Seismic Performance to Emergency Centers,Communication and Hospital Facilities Subjected to Nepal Earthquakes, 2015

Emergency centers, communication systems, and hospitals are essential infrastructures for emergency rescue and subsequent reconstruction activities. An investigation into the Nepal 2015 earthquake sequences found that the visited government offices were functioning normally 40 days after the main shock; that the local media failed to coordinate with the entire society at the beginning, but mobile phone-based communication recovered quickly; and that the hospitals in high-intensity areas were badly damaged as a result of improper design and adverse site configuration. Recommendations are proposed to enhance the aseismic capacity of structural and non-structural components using earthquake early warning and base isolation.     

Seismic Retrofitting of Non-Seismically Designed RC Beam-Column Joints using Buckling-Restrained Haunches: Design and Analysis

Many existing reinforced concrete (RC) structures around the world have been designed to sustain gravity and wind loads only. Past earthquake reconnaissance showed that strong earthquakes can lead to substantial damage to non-seismically designed RC buildings, particularly to their beam-column joints. This paper presents a novel retrofit method using buckling-restrained haunches (BRHs) to improve the seismic performance of such joints. A numerical model for RC joints is introduced and validated. Subsequently, a new seismic retrofit strategy using BRHs is proposed, aimed at relocating plastic hinges and increasing energy dissipation. The results indicate the retrofit method can effectively meet the performance objectives.     

A Multi-Mode Method for Estimation of Floor Response Spectra

A new simplified procedure for estimation of floor response spectra (FRS) is proposed. This methodology enriches the most common procedures using nonlinear response-history analysis to predict FRS by including a direct multi-mode technique to estimate FRS. A novel feature of the procedure is that the coupling effect is considered to establish equivalent modal systems and the FRS are developed by incorporating capacity spectrum method in conjunction with ductility-based FRS for each modal system. Both the proposed method and the traditional method are applied to three steel moment frame structures, and a reasonable accuracy is demonstrated.     

Seismic Behaviors of RC Frame Beam-Column Joints under Acid Rain Circle: A Pilot Experimental Study

This research was carried out to investigate the seismic performance of RC beam-column joints under acid rain circle via comparison of energy dissipation behavior and failure mechanism of joints with different corrosion levels and axial compression ratio. At the initial corrosion level, the strength, ductility, and energy consumption of RC beam-column joints improved slightly; at a later stage, the bearing and deformation capacity decreased as the corrosion rate of steel rebars increased. The test shows that with the increasing of the axial compression ratio, the initial stiffness and ultimate bearing capacity of the joints will increasing if the corrosion levels are the same, but the ductility of that will decrease.     

Seismic Evaluation of Tall Buildings Using a Simplified but Accurate Analysis Procedure

A simplified analysis procedure for evaluating the nonlinear seismic responses of tall reinforced concrete (RC) buildings is examined in this study. It is called the Uncoupled Modal Response History Analysis (UMRHA) procedure. It can be viewed as an extended version of the classical modal analysis procedure, where the nonlinear response of each vibration mode is first computed, and they are later on combined into the total response of the structure. The procedure requires the knowledge of the modal hysteretic behavior, which can be obtained from a cyclic modal pushover analysis. The responses of four tall buildings in Bangkok to distant large earthquakes are computed by this procedure and compared with those obtained from the Nonlinear Response History Analysis (NLRHA) procedure. These four buildings have different heights—varying from 20 to 44 stories, different configurations of floor plan, and different arrangement of RC walls. The comparison shows that the UMRHA procedure is able to accurately compute the story shears and story overturning moments, floor accelerations, and inter-story drifts of all these tall buildings. The required computational effort is also extremely low compared to that of the NLRHA procedure. Moreover, since the UMRHA procedure computes the response of each individual vibration mode, it provides more understanding and insight into the complex nonlinear seismic responses of these tall buildings.     

