Can the Raman spectrum of anatase in artwork and archaeology be used for dating purposes? Identification by Raman microscopy of anatase in decorative coatings on Neolithic (Yangshao) pottery from Henan,China

Scanning electron microscopy/energy dispersive X-ray analysis has earlier shown that the white background layer (slip) on painted pottery sherds (Yangshao culture, Henan, China, 4200 BC) is composed of kaolinitic clay containing titanium in the assumed form of TiO₂ at just 1 wt%. The same samples of white slip have now been studied by Raman microscopy, revealing bands characteristic of anatase, but none from the majority species, the matrix of kaolinitic clay. These results highlight the extraordinarily intense Raman scattering from even trace amounts of anatase and thus the need to recognise that, although the colours of archaeological artefacts are almost always determined by the nature of the matrix, the Raman spectrum may be determined by a highly scattering trace component such as anatase. The significance of anatase as a potential date-marker pigment on works of art and archaeological artefacts is discussed.     

A contribution to the study of post-depositional alterations of pottery using TL dating analysis

In luminescence dating, the potassium concentration significantly contributes to the dose rate value in the age estimation. Within this study, fine-grain thermoluminescence dating has been applied on sherds of calcareous pottery of known age, excavated at a Roman site in Mallorca, Spain. For those of the samples that showed signs of severe potassium leaching, according to chemical and mineralogical examination, the thermoluminescence analysis provided overestimated dates. By using the known archaeological age of the samples, a corrected dose rate value can be estimated which provides the potassium concentration averaged for the burial period. Finally, a step-like model can then be used to estimate the fraction of the burial period after which most of the alteration effects took place.     

汉晋墓葬中随葬陶瓶内盛物的初步研究

汉至西晋时期的墓葬中经常发现一些盛于朱书陶瓶内的物品,按其质地可以分为天然矿物类、金属制品类、植物类、五谷类。本文对已发现的材料进行了初步考察,认为这些物品就是道士们做法事的遗痕,分别起着压镇、代形、充当贡赋的作用。这些物品和巫医术士使用的物品大致相同,反映出早期道教和巫医方术之间密不可分的关系。     

The Hellenistic and Roman Syracuse (Sicily) Fine Pottery Production Explored by Chemical and Petrographic Analysis

The chemical composition and petrographic features of 51 samples of fine pottery selected from the archaeological site of Syracuse have been established by means of optical microscopy and X‐ray fluorescence spectrometry, with the aim of creating a reference group for the ceramics produced in this important Greek colony during the Hellenistic–Roman period. This reference group is constrained by the analysis of six kiln wasters and of raw materials outcropping in the studied area. Among the studied findings, the main part is assignable imputably to local production, while some specimens probably come from Greece and other colonies (Messina and Gela). The Syracuse fine pottery is characterized by inclusions formed mainly by quartz and micaceous and fossiliferous groundmass. The used pastes were more or less purified through the removal of the sandy‐to‐coarse silty granulometric fraction. The multivariate statistical analysis of chemical data permits the identification of production at Syracuse on the basis of comparison with the kiln wasters and the Plio‐Pleistocene clays.     

潮湿彩绘陶加固材料对比研究及应用

针对考古出土的彩绘陶存在脆弱易毁、难以保存的问题,选择明胶和水性氟碳作为潮湿彩绘陶片的加固材料,采用不同浓度的加固材料对4种颜色彩绘陶片进行加固,并对加固前后的强度、色差以及光泽度进行检测和对比,结果表明较为理想的浓度选择为明胶在1%左右,水性氟碳浓度在20%左右。同时,对有底层和无底层两种类型的彩绘陶片进行加固对比实验,发现经明胶加固及老化后,有底层试样的色差和光泽度变化比无底层试样小;经水性氟碳加固后,有底层试样的色差和光泽度变化比无底层试样小,但老化后,则相反。在实践应用时,选用这两种材料对盱眙出土的一组潮湿彩绘陶进行了抢救性加固保护,都取得理想的效果。     

