THOUGHTS ON THE UTILITY OF A BIVARIATE‐SPLITTING APPROACH TO OLMEC CERAMIC DATA INTERPRETATION*

A recently resolved debate centred on the interpretation of a major set of INAA data that was based on Olmec ceramics from Mexico. In an attempt to answer questions arising from the debate, this paper discusses the effect of numbers of samples chosen for data interpretation. It also presents interpretations of the ceramic data set based on a bivariate data‐splitting approach and compares the results of this with the multivariate analysis approaches employed by the initial publishers of the data.     

NON‐DESTRUCTIVE ANALYTIC METHOD USING XRF FOR DETERMINATION OF PROVENANCE OF ARCHAEOLOGICAL OBSIDIANS FROM THE MEDITERRANEAN AREA: A COMPARISON WITH TRADITIONAL XRF METHODS*

A non‐destructive analytical method using wavelength‐dispersive X‐ray fluorescence (WDXRF) that allows the establishment of the provenance of archaeological obsidians was developed and a comparison with the classical XRF method on powders is discussed. Representative obsidian samples of all the geological outcrops of archaeological interest of the Mediterranean area (Lipari, Pantelleria, Sardinia, Palmarola and the Greek islands of Melos and Gyali), were analysed with the normal procedures used in rock analysis by XRF (crushing, powdering and pelletizing). The non‐destructive XRF analysis was instead conducted on splinters taken from the original geological pieces, with the shape deliberately worked to be similar to the refuse usually found at archaeological sites. Since the analysis was conducted on the raw geological fragment, intensity ratios of the suitably selected chemical elements were used, instead of their absolute concentrations, to avoid surface effects due to the irregular shape. The comparison between concentration ratios (obtained by traditional XRF methods) and the intensity ratios of the selected trace elements (obtained from the non‐destructive methodology) show that the different domains of the chemical composition, corresponding to the geological obsidians of the source areas, are perfectly equivalent. In the same way, together with the geological splinters, complete archaeological obsidians, from Neolithic sites, may be analysed and their provenance may be determined. The proposed non‐destructive method uses the XRF method. Due to its sensitivity, low cost and high speed, it is surely an extremely valid instrument for the attribution of the provenance of the archaeological obsidian from Neolithic sites.     

DISCOVERY,PRODUCTION AND USE OF TIN‐BASED OPACIFIERS IN GLASSES,ENAMELS AND GLAZES FROM THE LATE IRON AGE ONWARDS: A REASSESSMENT*

Tin‐based opacifiers (lead stannate yellow and tin oxide white) were first used in glass production for a short period in Europe from the second to the first centuries bc , and then again throughout the Roman and Byzantine Empires from the fourth century ad onwards. Tin oxide was also used in the production of Islamic opaque glazes from the ninth century ad , and subsequently in enamels applied to Islamic and Venetian glasses from the 12th century ad onwards. A selection of published analytical data for the tin‐opacified glasses, enamels and glazes is summarized, and the methods used in their production are reassessed. The phase transformations occurring when mixtures of lead oxide, tin oxide and silica are fired are investigated with high temperature X‐ray diffraction (XRD) using a synchrotron radiation source, and these results are used to explain the observed differences in the glass, enamel and glaze compositions. Possible reasons for the use of tin‐based opacifiers in the second to first centuries bc , and for the switch from antimony‐ to tin‐based opacifiers in the fourth century ad are suggested, and the possible contexts in which tin‐based opacifiers might have been discovered are considered. The introduction of tin‐opacified glazes by Islamic potters in the ninth century ad is discussed in terms of technological transfer or independent invention.     

GLAZED CERAMIC MANUFACTURING IN SOUTHERN TUSCANY (ITALY): EVIDENCE OF TECHNOLOGICAL CONTINUITY THROUGHOUT THE MEDIEVAL PERIOD (10TH–14TH CENTURIES)*

Archaeometric investigation allowed the characterization of two important classes of ceramics: ‘vetrina sparsa’ and ‘invetriata grezza’. Their archaeological peculiarity makes them particularly suited for tracing the evolution of glaze manufacturing in southern Tuscany throughout the medieval period (10th–14th centuries). These ceramics were found in different sites of historical importance, and also from a mining perspective. Local copper, lead, zinc and iron mineralizations supported the growth of several settlements in the vicinity of the mines. The many castles and different archaeological finds (ceramics, glazed ceramic, slag etc.) attest to the intense mineral exploitation of the area from at least the first millennium bc up to the modern period. In light of these geological and archaeological characteristics, archaeometric investigation was intended to provide insight into ancient technical knowledge of ceramic glazing and to determine the source area for raw materials in the medieval period (10th–14th centuries). Ceramic bodies were analysed through OM, XRDp, SEM–EDS and XRF, while coatings were investigated through SEM–EDS. Mineralogical, petrographic and chemical analyses revealed slightly different preparation and firing processes for the two classes of ceramics. These data suggest the continuity through the centuries of the ‘vetrina sparsa’ and ‘invetriata grezza’ production technology. The mineralogical phases, such as monazite, xenotime, zircon, barite, Ti oxide, ilmenite, titanite, tourmaline and ilvaite, and the lithic (intrusive and volcanic) fragments detected within the ceramic bodies suggest a source area in the vicinity of the Campiglia mining district. Lastly, the presence of Cu–Zn–Pb (Ag) and Fe sulphide mineralizations (materials used to produce glaze) in the area supports the hypothesis of local manufacture.     

