Simplified Seismic Sidesway Collapse Capacity-Based Evaluation and Design of Frame Buildings with Linear Viscous Dampers

This article describes a simplified procedure for estimating the seismic sidesway collapse capacity of frame building structures incorporating linear viscous dampers. The proposed procedure is based on a robust database of seismic peak displacement responses of viscously damped nonlinear single-degree-of-freedom systems for various seismic intensities and uses nonlinear static (pushover) analysis without the need for nonlinear time history dynamic analysis. The proposed procedure is assessed by comparing its collapse capacity predictions on 272 different building models with those obtained from incremental dynamic analyses. A straightforward collapse capacity-based design procedure is also introduced for structures without extreme soft story irregularities.     

Displacement-Based Design of an Energy Dissipating System for Seismic Upgrading of Existing Masonry Structures

A displacement-based method for the design of an energy dissipating system is proposed in this article. The device, which is composed of added concrete walls equipped with hysteretic Added Damping and Stiffness (ADAS) dampers, is aimed at upgrading the seismic behavior of existing masonry structures. The design method is based upon a simplified model of the overall structure-dissipating system. The proposed displacement-based design procedure was tested by means of inelastic response-time history analyses considering different masonry structures. The results of the analyses were compared with the seismic behavior expected from the design.     

Full-Scale Shaking Table Tests on a Substandard RC Building Repaired and Strengthened with Post-Tensioned Metal Straps

The effectiveness of a novel Post-Tensioned Metal Strapping (PTMS) technique at enhancing the seismic behavior of a substandard RC building was investigated through full-scale, shake-table tests during the EU-funded project BANDIT. The building had inadequate reinforcement detailing in columns and joints to replicate old construction practices. After the bare building was initially damaged significantly, it was repaired and strengthened with PTMS to perform additional seismic tests. The PTMS technique improved considerably the seismic performance of the tested building. While the bare building experienced critical damage at an earthquake of PGA = 0.15 g, the PTMS-strengthened building sustained a PGA = 0.35 g earthquake without compromising stability.     

Contribution of Earthquake-Resistant Design for Reinforced Concrete Buildings when Coping with External Explosions

Fanaticism, as well as social and economic crises, has provoked a significant increase in the frequency of terrorist attacks during the last two decades and, when considered together with possible accidental explosions, has lead to a higher awareness among involved staff (owners, designers, constructors, government entities). Additionally, the fact that some buildings or targets are in seismic areas while others are not leads to a blast-loading behavior comparison. This article examines the contribution of earthquake-resistant design when coping with ground-surface explosions through nonlinear seismic assessment static analyses and nonlinear time-history analyses of blast resistance assessment using finite elements.     

Impact of Modification on Ground Motion Characteristics and Geotechnical Seismic Analyses for a California Site

The impact of different modification techniques on ground motion characteristics and results of seismic geotechnical analyses is investigated for a site in California. Twenty-eight motions were selected and scaled and also modified using both time domain (TD) and frequency domain (FD) techniques. PGV and PGD of the TD-modified motions are found to be larger than their FD-modified counterparts, but slightly less than the scaled ground motion characteristics. Cyclic stress ratios and amplification factors are similar for all sets of motions. Newmark-type slope displacements caused by the scaled and modified ground motions are similar (within 25%) for a variety of sliding masses.     

Seismic Behavior of L-Shaped RC Squat Walls under Various Lateral Loading Directions

Considerable progress has been made on the research of non-rectangular reinforced concrete (RC) squat walls over the past decades. However, the experimental data of L-shaped RC squat walls remain limited, especially for their seismic behaviors under non-principal bending actions. This paper presents an experimental and numerical investigation on L-shaped RC squat structural walls with an emphasis on how varying the directions of lateral cyclic loading influences the seismic responses of these walls. Four L-shaped specimens are tested under lateral cyclic displacements and low levels of axial compression The variables are axial loads and lateral loading directions. The performance of specimens is discussed in terms of cracking patterns, failure mechanisms, hysteretic responses, deformation components and strain profiles. Furthermore, three-dimensional finite element models are developed to supplement the experimental results. The direction of lateral loading is found to have a significant effect on the peak shear strength of L-shaped RC squat walls.     

