PROVENANCING AND ARCHAEOLOGY OF ROMAN MILLSTONES FROM SARDINIA (ITALY)

Summary. Sardinia was an important Roman settlement and trade centre between 238 BC–500 AD and is an ideal site for study of Roman trade. Study of Roman millstones in Sardinia shows that the commonest type is the Pompeian (hour-glass) mill (forty-eight stones studied), with smaller numbers of cylindrical hand querns (sixteen stones studied). Most of these millstones are composed of igneous rocks which include grey vesicular lavas of basic/intermediate composition and a distinctive reddish rhyolitic ignimbrite. There is historical and archaeological evidence for millstone manufacture at six localities in Sardinia. Visual and petrographic study and X-ray fluorescence analysis for major and trace elements of seventeen millstone samples, and fifty rock samples from potential source areas have been used to provenance the igneous rock millstones. The grey vesicular lava millstones have varied sources within the Tertiary-Recent volcanic rocks of Sardinia, while the millstones composed of rhyolitic ignimbrite are from a single source of Tertiary ignimbrite at Mulargia (central west Sardinia). A single hand mill from the north of Sardinia was imported probably from Agde in southern France, and is the only sample composed of non-local rock. Mulargia millstones were widely traded within the western Mediterranean and show a rapid decrease in frequency of occurrence with increasing distance from the source. Sardinia was therefore an important centre of Roman millstone production and a source of millstone trade during the period of Roman settlement.     

Poaceae phytoliths from the Niassa Rift,Mozambique

The most common grass phytoliths from “Zambezian” miombos are described here for the first time. Their potential for long term preservation in sediments makes them a useful tool in the reconstruction of ancient plant communities and plant/human interactions. We processed 60 plant samples (26 identified genera and species), with an average of 300 phytoliths counted per sample to a total of 18,586. Forty-seven morphotypes were described as per the International Code for Phytolith Nomenclature, with exceptions, including forty-five discreet shapes and two articulated forms, which can be used as comparative reference materials. We conducted three forms of statistical analyses: Discriminant Analysis, Cluster Analysis, and Principal Component Analysis. The highest biomineral content was recorded among the Bambuseae and Paniceae, while the lowest silica production is detected in the Cynodonteae tribe. Typologically, the subfamily Panicoideae yielded 50% of the types reported here, 32% are from the Chloridoideae, 12% from the Bambusoideae, and 8% from the Arundinoideae sensu lato. Overall, the idealized Zambezian Poaceae phytolith spectrum is dominated by a small subset of Poaceae short cells, which include five morphotypes conventionally associated with Panicoid grasses (Bilobate concave outer margin long shaft, Bilobate concave outer margin short shaft, Bilobate convex outer margin long shaft, Bilobate convex outer margin short shaft, Cross), one morphotype commonly seen in Chloridoid taxa (saddle), and two types that appear across subfamily boundaries (tower, tower horned). The next logical step to take in regional phytolith research is the account of phytoliths deposited in soils underneath living plants, for they represent the interface between existing vegetation communities and the inevitably distorted fossil assemblages that the paleobotanist uses for environmental reconstruction.     

Seismic Behaviors of RC Frame Beam-Column Joints under Acid Rain Circle: A Pilot Experimental Study

This research was carried out to investigate the seismic performance of RC beam-column joints under acid rain circle via comparison of energy dissipation behavior and failure mechanism of joints with different corrosion levels and axial compression ratio. At the initial corrosion level, the strength, ductility, and energy consumption of RC beam-column joints improved slightly; at a later stage, the bearing and deformation capacity decreased as the corrosion rate of steel rebars increased. The test shows that with the increasing of the axial compression ratio, the initial stiffness and ultimate bearing capacity of the joints will increasing if the corrosion levels are the same, but the ductility of that will decrease.     

Production centers of cooking pots in Iron Age Judah

This paper will present and discuss a multifaceted research project dealing with the production of cooking pots during the Iron Age II (ca. 1,000–586 BCE) Judah (modern Israel). In particular the new compositional analysis of 541 cooking vessels from 11 sites in Iron Age Judah will be presented. The study employs petrographic and chemical (NAA) analysis. The results of this ongoing research have already produced interesting information about production centers and movements of cooking pots in Iron Age II Judah. Apparently, the vast majority of the cooking pots sampled were made of a similar type of clay, related to terra rossa soil. This is true also for sites in the northern Negev and Judean Desert, where the type of soil was not available in the region of the sites. Furthermore, many of the cooking pots distributed around Judah were made in Jerusalem according to a well-located chemical profile (JleB). Other groups may represent Judean Shephelah production centers as the Lachish area as well as production centers in southern Israel or ancient Edom. The implications of the importation patterns of cooking pots by peripheral Judean sites will be discussed.     