聚醋酸乙烯酯乳液的表征、性能及其在彩绘类文物保护中的应用

聚醋酸乙烯酯(PVAc)乳液是常见的彩绘类文物保护材料。采用激光粒度仪、热重/差热分析、红外光谱、X-射线衍射、扫描电镜、透射电镜等表征了PVAc乳液的粒径以及胶膜的热稳定性、结构和形貌;采用粘度计、表面张力仪、pH计、电导率仪等研究了乳液浓度与其粘度、表面张力、pH、电导率的关系;通过冻融、室温-高温放置、离心分离研究了乳液的稳定性;同时用PVAc乳液对模拟起甲和酥碱的壁画进行了修复。结果表明,PVAc乳液粒径呈双峰分布,小粒子的平均粒径为380 nm,大粒子的平均粒径为5.85μm;乳液胶膜为非结晶物质,胶膜热重的最终质量残留为1.54%,335℃出现放热峰。PVAc乳液的电导率随浓度的增大而增大,pH随浓度的增大而下降;相同温度下表面张力随浓度的增大而基本呈现低浓度下降,高浓度上升的趋势。相同浓度下,表面张力随温度升高而无显著变化,表明PVAc乳液的表面张力受温度变化影响不大。相同温度下,乳液粘度随浓度的增大而增大;相同浓度下,乳液的粘度随温度的升高而降低。冻融、离心分离和不同温度下静置发现,该乳液出现分层。用该乳液对模拟起甲和酥碱壁画修复后,再分别老化20个循环和12个循环,发现颜料层再次空鼓、起甲。综合分析,说明实验中所使用的该种PVAc稳定性和抗老化能力较弱,在修复彩绘类文物中应慎重选择PVAc的种类,综合考虑PVAc的使用浓度、环境因素对其性能的影响,以达到最佳使用效果。     

陕西蓝田水陆庵彩绘泥塑颜料分析研究

水陆庵位于陕西蓝田王顺山下,庵内现存三百余平方米精美绝伦的明代彩绘泥塑,是我国泥塑保存最多、最完整的明代彩绘泥塑群之一。为明确水陆庵彩绘泥塑的颜料使用情况,采用光学显微镜、X射线衍射仪、显微红外光谱仪、扫描电镜-能谱仪和显微拉曼光谱仪对颜料样品进行科学分析。结果表明,除中隔壁背面重妆区域的蓝色颜料主要成分是普鲁士蓝之外,水陆庵彩塑使用的颜料大多为矿物颜料,包括铅丹、朱砂、铁红、氯铜矿、雌黄和云母等。研究结果将为水陆庵后续保护修复提供科学依据,并为丰富关中地区明代彩绘泥塑颜料类型补充科学信息。     

Preliminary Characterization of Pottery by Cathodoluminescence and SEM–EDX Analyses: An Example from the Yeha Region (Ethiopia)

Yeha was a political and cultural centre of the Ethio‐Sabaean culture (D’MT) in northern Ethiopia and southern Eritrea. Part of the archaeological research deals with pottery of local, regional and imported origin. The research—investigations and examinations—tries to classify local pottery in two ways: first, by analysing the mineralogy of the temper using light microscopy and cathodoluminescence; and, second, by analysing the main element composition of the clay matrix using a scanning electron microscope with energy‐dispersive X‐ray detection (SEM–EDX). The cathodoluminescence shows that the temper material has differences in the colours of feldspars with a similar mineralogical composition. The results demonstrate that the pottery was produced by using local material that originates from various sources in the Yeha region and that the same raw materials were used in different types of pottery.     

中古壁画与陶塑再现的挎包女性形象

中国服装史一直以来较为忽视服饰中的挎包装饰,本文利用新出土的中古壁画和唐代各种挎包女性陶塑,对中古艺术中的挎包女性形象进行了初步分析。作者认为,"挎包女人"图像赋予了女性非凡的人性精神。同时,作者还对外国该类形象的出现和流传进行了梳理,依据现存图像资料,指出中国古代女性挎包要比西方早出现几个世纪。挎包、拎包具有时尚和实用美观的意义,折射出古代女性鲜明的超前意识和服装审美。     

Pottery Production, Distribution, and Consumption—The Contribution of the Physical Sciences

The study of the life cycle of pottery, from the selection of raw materials and the production stage through distribution and use to ultimate discard, can make a valuable contribution to archaeological research. The aim of the present paper is to provide a summary and critical assessment of the particular contribution of the physical sciences to the reconstruction and interpretation of this life cycle, in large part through the presentation of selected case studies. The topics covered include the reconstruction of the technology used in pottery production, through a combination of microscopy, radiography, and chemical analysis; the investigation of the extent of craft specialization and the organization of pottery production; the reconstruction of pottery distribution from its production center, using thin-section petrography and chemical analysis, and the interpretation of these data in terms of exchange and trade; the reconstruction of the consumption stage or uses to which pottery was put, from the study of surface wear, organic residues, and performance characteristics; and a discussion of the reasons for the introduction of pottery and for the different technological choices made in pottery production. Throughout, the importance of considering the overall environmental, technological, economic, sociopolitical, cultural–ideological and historical context in which the pottery was produced, distributed, and consumed is emphasized. The paper is concerned, almost-exclusively, with unglazed earthenware spanning prehistory through to circa 1500 AD.