Nonlinear Response of RC Framed Buildings with Isolation and Supplemental Damping at the Base Subjected to Near-Fault Earthquakes

The nonlinear seismic response of base-isolated framed buildings subjected to near-fault earthquakes is studied to analyze the effects of supplemental damping at the level of the isolation system, commonly adopted to avoid overly large isolators. A numerical investigation is carried out with reference to two- and multi-degree-of-freedom systems, representing medium-rise base-isolated framed buildings. Typical five-story reinforced concrete (RC) plane frames with full isolation are designed according to Eurocode 8 assuming ground types A (i.e., rock) and D (i.e., moderately soft soil) in a high-risk seismic region. The overall isolation system, made of in-parallel high-damping-laminated-rubber bearings (HDLRBs) and supplemental viscous dampers, is modeled by an equivalent viscoelastic linear model. A bilinear model idealizes the behavior of the frame members. Pulse-type artificial motions, artificially generated accelerograms (matching EC8 response spectrum for subsoil classes A or D) and real accelerograms (recorded on rock- and soil-site at near-fault zones) are considered. A supplemental viscous damping at the base is appropriate for controlling the isolator displacement, so avoiding overly large isolators; but it does not guarantee a better performance of the superstructure in all cases, in terms of structural and non structural damage, depending on the frequency content of the seismic input. Precautions should be taken with regard to near-fault earthquakes, particularly for base-isolated structures located on soil-site.     

Predicting the Seismic Response of Capacity-Designed Structures by Equivalent Linearization

An equivalent linearization procedure is developed for predicting the inelastic deformations and internal forces of capacity-designed structures under earthquake excitations. The procedure employs response spectrum analysis, and mainly consists of the construction of an equivalent linear system by reducing the stiffness of structural members that are expected to respond in the inelastic range. These members are well defined in structures designed with capacity principles. Maximum modal displacement demands of the equivalent linear system are determined either from the equal displacement rule, or from independent nonlinear response history analysis of SDOF systems representing inelastic modes.

Predictions obtained from the proposed equivalent linearization procedure are evaluated comparatively by using the results of nonlinear response history analysis as benchmark, linear elastic response spectrum analysis and conventional pushover analysis. The deformations and capacity controlled actions of a 12-story symmetrical plan concrete frame and a 6-story unsymmetrical plan concrete frame are obtained by each method under 96 strong ground motions. It is observed that the proposed procedure results in better accuracy in estimating the inelastic seismic displacement response parameters and capacity controlled forces than the other two approximate methods.     

Subsoil Interventions Effect on Structural Seismic Response. Part II: Parametric Investigation

In the present article the effect of subsoil interventions on the response of soil-structure systems under strong earthquake shaking is studied. Several idealized configurations of commonly applied as well as innovative intervention techniques are examined, referring to increased or reduced stiffness of the initial subsoil conditions of the subsoil-foundation-structure system. Numerical analysis utilizing validated simulation procedures covers a large spectrum of structures and soil conditions. A parametric investigation of several key factors is also conducted. A comparative evaluation of the results in time and frequency domain is aiming in generalizing the conclusions to several earthquake and soil-structure combinations. Obtained results reveal a rather detrimental effect of the stiffness-increasing methods, whereas techniques related to modification of oscillation dynamic properties with flexible subsoil intervention schemes, present promising alternatives for an efficient mitigation of structural response to strong earthquakes.     

Some Issues in Seismic Analysis and Design of Blockwork Wharves

During past decades, a number of ports worldwide have suffered extensive earthquake-related damage. As seaports play a key role in the world's economy, their seismic performance should be enhanced, clearly stated and reliably pursued by designers. This work focuses on seismic vulnerability of wharves in Italy. According to a recently carried out statistical study, most of the existing wharves are gravity-type, made of superimposed, dry-connected blocks, particularly in older facilities. Such technology is widely in use worldwide but it has not attracted much research interest so far. In the present study, the validity of current, simplified design approaches has been investigated by comparison with the results of inelastic dynamic time-history analyses. Permanent displacements of the wall blocks have been calculated. Available performance criteria have been reviewed. A real wharf structure in the Port of Ancona (Italy) has been studied in depth, as a methodological example. For such structure, a parametric study has been conducted with the aim of investigating the role played by different design parameters and to assess the validity of the widely in use pseudo-static method.     

