Seismic Vulnerability Assessment of an Infilled Reinforced Concrete Frame Structure Designed for Gravity Loads

In the last decades, particular attention has been paid to the seismic vulnerability of existing reinforced concrete buildings designed for gravity loads only. Such buildings, designed before the introduction of capacity design in modern seismic codes, are very common, particularly in seismic prone countries of the Mediterranean area. Due to poor detailing and lacking of capacity design principles, high vulnerability has been highlighted in several past studies. In this article, inadequate seismic response and peculiar damage pattern are investigated by means of shake table tests performed on a 1:2 scaled 3-story infilled prototype. Particular attention is given to the role of beam-column joints and frame-panel interaction. The effectiveness of the EC8-based assessment approach is then evaluated; both linear and nonlinear numerical models, with different levels of sophistication, have been implemented in order to explore their behavioral aspects.     

Dynamic Characteristic Analysis of Two Adjacent Multi-grid Composite Wall Structures with a Seismic Joint by a Bayesian Approach

Field ambient vibration tests and modal identification using a Bayesian approach are conducted for a building made of multi-grid composite wall structure and divided into two adjacent parts by a seismic joint, to investigate the dynamic characteristics of the special structural type and the effects of the infilled seismic joint. It is found that dynamic interactions between the two structural parts exist possibly induced by the infill of the building separation. Natural frequencies obtained from other two modal parameter identification methods and modal analysis results of finite element models considering dynamic interactions agree with those identified by the Bayesian approach.     

Seismic Rotational Displacements of Gravity Quay Walls Considering Excess Pore Pressure in Backfill Soils

The effect of excess pore pressure developed in backfill soil during earthquake is an important consideration in rotational displacement prediction of gravity quay walls. Based on Newmark’s sliding block concept and stress-based excess pore pressure model, a new method is proposed to predict the critical rotational acceleration and angular acceleration time histories considering the development process of excess pore pressure in earthquake events. Then, the rotational displacement of gravity quay walls is predicted according to the calculated angular acceleration time histories. By using the proposed method, the effects of various parameters involved in the calculation have been studied by carrying out a parameter study. Analysis results reveal that the influence of excess pore pressure on the rotational displacement of gravity quay walls with saturated backfill soil is significant, so, can not be ignored; and rotational displacement is sensitive to the magnitude of earthquake, horizontal and vertical seismic accelerations of ground motion, wall and soil friction angle, and soil relative density. When the rotation and sliding of wall occur simultaneously, rotation and sliding will be inhibited by each other.     

PROCEDURE AND SPECTRA FOR ANALYSIS OF RC STRUCTURES SUBJECTED TO STRONG VERTICAL EARTHQUAKE LOADS

Abstract

In view of the compendium of field evidence and supporting analysis work indicating the possible damaging effects of vertical earthquake ground motion, this paper addresses the problem of code-type vertical force calculation. In light of recent engineering seismology studies of the relationship between vertical and horizontal peak ground acceleration, the inadequacy of the 2/3-rule depicted by codes is highlighted. A simple piece-wise linear relationship is proposed and shown to represent existing strong-motion measurements adequately. Bilinear and inelastic spectra are derived and studied. It is demonstrated that net tensile forces and displacements may ensue, thus eroding the shear resistance of RC columns. A simple procedure is outlined whereby modal analysis may be employed to estimate conservatively vertical earthquake forces on buildings. Finally, areas of further exploration and refinement are identified.     

The Role of Future Discounting in Subsistence Decisions: The Case of Hohokam Agave Bajada Cultivation

This article demonstrates the relevance of future discounting behavior to studies of prehistoric subsistence strategies. The case study of Agave spp. bajada cultivation among the Classic Period, a.d. 1150–1450, Hohokam of southern Arizona illustrates how slight discounting of future rewards can significantly alter agriculture investment strategies. Despite a higher kcal/hour return than maize agriculture, agave cultivation lessened or ceased in several communities during a time in which intensification would be predicted due to inferred subsistence stress. We surmise the decade-long maturation of agave made it unattractive relative to more immediate return resources in any context that presented risks to land tenure. The cessation of agave cultivation can be understood on two levels of explanation. The long-term investments required by agave and tendency to discount future rewards are the ultimate causes. Political and social instability during the tumultuous Classic period, causing increased insecurity in land tenure, are the proximal causes.     

AIDS as Occupational Hazard: Racial Mixing and Historical Space in Malaysia's Multinationals

In Malaysia, bangsa, a term blending race and ethnicity, structures modes of social and political‐economic organization that reflexively challenge and reinforce the significance of race, not just to the country's three main groups but to the construction of risk as well. Tracing this reflexivity, the author bridges a historical rendering of Malaysia's colonial‐capitalist incorporation with an ethnographic unpacking of its social artifacts: notions of space, place and race that confer on factories a high‐risk label for HIV/AIDS. It traces how multinational corporations, as landscapes of multiracial modernity, are both the quixotic trophies of Malaysia's global integration and a source of social dread. Risk is ethnographically shown to be more a sociohistoric dynamic than a statistical probability, reflecting ideas of racial individuation and ideals of social stability and cultural immiscibility anchored in colonial governance structures of nineteenth‐century Malaya and operative in contemporary Malaysia.     

