Scalar Structure-Specific Ground Motion Intensity Measures for Assessing the Seismic Performance of Structures: A Review

The assessment of the seismic performance depends on the choice of the earthquake Intensity Measure (IM). During the past years many IMs, which take into account not only earthquake characteristics but also structural information, have been proposed. However, no consensus on which IM is the best predictor of the seismic response exists. Along these lines, the objective of this paper is to present the various developed scalar structure-specific seismic IMs and the problems associated with their use in practice, so that the engineer may become familiar with them and their implications in the context of Performance-Based Earthquake Engineering.     

PROVENANCING AND ARCHAEOLOGY OF ROMAN MILLSTONES FROM SARDINIA (ITALY)

Summary. Sardinia was an important Roman settlement and trade centre between 238 BC–500 AD and is an ideal site for study of Roman trade. Study of Roman millstones in Sardinia shows that the commonest type is the Pompeian (hour-glass) mill (forty-eight stones studied), with smaller numbers of cylindrical hand querns (sixteen stones studied). Most of these millstones are composed of igneous rocks which include grey vesicular lavas of basic/intermediate composition and a distinctive reddish rhyolitic ignimbrite. There is historical and archaeological evidence for millstone manufacture at six localities in Sardinia. Visual and petrographic study and X-ray fluorescence analysis for major and trace elements of seventeen millstone samples, and fifty rock samples from potential source areas have been used to provenance the igneous rock millstones. The grey vesicular lava millstones have varied sources within the Tertiary-Recent volcanic rocks of Sardinia, while the millstones composed of rhyolitic ignimbrite are from a single source of Tertiary ignimbrite at Mulargia (central west Sardinia). A single hand mill from the north of Sardinia was imported probably from Agde in southern France, and is the only sample composed of non-local rock. Mulargia millstones were widely traded within the western Mediterranean and show a rapid decrease in frequency of occurrence with increasing distance from the source. Sardinia was therefore an important centre of Roman millstone production and a source of millstone trade during the period of Roman settlement.     

Poaceae phytoliths from the Niassa Rift,Mozambique

The most common grass phytoliths from “Zambezian” miombos are described here for the first time. Their potential for long term preservation in sediments makes them a useful tool in the reconstruction of ancient plant communities and plant/human interactions. We processed 60 plant samples (26 identified genera and species), with an average of 300 phytoliths counted per sample to a total of 18,586. Forty-seven morphotypes were described as per the International Code for Phytolith Nomenclature, with exceptions, including forty-five discreet shapes and two articulated forms, which can be used as comparative reference materials. We conducted three forms of statistical analyses: Discriminant Analysis, Cluster Analysis, and Principal Component Analysis. The highest biomineral content was recorded among the Bambuseae and Paniceae, while the lowest silica production is detected in the Cynodonteae tribe. Typologically, the subfamily Panicoideae yielded 50% of the types reported here, 32% are from the Chloridoideae, 12% from the Bambusoideae, and 8% from the Arundinoideae sensu lato. Overall, the idealized Zambezian Poaceae phytolith spectrum is dominated by a small subset of Poaceae short cells, which include five morphotypes conventionally associated with Panicoid grasses (Bilobate concave outer margin long shaft, Bilobate concave outer margin short shaft, Bilobate convex outer margin long shaft, Bilobate convex outer margin short shaft, Cross), one morphotype commonly seen in Chloridoid taxa (saddle), and two types that appear across subfamily boundaries (tower, tower horned). The next logical step to take in regional phytolith research is the account of phytoliths deposited in soils underneath living plants, for they represent the interface between existing vegetation communities and the inevitably distorted fossil assemblages that the paleobotanist uses for environmental reconstruction.     

Production centers of cooking pots in Iron Age Judah

This paper will present and discuss a multifaceted research project dealing with the production of cooking pots during the Iron Age II (ca. 1,000–586 BCE) Judah (modern Israel). In particular the new compositional analysis of 541 cooking vessels from 11 sites in Iron Age Judah will be presented. The study employs petrographic and chemical (NAA) analysis. The results of this ongoing research have already produced interesting information about production centers and movements of cooking pots in Iron Age II Judah. Apparently, the vast majority of the cooking pots sampled were made of a similar type of clay, related to terra rossa soil. This is true also for sites in the northern Negev and Judean Desert, where the type of soil was not available in the region of the sites. Furthermore, many of the cooking pots distributed around Judah were made in Jerusalem according to a well-located chemical profile (JleB). Other groups may represent Judean Shephelah production centers as the Lachish area as well as production centers in southern Israel or ancient Edom. The implications of the importation patterns of cooking pots by peripheral Judean sites will be discussed.     