Effects of Geometrical Features on the Seismic Response of Historical Masonry Towers

ABSTRACT

Historical masonry structures are often located in earthquake-prone regions and the majority of them are considered to be seismically vulnerable and unsafe. Historical masonry towers are slender structures that exhibit unique architectural features and may present many inadequacies in terms of seismic performance. The seismic protection of such typologies of structures and the design of effective retrofitting interventions require a deep understanding of their behavior under horizontal loads. This paper presents the results of the seismic performance evaluation of historical masonry towers located in Northern Italy. A large set of case studies is considered, comprising a significant number of towers with high slenderness and marked inclination. First, a preliminary assessment of the dynamic behavior of the different towers is carried out through eigenfrequency analyses. Then, non-linear dynamic simulations are performed using a real accelerogram with different peak ground accelerations. A damage plasticity material model, exhibiting softening in both tension and compression, is adopted for masonry. The huge amount of results obtained from the non-linear dynamic simulations allows a comparative analysis of the towers to be performed in order to assess their seismic vulnerability and to show the dependence of their structural behavior on some geometrical characteristics, such as slenderness, inclination, and presence of openings and belfry. The evaluation of different response parameters and the examination of tensile damage distributions show the high vulnerability of historical masonry towers under horizontal loads, mainly in the presence of marked inclination and high slenderness. Some general trends of the seismic behavior of the towers are deduced as a function of the main typological features.     

Scalar Structure-Specific Ground Motion Intensity Measures for Assessing the Seismic Performance of Structures: A Review

The assessment of the seismic performance depends on the choice of the earthquake Intensity Measure (IM). During the past years many IMs, which take into account not only earthquake characteristics but also structural information, have been proposed. However, no consensus on which IM is the best predictor of the seismic response exists. Along these lines, the objective of this paper is to present the various developed scalar structure-specific seismic IMs and the problems associated with their use in practice, so that the engineer may become familiar with them and their implications in the context of Performance-Based Earthquake Engineering.     

Mine blast vibration response spectrum for structural vulnerability assessment: case study of heritage masonry buildings

Ground-borne vibrations induced by mine blasting are typically of low amplitudes, which are not considered a major concern for modern engineered structures. However, historic structures are often considered more vulnerable due to inadequate knowledge regarding the state of construction materials and structural response. Specifically, the construction materials used might be fragile or have deteriorated to a stage that could be vulnerable to such vibrations. Simplistic rule based on peak ground motion parameter has been adopted worldwide for safety assessment, while the frequency characteristics of vibrations are not taken into account. Further, there is very limited study on response of heritage structures to near-field blasting. This article presents a practical structural vulnerability assessment method for mine blast-induced vibrations. In particular, a design response spectrum model is proposed based on close range measurements of nearby mine blasting, which is compared with an existing design spectrum model for far-field mine blasts and a typical design spectrum model for earthquake actions. The method is illustrated through a case study of heritage masonry buildings in Australia. The unique blast data presented and the generalized methodology would be useful to both structural engineers and blast engineers in considering potential effects of blasting on heritage structures.     

Building survey forms for heterogeneous urban areas in seismically hazardous zones. Application to the historical center of Valparaíso,Chile

ABSTRACT

Building survey is an essential data-collection procedure to feed large-scale seismic vulnerability assessment. The available strategies usually consider survey forms to gather information about the urban buildings. The application of the available survey forms poses important challenges for the case of the heterogeneous urban centers including different structural typologies. This work proposes four specific survey forms for traditional structural typologies constructed with masonry, reinforced concrete, mixed steel-reinforced concrete, and timber. The proposed forms request essential information on the parameters necessary for seismic vulnerability assessment, by evaluating the lateral-load resistant system, regularity, condition of conservation, and existing damages. The survey forms were applied to the study of 111 buildings of the historical center of Valparaíso, Chile. The proposed methodology was complemented with the use of Geographic Information Systems to obtain a complete database with the structural characterization of the most representative typologies for future works of large-scale seismic vulnerability assessment.     

Remembering and forgetting 1974: the 2011 Brisbane floods and memories of an earlier disaster

The city of Brisbane, capital of the Australian state of Queensland, sits on a floodplain and has been struck by two devastating flood disasters in the last 50 years. This article contributes to the growing literature on disaster memory by tracing memories of a flood in 1974 as they were constructed and re‐enacted in a more recent disaster in 2011. The article examines how disaster memories shape local identities and considers how such memories influence policy and local knowledge, doing so by reference to an analysis of three forms of memory media—personal narratives, news media reporting, and built memorials. At times, memories of 1974 enabled Brisbane residents to prepare for an oncoming flood and to understand the scope of the 2011 event. Yet other memories produced a form of forgetting by positioning the earlier flood as a successfully navigated event now safely contained in the past. Findings from the analysis thus point to the importance of understanding memories of past disasters as a critical element of disaster planning and management.