文物建筑保护工程中的勘察设计——以北大红楼等三个文物建筑为例

文物建筑勘察的目的是掌握现状文物的真实状态和危险程度,进而为制定科学合理的保护方案提供重要依据和支撑。为此,探讨了文物建筑保护工程勘察设计的特点和内涵,结合实际案例,归纳总结了文物建筑勘察设计四个基本特点:在强调文物真实性的同时,要求勘察内容的完备性和详实性;强调病害机理分析与病害成因的数值仿真验证;关注文物本体的抗震性能研究;强调以最小的干预获取最真实的情况。阐述论证了建立文物防灾减灾体系的必要性和重要性,点明了文物建筑勘察设计未来的发展方向必然和防患于未然的防灾减灾体系相联系,作为该体系下的技术支撑而长期发展。     

故宫太和殿动力特性与常遇地震响应

为更好地保护故宫太和殿,采用有限元分析方法,研究了太和殿的动力特性及常遇地震作用下的响应。采用弹簧单元模拟榫卯节点及斗拱构造,并考虑柱础为铰接,建立了太和殿有限元模型。通过模态分析,获得了太和殿基频及主振型;通过对模型进行时程分析,获得了典型节点的位移、加速度响应曲线,以及典型单元的内力响应曲线,评价了太和殿的抗震性能。结果表明:太和殿基频为0.9Hz,主振型以平动为主;常遇地震作用下,太和殿能保持稳定振动状态,结构的内力和变形均在容许范围内,且斗拱及榫卯节点均能发挥一定的减震作用。     

Materials Characteristics of Roman and Arabic Mortars and Stuccoes from the Patio De Banderas in the Real Alcazar of Seville (Spain)

This study discusses the materials and traditional knowledge used in the manufacture and application of lime mortars and stuccoes by Romans and Arabs in Seville (southern Iberian Peninsula). All of the samples studied contain calcite as a binder, combined with aggregates based on river sand from the filling materials of the Guadalquivir River's depression, located in the vicinity of the Real Alcazar Palace in Seville, Spain, where the artefacts were discovered. The Romans used high‐quality production technology, as evidenced by the careful selection of raw materials as well as by the adequate binder‐to‐aggregate ratio and the elevated homogeneity of the mortars and stuccoes. The suitable distribution of aggregates resulted in higher density values for Roman fragments than for Arabic ones. Results derived from Arabic samples suggest a decline in technology manufacture over time. This work provides useful information, particularly regarding the Roman and Arabic periods in the Iberian Peninsula. The analytical techniques employed in this study were X‐ray diffraction (XRD), X‐ray fluorescence (XRF)—using conventional and portable systems, scanning electron microscopy (SEM), petrographic microscopy, differential thermal analysis/thermogravimetry (DTA/TG), particle‐size analysis and mercury intrusion porosimetry.     

Coalition Structures and Policy Change in a Consensus Democracy

This paper studies the relation between coalition structures in policy processes and policy change. While different factors such as policy images, learning processes, external events, or venue shopping are important to explain policy change, coalition structures within policy processes are often neglected. However, policy change happens as a result of negotiations and coordination among coalitions within policy processes. The paper analyzes how conflict, collaboration, and power relations among coalitions of actors influence policy change in an institutional context of a consensus democracy. Empirically, I rely on a Qualitative Comparative Analysis to conduct a cross‐sector comparison of the 11 most important policy processes in Switzerland between 2001 and 2006. Coalition structures with low conflict and strong collaboration among coalitions as well as structures with dominant coalitions and weak collaboration both facilitate major policy change. Competing coalitions that are separated by strong conflict but still collaborate strongly produce policy outputs that are close to the status quo.     

Eighteenth‐Century Meissen Porcelain Reference Data Obtained By Proton‐Beam Analysis (PIXE–PIGE)

Prior to their restoration, the porcelain bodies of broken pieces from 31 authentic Meissen objects of the early 18th century were investigated by proton‐beam analysis. Attention was paid so that the proton beam probed only the bare porcelain paste areas of fractures. Thus, contributions to the measured X‐ray and γ‐ray spectra from adjacent surface glaze were prevented. The chemical compositions, obtained by simultaneous detection of elements with Z ≥ 13 (X‐rays) and lighter elements Z ≤ 14 (γ‐rays), represent rather consistent mixtures of paste ingredients. This result highlights the durable recipes and raw materials used in early Meissen porcelain production in the years 1725–50. Mean concentration values of element oxides, deduced from the detailed measurements, prove suitable for use as a database for Meissen porcelain paste identification. Material authentication of intact objects, without access to the bare porcelain body, is demonstrated by inspection of the white glaze. Unique museum objects are examined in atmosphere and without sampling. A low proton‐beam intensity and a short irradiation time ensure non‐destructive analysis. Simultaneous radiation and backscattered particle detection allow complete composition analysis, using the established ion beam techniques of particle‐induced X‐ray emission (PIXE), particle‐induced gamma‐ray emission (PIGE) and Rutherford backscattering spectrometry (RBS).     

Comparison of the Spectral Representation Method to Simulate Spatially Variable Ground Motions

The spectral representation method (SRM) is widely used when simulating spatially variable ground motions. It has mainly two formulas, i.e., the random amplitudes and the random phases formulas. There exist three methods for decomposing the cross spectral density matrix: Cholesky decomposition, eigen decomposition, and root decomposition. Therefore, there are six forms with respect to the different combinations of the simulation formulas and the decomposition methods. To provide researchers and engineers with the guidance on choosing simulation method, the six forms are systematically investigated from five aspects: the power intensity, response spectra, and stochastic error of auto/cross spectral density, Fourier spectra, and difference indexes for Fourier amplitudes and phases. Finally, we give the following advice: the characteristics of the ground motions simulated by the random amplitudes formula are independent of the decomposition method, while the characteristics of the ground motions simulated by random phases formula are dependent of the decomposition method. Furthermore, the root decomposition is strongly recommended when utilizing the random phases formula.