《馆藏文物防震规范》关键技术——防震安全设计研究

《馆藏文物防震规范》WW/T 0069-2015,基于馆藏文物防震安全提出馆舍、展陈和文物全系统防震安全理念、设计方法和具体措施。本研究针对馆藏文物防震设计方法、适用范围、展柜及文物安全性判别等关键技术问题展开研究。首先,提出了"地震波+馆舍+展柜+文物"的全过程全系统防震设计理念;其次,针对浮放展柜及文物,进行地震作用下安全性分析研究;第三,与Getty博物馆研究成果对比,验证本研究理论的正确性与可靠性。分析得出:文物防震安全与文物高宽比、支撑接触面摩擦系数、安放处加速度峰值等因素有关;引入了抗滑动安全系数和抗倾覆安全系数进行设计,可充分保证文物安全性。     

SHAPE MEMORY ALLOYS IN SEISMIC RESISTANT DESIGN AND RETROFIT: A CRITICAL REVIEW OF THEIR POTENTIAL AND LIMITATIONS

Shape memory alloys (SMAs) are a class of materials that have unique properties, including Young's modulus-temperature relations, shape memory effects, superelastic effects, and high damping characteristics. These unique properties, which have led to numerous applications in the biomedical and aerospace industries, are currently being evaluated for applications in the area of seismic resistant design and retrofit. This paper provides a critical review of the state-of-the-art in the use of shape memory alloys for applications in seismic resistant design. The paper reviews the general characteristics of shape memory alloys and highlights the factors affecting their properties. A review of current studies show that the superelastic and high-damping characteristics of SMAs result in applications in bridges and buildings that show significant promise. The barriers to the expanded use of SMAs include the high cost, lack of clear understanding of thermo-mechanical processing, dependency of properties on temperature, and difficulty in machining.     

FRAGILITY OF STANDARD INDUSTRIAL STRUCTURES BY A RESPONSE SURFACE BASED METHOD

National and international regulatory standards require industrial risk assessment, taking into account natural hazards including earthquakes, in the framework of Quantitative Risk Analysis (QRA). Seismic fragility analysis of industrial components may be carried out similarly as what has been done for buildings, even though some peculiar aspects require the development of specific tools. In the present paper a contribution to the definition of a rational procedure for seismic vulnerability assessment of standardised industrial constructions in a probabilistic framework is given. The method covers a range of components of the same structural type. Seismic reliability formulation for structures is used. Both seismic capacity and demand are considered probabilistic with the latter assessed by dynamic analyses. The application example refers to shell elephant foot buckling of unanchored sliding tanks. A regression-based method is applied to relate fragility curves to parameters varying in the domain of variables for structural design.     

Physical and Numerical Approaches for the Optimal Insertion of Seismic Viscous Dampers in Shear-Type Structures

This article presents the results of an exhaustive parametric analysis which compares the performances offered by various systems (which lead to both classical and non classical damping matrices) of added viscous dampers in shear-type structures. The aim of the research work here presented is the identification of the system of added viscous dampers which maximizes the dissipative properties under an equal “total size” constraint. The choice of the systems of added viscous dampers considered in the comparison is carried out both using a numerical approach (based upon the use of genetic algorithms) and a physically based approach (based upon the properties of classically damped systems). The comparison is carried out through the numerical evaluation of the dynamic response of representative shear-type structures to both stochastic and recorded earthquake inputs. The results obtained using both approaches indicate that a damping system based upon the mass proportional damping component of the Rayleigh viscous damping matrix (referred to as MPD system) is capable of optimizing simultaneously a number of different performance indexes, providing the best “overall” damping performances. The MPD system is characterised by viscous dampers (a) which connect each floor to a fixed point and (b) which are sized proportionally to the corresponding floor mass.