Site Classification Assessment for Estimating Empirical Attenuation Relationships for Central-Northern Italy Earthquakes

The aim of this article is to investigate the ground motion attenuation of the most industrialized and populated regions of Italy, evaluating the capability of different approaches to estimate site dependent models. The 5.2 local magnitude earthquake on November 24, 2004 shocked the areas of Northern Italy producing damage of about 215 million euros. The data set, including 243 earthquakes of local magnitude up to 5.2, has been collected in the period December 2002–October 2005 by 30 three-component seismic stations managed by Istituto Nazionale di Geofisica e Vulcanologia, Sezione di Milano (INGV-MI). Empirical attenuation relationships have been estimated for horizontal peak ground velocity (PGHV), acceleration (PGHA), displacement (PGHD), and for response spectral acceleration (SA) for periods between 0.1 and 1.5 s. To estimate suitable attenuation models, in particular for sites characterized by thick sedimentary geological formations, a soil discrimination based on EU8 code can lead to wrong evaluations. On the contrary, a classification based on H/V spectral ratios of seismic ambient noise (NHV) allows the models to fit better real and predicted data and to reduce the uncertainties of the process. For each receiver, NHV have been strengthened by additional H/V spectral ratio of earthquake data (EHV), calculated considering different portions of the analysed signals. In order to validate the PGHA attenuation relationship for greater magnitudes, accelerometric records, relative to Central-Northern Italy strong motions occurring in the last 30 years, have been collected and superimposed to our attenuation curves.     

Seismic Design of MRF-EBF Dual Systems with Vertical Links: EC8 vs Plastic Design

Despite the fact that Eccentrically Braced Frames with Vertical Links (VL-EBFs), also referred to as inverted Y-scheme, are codified in Eurocode 8, the issues related to their seismic response and design have not been widely investigated, so that design criteria commonly applied for Eccentrically Braced Frames with Horizontal Links (HL-EBFs) are commonly applied. However, the Theory of Plastic Mechanism Control (TPMC) has been recently extended to the case of VL-EBFs. The aims of this article, on one hand, are to provide a further validation of the recently proposed design procedure, based on TPMC, and, on the other hand, are to compare the seismic performance of dual systems composed by a moment-resisting part and VL-EBF part designed by means of TPMC with those occurring when Eurocode 8 design criteria are applied. The validation of the proposed design procedure is carried out by means of Incremental Dynamic Analyses (IDA). The main purpose of such analyses is the check of the fulfilment of the design goal of TPMC, i.e., the development of a pattern of yielding consistent with the collapse mechanism of global type. Such mechanism is universally recognized as the one leading to the highest energy dissipation capacity. In case of MRF-EBF dual systems, it is characterized by the yielding of all the links and all the beams at their ends. Conversely, all the columns and the diagonal braces remain in elastic range. Obviously, exception is made for the base sections of first story columns. In particular, two case studies are analyzed which are characterized by a different number of stories. Each building structure is designed according to both TPMC and Eurocode 8 provisions. The seismic response obtained is investigated by both push-over and IDA analyses. The attention is focused on the pattern of yielding obtained, the maximum interstory drift demand, the link plastic rotation demand and sharing of the seismic base shear between the moment-resisting part and the bracing part of the structural system. The results obtained point out improvement of the seismic response, compared to Eurocode 8 provisions, achieved by means of TPMC.     

New Data on the Exploitation of Obsidian in the Southern Caucasus (Armenia,Georgia) and Eastern Turkey,Part 2: Obsidian Procurement from the Upper Palaeolithic to the Late Bronze Age

Within the framework of the French archaeological mission ‘Caucasus’, in a previous paper we have presented new geochemical analyses on geological obsidians from the southern Caucasus (Armenia, Georgia) and eastern Turkey. We present here the second part of this research, which deals with provenance studies of archaeological obsidians from Armenia. These new data enhance our knowledge of obsidian exploitation over a period of more than 14 000 years, from the Upper Palaeolithic to the Late Bronze Age. The proposed methodology shows that source attribution can be easily made by plotting element contents and element ratios on three simple binary diagrams. The same diagrams were used for source discrimination. As the southern Caucasus is a mountainous region for which the factor of distance as the crow flies cannot be applied, we have explored the capacity of the Geographic Information System to evaluate the nature and patterns of travel costs between the sources of obsidian and the archaeological sites. The role of the secondary obsidian deposits, which enabled the populations to acquire raw material at a considerable distance from the outcrops, is also considered.     

A Probability-based Approach for the Definition of the Expected Seismic Damage Evaluated with Non-linear Time-History Analyses

The seismic damage evaluated through Nonlinear Time-History Analyses is significantly affected by the response quantity chosen to represent the seismic responses. Starting from the theory of tolerance regions, a generic upper limit of the seismic responses is proposed. The method is applied to a reinforced concrete structure subjected to different record combinations. For each considered damage index and record combination, the upper limit damage is compared with the average value suggested by seismic codes. The proposed method yields a higher seismic damage than the average response and an increase in the damage indices as the number of records decreases.     