Simple Iterative Use of Lyapunov's Solution for the Linear Optimal Seismic Design of Passive Devices in Framed Buildings

This article presents a Lyapunov-based analysis/redesign approach for the optimal seismic design of added viscous dampers in 3D framed structures. The optimal solution minimizes the total added damping while the mean squared drifts at the peripheral frames are constrained to allowable values under a white noise excitation. The proposed approach uses Lyapunov equation for analysis and an optimality criterion that dictates “fully stressedness” for redesign. Hence, the design process is actually comprised of an iterative solution of a set of algebraic equations. Three examples are solved so as to highlight the advantages of the proposed approach — a 3-story shear frame, an 8-story, 3-bay by 3-bay setback frame, and a 10-story industrial frame.     

Seismic Assessment of the Bell Tower of Santa Maria Del Carmine: Problems and Solutions

A complete structural analysis of the bell tower of Santa Maria del Carmine in Naples (Italy) has been developed by using a 3D FE model based on the results of detailed experimental investigations in situ. Linear analysis for gravity loads, linear modal analysis, and nonlinear static analysis (Push Over) were carried out in order to assess the seismic capacity of the structure. A check of local out-of-plane failure mechanisms was also performed to verify if the structure is able to attain a global behavior. Problems and solutions related to the different methods are presented and discussed.     

Lessons Learned from Seismic Analysis of a Seven-Story Concrete Test Building

A uniaxial shake table test of a full-scale slice of a seven-story reinforced concrete wall building was performed at the University of California, San Diego. A 2D analytical model that primarily employed fiber-based beam-column elements was used for a blind prediction of the global response of the building to the imposed input accelerations. An improved analytical model, which adequately simulates the building's dynamic response and comparison of measured and analytical results, is presented. The lessons learned from participation in the blind prediction with particular attention to the effects of issues commonly ignored in analytical modeling of concrete buildings are included.     

Definition of Seismic Input for Out-of-Plane Response of Masonry Walls: I. Parametric Study

Response of masonry walls to out-of-plane excitation is a complex, yet inadequately addressed theme in seismic analysis. The seismic input expected on an out-of-plane wall (or a generic “secondary system”) in a masonry building is the ground excitation filtered by the in-plane response of the walls and the floor diaphragm response. More generally, the dynamic response of the primary structure, which can be nonlinear, contributes to the filtering phenomenon. The current article delves into the details and results of several nonlinear dynamic time-history analyses executed within a parametric framework. The study addresses masonry structures with rigid diaphragm response to lateral loads. The scope of the parametric study is to demonstrate the influence of inelastic structural response on the seismic response of secondary systems and eventually develop an expression to estimate the seismic input on secondary systems that explicitly accounts for the level of inelasticity in the primary structure in terms of the displacement ductility demand. The proposed formulation is discussed in the companion article.     

Statistical Characterization of Structural Demand under Earthquake Loading. Part 2: Robust Estimation of the Dispersion of the Data

Performance-based earthquake engineering methodologies often require a probabilistic model of structural demand. Since observations masking the probability distribution of the majority of the data are frequently found, robust estimation methods are proposed to estimate the probabilistic model parameters (i.e., central value and dispersion). The performance of thirty-three robust dispersion estimators is evaluated, for different sample sizes, using the chord rotation, curvature, shear force, and inter-story drift demands obtained after analyzing five reinforced concrete structures under real earthquake records scaled to several intensities. Based on the results, combinations involving dispersion and central value (defined in a companion article) estimators are proposed.