAND FOR ROMAN GLASS PRODUCTION: AN EXPERIMENTAL AND PHILOLOGICAL STUDY ON SOURCE OF SUPPLY*

This paper reports the results of an experimental study performed on Campanian littoral sand, together with a careful philological analysis of Pliny's text concerning the production of glass using the above sand in order to verify its suitability. Accurate chemical and mineralogical characterization of sand samples and experimental glasses was carried out, proving the unsuitability of sand for glass production in its original state. Taking into account both the results of the philological analysis of Pliny's text and the mineralogical assemblage of the sand, a new hypothesis regarding Roman glass‐making technology is proposed and tested here. The technology implies the production of ‘quartz‐enriched’ sand by means of selective grindings according to the different degrees of hardness and cleavage of the mineralogical phases. Melting experiments, carried out on treated sand and in the temperature range compatible with Roman technology, yielded a glass with composition similar to those of typical Roman glasses. Therefore, new perspectives on the sources of supply of raw materials, hitherto debated, are opened up.     

EFFECTS OF DIFFERENT SAMPLE PREPARATION METHODS ON STABLE CARBON AND OXYGEN ISOTOPE VALUES OF BONE APATITE: A COMPARISON OF TWO TREATMENT PROTOCOLS*

Researchers have long debated the appropriateness of stable isotope analysis of bone apatite to reconstruct the diets of ancient animals. The debate has centred, in part, on diagenesis of bone mineral from interaction with the burial environment. A number of acetic acid treatments are used to remove diagenetic carbonates from samples; however, less is known on how different protocols alter stable isotope values. We compare two common acetic acid solution treatments (0.1 M versus 1.0 M-buffered) to examine the effects on carbon and oxygen isotope values and Fourier transform infrared spectroscopy (FTIR) spectra in human bone from different burial contexts. Results indicate that both treatments have a similar effect on isotope values and FTIR spectra in bone apatite.     

LUSTRE-DECORATED CERAMICS FROM A 15TH TO 16TH CENTURY PRODUCTION IN SEVILLE*

A set of 17 fragments of ceramics have been uncovered on the occasion of excavations of a workshop in Triana near Seville. These ceramics are typical of objects that are not commonly encountered in present collections in spite of intensive production during the 15th–16th centuries. Chemical and mineralogical analyses have been performed using various techniques (X-ray fluorescence and diffraction, SEM, ion beam analyses). The majority of the ceramic sherds represent the diversity of the Seville production; three fragments recovered in the same archaeological context were not locally produced and belong to the production of eastern Spain (Valence area). The ceramic bodies of the Seville sherds are compatible with the use of clays from the Guadalquivir valley. The glaze and the lustre decoration are comparable to those produced in eastern Spain. These conclusions are based on data that represent the production of a single workshop in Seville; the scatter of the data is due to variations in the processing and/or to alterations during the five centuries of burial of the ceramic fragments.     

PROVENANCE OF MARBLES FROM NAXOS BASED ON MICROSTRUCTURAL AND GEOCHEMICAL CHARACTERIZATION

A detailed quantitative microstructural study coupled with cathodoluminescence and geochemical analyses on marbles from Naxos demonstrates that the analysis of microstructures is the most sensitive method to define the origin of marbles within, and between, different regions. Microstructure examination can only be used as an accurate provenance tool if a correction for the second‐phase content is considered. If second phases are not considered, a large spread of different microstructures occurs within sample sites, making a separation between neighbouring outcrops difficult or impossible. Moreover, this study shows that the origin of a marble is defined more precisely if the microstructural observations are coupled with cathodoluminescence data.     

THE SECTILIA PANELS OF FARAGOLA (ASCOLI SATRIANO,SOUTHERN ITALY): A MULTI‐ANALYTICAL STUDY OF THE GREEN,MARBLED (GREEN AND YELLOW), BLUE AND BLACKISH GLASS SLABS

Analyses at the Cu–K, Fe–K and Mn–K edge were performed to study the green, marbled (green and yellow), blue and blackish (deep greyish olive green) glass slabs decorating three sectilia panels from the archaeological site of Faragola. Results indicate that all slabs were made by mixing siliceous sand with natron, sometimes probably mixed with small percentages of plant ash. Cu²⁺ and Pb antimonates should be responsible for the opaque green colours. The dark green and yellow portions of the marbled slabs are respectively comparable to the slabs comprising only one of these colours. Cu²⁺ together with Ca antimonates probably produced light blue slabs, whereas cobalt was used to produce dark blue slabs. We consider it possible that the abundance ratio of Fe²⁺/Fe³⁺ and the complex Fe³⁺S^2? would have an effect on the blackish slabs. The contribution of Mn cannot be ascertained even if it could have played a role in darkening glass colour. The comparison between the chemical composition of Faragola samples and several glass reference groups provided no conclusive evidence of provenance; whereas, the presence of a secondary local workshop can be hypothesized.