Cyclic Performance of an Elliptical-Shaped Damper with Shear Diaphragms in Chevron Braced Steel Frames

Several advantages of yielding dampers in controlling seismic energy have attracted the attention of many researchers in designing new buildings and retrofitting existing structures. In recent decades, various shapes and substances of such dampers have been used in engineering structures and their behavioral features, including the energy dissipating capacities, have been assessed. In this article, a novel method is presented to obtain the design relationship of two types of yielding elliptical dampers in terms of their selected geometric properties, i.e. distance between the shear diaphragms or virtual diameter and thickness. In addition, two different elliptical-shaped steel dampers equipped with the shear diaphragms are proposed and modeled using the finite element software ABAQUS and their performances are investigated. Then, 30 and 25 models, respectively, of the first and second types are studied using pushover analysis. The designed dampers considering the proposed relationships are used in two chevron braced steel frames placed between the bracing and the beam. Due to their desirable efficiency in energy dissipation and increase in the equivalent viscous damping of the frame, better efficiency is achieved in the modified damper with easier fabrication.     

Effective Stiffness of Non-Rectangular Reinforced Concrete Structural Walls

The effective stiffness of a structural wall is an important property in design, which many design codes estimate by the moment inertia of the wall section with a reduction factor. The reduction factor is typically estimated by empirical equations based on configurations of the wall. The existing methods for the reduction factor were proposed based on investigations on rectangular reinforced concrete (RC) walls. The effective stiffness of non-rectangular RC walls can be more complex than that of rectangular RC walls. As such, more research investigations are required. Based on finite element models, the effective stiffness of U-shaped and T-shaped RC walls was investigated in this paper. The numerical results were further adopted to develop methods for calculating the effective stiffness of non-rectangular wall in different loading directions. The proposed method was afterward compared with the experimental data.     

Developing Direct Displacement-Based Procedures for Simplified Loss Assessment in Performance-Based Earthquake Engineering

Various loss assessment methodologies have been proposed and developed over the past decades to provide risk assessment on a regional scale. There is an increasing need, however, to provide engineers with practical tools for building-specific loss assessment. Recently, progress has been made towards probabilistic loss models such as the PEER framework. However, as comprehensive probabilistic methodologies could be too complex for practicing engineers, this article presents a simplified probabilistic loss assessment methodology that builds on a direct displacement-based framework. The methodology is tested via examination of two RC frame buildings and encouragingly shows similar results to the PEER methodology.     

Floor Response Spectra for Bare and Infilled Reinforced Concrete Frames

The objective of this article is to study the effects of structural nonlinear behavior on Floor Response Spectra (FRS) of existing reinforced concrete frames. This study examines how the FRS vary with the level of post-elastic behavior in buildings of different number of stories and masonry infill wall configurations. The effect of damping modeling assumptions is also investigated. Differences and similarities with findings from the literature are discussed. On the basis of the obtained results, a commentary on the adequacy of basic assumptions used in predictive equations proposed by different seismic codes is offered.