The Influence of Masonry Infill Walls in the Framework of the Performance-Based Design

In this article, a performance-based seismic design (PBD) methodology is proposed for the design of reinforced concrete buildings, taking into account the influence of infill walls. Two variants of the PBD framework are examined: The first is based on the non-linear static analysis procedure (NSP) while the second relies on the non-linear dynamic analysis procedure (NDP). Both design approaches are compared in the context of structural optimization with reference to the best possible design achieved for each case examined. Life-cycle cost analysis is considered a reliable tool for assessing the performance of structural systems and it is employed in this study for assessing the optimum designs obtained. The optimization part of the problem is performed with an Evolutionary Algorithm while three performance objectives are implemented in all formulations of the design procedures. The two most important findings can be summarized as follows: (i) if structural realization follows the design assumptions, then total expected life-cycle cost of the three type of structures, bare, fully infilled and open ground story, is almost the same and (ii) if an open ground story building is designed as bare or as fully infilled frame, real performance will be much worse than anticipated at the design stage.     

Numerical Evaluation of Seismic Soil Pressures on Rigid Walls Fixed to the Bedrock

Seismic soil pressures developed on a 7 m rigid retaining wall fixed to the bedrock are investigated using a finite element model that engages nonlinear soil intended materials available in OpenSees. This allows incorporation of the inelastic behavior of the soil and wave propagation effects in the soil-wall system seismic response. The nonlinear response of the soil was validated using the well-stablished, frequency-domain, linear-equivalent approach. An incremental dynamic analysis was implemented to comprehensively examine the effect of soil nonlinearity and input motion on the induced seismic pressures and to evaluate current code equations/methodologies at different levels of earthquake intensity. The results show that soil nonlinearity and seismic wave amplification may play an important role in the response of the soil-wall system. Therefore, methodologies that rely only on peak ground acceleration may introduce large bias on the estimated seismic pressures in scenarios where high nonlinearity and site amplification are expected.     

Capacity Evaluation of Typical Stud-Track Screw Connections in Nonstructural Walls

A series of component-level experiments have been conducted aiming to evaluate the force and displacement capacities of typical stud-track screw connections (STCs) in steel-framed partition walls. The variables considered in these experiments included screw-edge distances, loading protocols (monotonic or cyclic), and stud and track thicknesses. The experimental data was then utilized to develop different capacity fragility curves for STCs in terms of displacements. A series of analytical STC hinge models were also proposed and validated using this data. The hinge models can be adopted in future studies to develop a comprehensive analytical model for a typical partition wall assembly.     

Ductility of a Structural Wall with Spread Rebars Tested in Full Scale

The experimental work focuses on the ductility of the reinforced concrete (RC) seismic structural walls in buildings of mid-rise height. A full-scale five-story structural wall was tested to obtain results, still scarce in literature, without the influence of size effect. An unusual detailing with large diameter longitudinal rebars uniformly distributed in the wall length was adopted to prevent premature web rebar fracture and shear sliding. The plastic hinge length and deformations were evaluated in detail. The results show the high ductility of the wall that reached a total drift of 2.5%, larger than those usually required in design.     

The SAFE Experimental Research on the Frequency Dependence of Shear Wall Seismic Design Margins

The SAFE experimental programme consists of a series of 10 specimens of shear walls, with different reinforcement ratios, tested until their ultimate capacity under seismic input motion by the pseudo dynamic method. A unique input signal is used, calibrated for controlling the seismic demand. Its input central frequency is selected so that for some specimens it is lower than their eignenfrequency, while for other ones it is the opposite. In conclusion there is clear experimental evidence that design margins are much larger in the second case (input central frequency larger than structure eignenfrequency) than in the first one.     

Floor Response Spectra for Bare and Infilled Reinforced Concrete Frames

The objective of this article is to study the effects of structural nonlinear behavior on Floor Response Spectra (FRS) of existing reinforced concrete frames. This study examines how the FRS vary with the level of post-elastic behavior in buildings of different number of stories and masonry infill wall configurations. The effect of damping modeling assumptions is also investigated. Differences and similarities with findings from the literature are discussed. On the basis of the obtained results, a commentary on the adequacy of basic assumptions used in predictive equations proposed by different seismic codes is offered.