A Single-Run Dynamic-Based Approach for Pushover Analysis of Structures Subjected to Near-Fault Pulse-Like Ground Motions

In this paper, a fairly effective procedure called dynamic load pattern (DLP), is proposed to account for the effects of near-fault ground motions in estimating the seismic demands of structures from pushover analyses. The seismic demands are obtained by enveloping the results of single-run conventional first-mode and single-run DLP pushover analyses. Improving the estimation of target displacement is another objective, implemented by performing response-spectrum analysis. Three special steel moment-resisting frames are considered and the seismic demands resulting from DLP are compared to those from the nonlinear time-history analysis as a benchmark solution, as well as to those predicted from modal pushover analysis.     

Sulfur and iron analyses of marine archaeological wood in shipwrecks from the Baltic Sea and Scandinavian waters

Analyses of marine archaeological wood from shipwrecks in the Baltic Sea area, Kronan, Riksnyckeln, Tattran, the Puck Bay Boat and the Ghost wreck, and at the Scandinavian West coast, the Göta wreck, Stora Sofia and the Viking shipwrecks of Skuldelev, show accumulation of sulfur compounds. The penetration profiles of sulfur and iron into the wood and the speciation of characteristic sulfur groups were evaluated by combining X-ray spectroscopic analyses, in particular S K-edge XANES (X-ray absorption near edge structure) and X-ray fluorescence, with ESCA and elemental analyses. The combined analyses support the hypothesis that hydrogen sulfide produced by sulfate-reducing bacteria reacts and accumulates at low iron concentration mainly as organically bound sulfur, which as in previous studies was found by X-ray spectro-microscopy to accumulate in lignin-rich parts of the wood cell walls. The presence of iron(II) ions from corroding iron promotes formation of pyrite and other iron(II) sulfides, which easily oxidise in aerobic conditions with high humidity. No significant differences in sulfur and iron accumulation were found in wood from shipwrecks in the east coast brackish water and the west coast seawater. Sediments from three wreck sites, the Göta wreck, Stora Sofia and Kronan, were analyzed to a depth of a few decimeters and showed especially at the Stora Sofia high sulfur concentrations, exceeding 3 mass%. S K-edge XANES analyses of the sediments showed mainly reduced forms of sulfur, in particular pyrite and iron(II) sulfides together with elemental sulfur.     

The Response of Isolated Bridges Accounting for Spatial Variability of Ground Motion

The effects of the spatial variability of ground motion (loss of coherence, wave passage, and local site conditions) on the response of isolated bridges are investigated.

Therefore, a statistical approach is adopted to represent uncertainties in both the bridge configuration and the ground motion variability. The response of isolated bridges, designed for a standard input motion, under a spatially varying ground motion, is evaluated by nonlinear time-history analyses; the system performance is measured by the displacement demand on isolators.

Results show that the phenomenon affects the structural response considerably; the demand increases for the majority of isolators, irrespective of bridge configuration.     

One-Dimensional Ground Response as a Preliminary Tool For Dynamic Analyses in Geotechnical Earthquake Engineering

This article discusses how to calibrate some parameters of two-dimensional finite element models for numerical analyses in geotechnical earthquake engineering. The calibration was made through the simulation of the one-dimensional vertical propagation of S-waves in elastic layers, whose theoretical solutions are available in literature. The numerical results were compared with those obtained by frequency domain analyses. The influence of several sources of damping arising in the model, including that deriving from boundary conditions and numerical integration, was investigated. The proposed calibration procedure constitutes a useful preliminary step for performing advanced dynamic analyses of any geotechnical system.     

Selection of the Most Unfavorable Real Ground Motions for Low- and Mid-rise RC Frame Structures

The goal of this article is to select those real (or recorded) ground motions capable of exposing the low- and mid-rise reinforced concrete frame structures to an extreme limit state. By performing correlation analyses, two optimal intensity measures are first selected to represent the ground motion damage potential. Then based on each record's damage potential, four subsets of strong ground motions, referred to as the most unfavorable ground motions, are identified and preliminarily confirmed to be applicable to the low- and mid-rise RC frame structures.     

Numerical Analyses of the Effectiveness of Soft Barriers into the Soil for the Mitigation of Seismic Risk

An approach to mitigate the seismic risk of existing structures by means of the creation of a continuous thin layer of grouted soil at a convenient depth is presented. A parametric numerical analysis is reported using different constitutive models with reference to two geometrical schemes. It is shown that if the grouted layer has a stiffness significantly lower than that of the surrounding soil, it may be effective in reducing the seismic demand. In the parametric analyses, the positive role of yielding is also observed, which indicates that the barrier is more effective with larger input amplitudes.