DISCOVERY AND CHARACTERIZATION OF AN UNKNOWN BLUE‐GREEN MAYA PIGMENT: VESZELYITE*

Blue‐green mosaic and polychrome masks and funerary offerings from the royal tombs of Calakmul, Mexico, were analysed by scanning electron microscope equipped with energy dispersive X‐ray spectroscopy (SEM‐EDS), X‐ray diffraction (XRD), and particle induced X‐ray emission (PIXE). This led to the first identification of the use of veszelyite, a rare hydrated copper‐zinc phosphate, as green pigment. Analyses of a geological sample of this mineral have been done to confirm the characterization of this Mayan pigment, which might help determine pre‐Columbian trade routes of precious and luxury objects in the ancient Maya Classic period (ad 250–800).     

ACCESSING PAST BELIEFS AND PRACTICES: THE CASE OF LEMNIAN EARTH*

Lemnian Earth, a medicine in the shape of a stamped clay tablet (sphragis) from Lemnos, northeastern Greece, was much valued in antiquity and in the post‐medieval period as an antidote to poison and a treatment for other ailments. Although it was among the first archaeological materials to be subjected to chemical analysis (in 1807), there is still no clear understanding as to what made Lemnian Earth an effective medicine. We argue that Lemnian Earth, the artefact, was not the same as Lemnian Earth, the raw material. We suggest a composition for the artefact by scrutinizing the documentary evidence for its properties and by considering the geochemical processes that led to the formation of the raw material and the ritual relating to its extraction. The study of the latter highlights the need for archaeological materials scientists to recognize ritual as a possible manifestation of physical and chemical processes carried out within the framework of past beliefs and practices.     

ANALYSING ARCHAEOLOGICAL BASALT USING NON‐DESTRUCTIVE ENERGY‐DISPERSIVE X‐RAY FLUORESCENCE (EDXRF): EFFECTS OF POST‐DEPOSITIONAL CHEMICAL WEATHERING AND SAMPLE SIZE ON ANALYTICAL PRECISION*

Energy‐dispersive X‐ray fluorescence (EDXRF) has been commonly used to determine geological sources of volcanic glass artefacts, but its ability to discriminate between basaltic sources is less developed. We examine the precision and accuracy of non‐destructive EDXRF for basalt artefacts by analysing varying size and weathering characteristics. The experiments identified no appreciable effect in reproducibility or measured composition due to thickness (down to 1 mm) or natural weathering of pre‐contact flake scars for the 17 elements measured in this study. Samples with surface area less than 100 mm², however, show significant variability in measured composition and reproducibility.     

Preservation of old‐growth forests: a case study of Big Timber Park,Whistler, BC

This paper explores the concepts of old‐growth forests, preservation and natural disturbance and demonstrates how contemporary biogeographic theory contributes to successful preservation of old‐growth forests. The case study analyzes the composition, structure, age and growth histories of trees in Big Timber Park, Whistler, British Columbia. Composition. The structure of the forest was diverse and tree ages ranged from 122 to 305 years. The densities of large old Douglas‐fir, shade‐tolerant trees and all snags are indicative of old‐growth forests; however, maximum tree diameters and densities of large snags and logs do not meet quantitative criteria for old‐growth forests. The abundance of tree regeneration and understory vegetation are relatively low. We conclude that some aspects of Big Timber Park are transitional between the mature and old‐growth stages of forest development. In the future, fine‐scale canopy gaps caused by tree senescence and interactions among insects, pathogens and wind are expected to dominate stand dynamics. Forest structure will become increasingly complex, exemplifying the dynamic nature of old‐growth forests. To successfully preserve Big Timber Park and La préservation des forêts other old‐growth forests in Canada requires understanding of natural disturbances. Preservation and the criteria and indicators used to measure successful preservation must explicitly include elements of natural change.     

Differences in hi‐tech immigrant earnings and wages across Canadian cities

This paper examines the relative earnings and wages of immigrants working in the hi‐tech sector in Canada's cities. Between 1990 and 2000, a sizeable earnings advantage of immigrants over nonimmigrants employed in the hi‐tech sector evaporated, and this change was most noticeable in the largest cities. We use population census microdata to examine the geographical dimensions of this shift. After controlling for individual characteristics, we show that immigrants in the largest and tech‐intensive cities earn significantly less relative to nonimmigrants than those in midsized and smaller cities. We also present results comparing the hi‐tech immigrant wage and earnings gap for the five largest Canadian cities. The findings are consistent with the notion that geographic differences are an important component of the overall earnings gap between immigrants and nonimmigrants.     

Cutting Through Topologies: Crossing Lines at the School of the Americas

Abstract: The School of the Americas (SOA) is a U.S. Army school that trains Latin American military officers. Manuals released detail torture techniques once taught at the school, and thousands of graduates have been linked to human rights abuses. The annual vigil in front of Fort Benning is the largest ongoing protest and civil disobedience against U.S. imperialism being held within the U.S. The movement to close the SOA traces the twisted lines of the topology that shapes spaces of exception in Latin America. It traces those lines back to the SOA, and cuts through them with its own counter‐topographical lines of connection to those Latin Americans that are made into ‘bare life’ by those topologies. This essay looks at the doings of protest space as a form of resistance to the space of exception, and how personal stories, and mourning, can put us beside ourselves, with one another.