SEISMIC BEHAVIOUR OF PERIMETER AND SPATIAL STEEL FRAMES

The present study deals with the seismic performance of partial perimeter and spatial moment resisting frames (MRFs) for low-to-medium rise buildings. It seeks to establish perimeter configuration systems and hence the lack of redundancy can detrimentally affect the seismic response of framed buildings. The paper tackles this key issue by com-paring the performance of a set of perimeter and spatial MRFs, which were “consistently designed”. The starting point is the set of low-(three-storey) and medium-rise (nine-storey) perimeter frames designed within the SAC Steel Project for the Los Angeles, Seattle and Boston seismic zones. Extensive design analyses (static and multi-modal) of the perimeter frame buildings and consistent design of spatial frame systems, as an alternative to the perimeter configuration, were conducted within this analytical study. The objectives of the consistent design are two-fold, i.e. obtaining fundamental periods similar to those of the perimeter frames, i.e. same lateral stiffness under design horizon-tal loads, and supplying similar yield strength. The seismic behaviour of perimeter and spatial configuration structures was evaluated by means of push-over non-linear static analyses and inelastic dynamic analyses (non linear time histories). Comparisons be-tween analysis results were developed in a well defined framework since a clear scheme to define and evaluate relevant limit states is suggested. The failure modes, either local or global, were computed and correlated to design choices, particularly those concerning the strength requirements (column overstrength factors) and stiffness (elastic stability indexes). The inelastic response exhibited by the sample MRFs under severe ground motions was assessed in a detailed fashion. Conclusions are drawn in terms of local and global performance, namely global and inter-storey drifts, beam and column plas-tic rotations, hysteretic energy. The finding is that the seismic response of perimeter and spatial MRFs is fairly similar. Therefore, an equivalent behaviour between the two configurations can be obtained if the design is “consistent”.     

Design Methodology for Seismic Upgrading of Substandard Reinforced Concrete Structures

This article presents a design methodology for seismic upgrading of existing reinforced concrete (RC) buildings. The methodology is based on the modification of the deflected shape of the structure so as to achieve a near-uniform distribution of interstorey drift along the building height, thereby eliminating damage localization. Yield Point Spectra are utilized for the definition of demand and a direct displacement-based design approach is implemented. The fundamental steps of the method are described in detail, including a systematic evaluation of assumptions and limitations. A full-scale tested structure is used as a case study for assessment and verification of the proposed methodology. Alternative retrofit scenarios are set according to target response and performance levels. The role of the target deflected response shape and its influence on the outcome of the retrofit strategy is investigated. The viability of the alternative retrofit scenarios is studied for different ground motions including near-fault earthquake records.     

A Fast and Efficient Simulation of the Far-Fault and Near-Fault Earthquake Ground Motions Associated with the June 17 and 21, 2000, Earthquakes in South Iceland

The two M_w 6.5 earthquakes on June 17 and 21, 2000, respectively, in the populated South Iceland Seismic Zone (SISZ) significantly augmented the Icelandic database of strong ground motions, and several strong velocity pulses were recorded at near-fault sites. The strong motions are interpreted via the Specific Barrier Model (SBM) and a mathematical model of near-fault velocity pulses. The data indicates self-similar source scaling and significantly greater attenuation of seismic waves than in other interplate regions. Through inversion of the data a new attenuation function for the SISZ has been adopted, which results in unbiased simulations. For the first time, the characteristics of the recorded near-fault pulses have been identified and compared to the worldwide database of such records. The SBM and the near-fault pulse model combine naturally in a fast and efficient synthesis of realistic, broad-band strong ground motions in the far-fault and near-fault region. Such simulations are showcased for the June 2000 earthquakes and indicate that the modeling approach adopted in this study is an effective tool for the estimation of realistic earthquake ground motions in the SISZ.     

Equivalent Damping in Support of Direct Displacement-Based Design

The concept of equivalent linearization of nonlinear system response as applied to direct displacement-based design is evaluated. Until now, Jacobsen's equivalent damping approach combined with the secant stiffness method has been adopted for the linearization process in direct displacement-based design. Four types of hysteretic models and a catalog of 100 ground motion records were considered. The evaluation process revealed significant errors in approximating maximum inelastic displacements due to overestimation of the equivalent damping values in the intermediate to long period range. Conversely, underestimation of the equivalent damping led to overestimation of displacements in the short period range, in particular for effective periods less than 0.4 seconds. The scatter in the results ranged between 20% and 40% as a function of ductility. New equivalent damping relations for four structural systems, based upon nonlinear system ductility and maximum displacement, are proposed. The accuracy of the new equivalent damping relations is assessed, yielding a significant reduction of the error in predicting inelastic displacements. Minimal improvement in the scatter of the results was achieved, however. While many significant studies have been conducted on equivalent damping over the last 40 years, this study has the following specific aims: (1) identify the scatter associated with Jacobsen's equivalent damping combined with the secant stiffness as utilized in Direct Displacement-Based Design; and (2) improve the accuracy of the Direct Displacement-Based Design approach by providing alternative equivalent damping expressions.