A Stability-Based Target Displacement for Direct Displacement-Based Design of Bridge Piers

P-Δ effects can cause instability if they are not properly accounted for during the design of bridge piers and other structures. When a bridge pier is designed with the Direct Displacement-Based Design Method, P-Δ effects are evaluated at the end of the design process and compared to the flexural strength of the pier to find a stability index. If the stability index exceeds the specified value, the design must be repeated, iteratively reducing the target design displacement. This article presents a model that when used at the beginning of design (without knowledge of strength) allows the estimation of the maximum lateral displacement that a bridge pier can sustain without exceeding the specified value of the stability index, therefore eliminating the need for iteration. The examples that are presented prove that the model is accurate and very useful for design of extended pile bents.     

Seismic Fragility Evaluation of RC Frame Structures Retrofitted with Controlled Concrete Rocking Column and Damping Technique

Acceleration response of simple yielding structure is proportional to its own weight, but it is limited by yield strength. Thus, using rocking columns that reduces global yield strength, a limited acceleration is achieved. However, the displacement becomes large due to lower strength and higher inelasticity, but it can be controlled by adding damping. Performing fragility analyses, the seismic response of R/C frame structures with rocking columns and viscous dampers is investigated. Near field MCEER ground motions are considered. The analyses show that the story accelerations are reduced by using rocking columns, while the story displacements are controlled by using viscous dampers.     

A Modified Capacity Spectrum Method with Direct Calculation of Seismic Intensity of Points on Capacity Curve

A direct methodology for solving the seismic intensity of each point on the capacity curve is proposed. By utilizing the procedure, a continuous curve between the structural response and the seismic intensity, the structural response function, can be easily generated. Unlike previous procedures that search for the performance point of a determined seismic intensity, the proposed methodology easily draws the full curve without iterations. The procedure is applicable to both a smooth design spectrum and an actual response spectrum. Examples indicate the methodology is accurate and fast, and convenient to be combined with existing procedures, such as Modal Pushover Analysis.     

Seismic Demand on Shear Panel Dampers Installed in Steel-Framed Bridge Pier Structures

This study is aimed at investigating the demand on shear panel dampers (SPDs) installed in steel structures under strong earthquake motions to serve as guidance for the recommended capacity of SPDs in seismic design. For this purpose, an extensive dynamic analysis is carried out on steel bridge pier structures with SPD devices. To describe the restoring force characteristics of SPDs, the analysis uses a newly developed combined hardening model based on experimental data. The seismic demands made on SPD devices are examined and then summarized to give recommended values for determining the necessary deformation capacity of SPDs.     

Stochastic Modeling of Earthquake Scenarios in Greater Tehran

Tehran, the capital of Iran, with millions of inhabitants, has been affected several times by historical and recent earthquakes that confirm the importance of seismic hazard assessment for the area. The main objective of this article is to present a probabilistic procedure to construct time series compatible with the source-path and site reflecting the influence of different magnitude events at different distances that may occur during a specified time period. A Monte Carlo approach is used to generate numerous synthetic catalogs for the evaluation of the probabilistic seismic hazard in greater Tehran over hard rock site for a return period of 475 years. The disaggregation of the seismic hazard is carried out to identify hazard-dominating events and to associate them with one or more specific faults, rather than a given distance. The stochastic finite-fault technique based on region specific seismic parameters is used to generate time series of earthquake scenario.     

Real-time Seismic Damage Detection of Concrete Shear Walls Using Artificial Neural Networks

Concrete shear walls are widely employed in buildings as a main resistance system against lateral loads. Early identification of seismic damage to concrete shear walls is vital for deciding post-earthquake occupancy in these structures. In this article, a method based on artificial neural networks for real-time identification of seismic damage to concrete shear walls was proposed. Inter-story drifts and plastic hinge rotation of concrete walls were used as the inputs and outputs of a MLP neural network. Modal Pushover Analysis was employed to prepare well-distributed data sets for training the neural network. The proposed method was applied to a five-story concrete shear wall building. The results from the network were compared with those obtained from Nonlinear Time History Analysis. It was observed that the trained neural network successfully detected damage to concrete shear walls and accurately estimated the severity of seismic-induced damage.     

Seismic Noise Characteristics at the Romanian Broadband Seismic Network

The noise level of the Romanian broadband stations operating since 2006 has been studied in order to identify the variations in background seismic noise as a function of time of day, season, and particular conditions at the stations. Power spectral densities and their corresponding probability density functions are used in this paper to characterize the background seismic noise. At high frequencies (> 1 Hz), seismic noise seems to have cultural origin, since significant variations (up to 55 dB) between daytime and nighttime noise levels are observed at almost all of the stations. However, this variability appears not to influence the detection capabilities of the Romanian Seismic Network in case of intermediate-depth earthquakes and earthquakes with magnitude over 3.0. For smaller magnitude events (Mw < 3), we showed that the number of stations detecting an event decreases during daytime. We studied the seasonal variation of the seismic noise for primary and secondary microseisms (with emphasize for the latter) and we demonstrated that the noise levels are higher in winter than in summer. We also observed a shift of the double-frequency peak from lower periods in summer to longer periods in winter. The polarization analysis indicated that the main sources of secondary microseisms for stations close to the Black Sea are coming from the Black Sea, while for the others the main sources are found in the Mediterranean Sea and Atlantic Ocean. Finally, the analysis of the probability density functions for stations located in different geologic conditions has pointed out that the noise level is higher for stations sited on softer formations than those sited on hard rocks.     

Stochastic Quantification of Soil-Shallow Foundation-Structure Interaction

This article highlights soil-structure interaction (SSI) effects on the seismic structural response accounting for uncertainties in the model parameters and input ground motions. A probabilistic Monte Carlo methodology was used to conduct approximately six million dynamic time-history simulations using an established rheological soil-shallow foundation-structure model. Considering the results yields outcomes that contradict prevailing views of the always beneficial role of SSI. In other words, the likelihood of having amplification in structural response due to SSI is large enough that it cannot be readily ignored. This research provides a significant first step towards reliability-based seismic design procedures incorporating foundation flexibility.     

Dynamic Stability and Design of C-Bent Columns

Symmetrically reinforced bridge columns with a horizontal cantilever in one direction, called C-bent columns, tend to deform predominantly in the direction of applied moment when subject to strong earthquake shaking. For this reason, the strength in the direction of applied moment is generally increased in design. This article describes the use of inelastic dynamic time history analyses with a suite of ground motion records to quantify the amount of strength increase required to minimize likely peak and permanent displacement demands. It is shown that the strength should be increased by approximately 2.3 times the applied moment in design.     

Friction Model for Sliding Bearings under Seismic Excitation

In this article, an experimentally validated model is proposed in order to take into account main sources of performance degradation that could be experienced by friction-based devices during a seismic event. Particular attention is dedicated to the degradation of friction characteristics due to repetition of cycles and consequent temperature rise. This effect can be responsible for overestimate of the dissipation capacity of the device. The proposed model of frictional behavior is suitable for immediate implementation in generalized structural analysis codes and provides an important design tool for realistic assessment of the seismic response of structures equipped with friction-based isolators.