左江流域种植业区划

左江流域六县(市)地处桂西南喀斯特地区,区内农业资源和生产水平各有差异。为了配合该地区经济的全面开发,我们收集了该地区七十一个行政乡农业生产有关的特征数据,运用数学的方法--聚类分析法和电子计算机技术,对该地区农业的空间布局进行合理调整--种植业类型区划分,并分别论述各类型区的特点及今后发展方向。为该地区今后在农业生产上做到宜地适种、扬长避短,并在此基础上向区域化、集约化的农业迈进提供科学依据。     

Applying bootstrapped Correspondence Analysis to archaeological data

This paper examines the usefulness of bootstrapping in Correspondence Analysis when applied to archaeological data. By simulating and displaying possible variation within the data sets, bootstrapping provides us with a means to assess the stability of our CA maps and influences the interpretations we can place upon them. Five real data sets are examined and the results discussed. The paper concludes that bootstrapping is a useful and powerful way of examining the results of CA and should be employed on a regular basis.     

Materials Characteristics of Roman and Arabic Mortars and Stuccoes from the Patio De Banderas in the Real Alcazar of Seville (Spain)

This study discusses the materials and traditional knowledge used in the manufacture and application of lime mortars and stuccoes by Romans and Arabs in Seville (southern Iberian Peninsula). All of the samples studied contain calcite as a binder, combined with aggregates based on river sand from the filling materials of the Guadalquivir River's depression, located in the vicinity of the Real Alcazar Palace in Seville, Spain, where the artefacts were discovered. The Romans used high‐quality production technology, as evidenced by the careful selection of raw materials as well as by the adequate binder‐to‐aggregate ratio and the elevated homogeneity of the mortars and stuccoes. The suitable distribution of aggregates resulted in higher density values for Roman fragments than for Arabic ones. Results derived from Arabic samples suggest a decline in technology manufacture over time. This work provides useful information, particularly regarding the Roman and Arabic periods in the Iberian Peninsula. The analytical techniques employed in this study were X‐ray diffraction (XRD), X‐ray fluorescence (XRF)—using conventional and portable systems, scanning electron microscopy (SEM), petrographic microscopy, differential thermal analysis/thermogravimetry (DTA/TG), particle‐size analysis and mercury intrusion porosimetry.     

Coalition Structures and Policy Change in a Consensus Democracy

This paper studies the relation between coalition structures in policy processes and policy change. While different factors such as policy images, learning processes, external events, or venue shopping are important to explain policy change, coalition structures within policy processes are often neglected. However, policy change happens as a result of negotiations and coordination among coalitions within policy processes. The paper analyzes how conflict, collaboration, and power relations among coalitions of actors influence policy change in an institutional context of a consensus democracy. Empirically, I rely on a Qualitative Comparative Analysis to conduct a cross‐sector comparison of the 11 most important policy processes in Switzerland between 2001 and 2006. Coalition structures with low conflict and strong collaboration among coalitions as well as structures with dominant coalitions and weak collaboration both facilitate major policy change. Competing coalitions that are separated by strong conflict but still collaborate strongly produce policy outputs that are close to the status quo.     

Eighteenth‐Century Meissen Porcelain Reference Data Obtained By Proton‐Beam Analysis (PIXE–PIGE)

Prior to their restoration, the porcelain bodies of broken pieces from 31 authentic Meissen objects of the early 18th century were investigated by proton‐beam analysis. Attention was paid so that the proton beam probed only the bare porcelain paste areas of fractures. Thus, contributions to the measured X‐ray and γ‐ray spectra from adjacent surface glaze were prevented. The chemical compositions, obtained by simultaneous detection of elements with Z ≥ 13 (X‐rays) and lighter elements Z ≤ 14 (γ‐rays), represent rather consistent mixtures of paste ingredients. This result highlights the durable recipes and raw materials used in early Meissen porcelain production in the years 1725–50. Mean concentration values of element oxides, deduced from the detailed measurements, prove suitable for use as a database for Meissen porcelain paste identification. Material authentication of intact objects, without access to the bare porcelain body, is demonstrated by inspection of the white glaze. Unique museum objects are examined in atmosphere and without sampling. A low proton‐beam intensity and a short irradiation time ensure non‐destructive analysis. Simultaneous radiation and backscattered particle detection allow complete composition analysis, using the established ion beam techniques of particle‐induced X‐ray emission (PIXE), particle‐induced gamma‐ray emission (PIGE) and Rutherford backscattering spectrometry (RBS).     

Beyond the ICF: Italian network strategies for job placement of persons with disabilities

The Second National Conference on Disability, held in Bari in 2003, took the World Health Organization's International Classification of Functioning, Disability and Health (ICF), adopted by all WHO member states in 2001, as its frame of reference for future action and policies on disability. The ICF broke decisively with the medical model by seeing disability as an interaction between a biological and psychological condition and environmental and attitudinal barriers. Although existing Italian legislation on access to work for persons with disabilities, particularly Law 68/1999 on ‘collocamento mirato’ (targeted placement), anticipated some of the principles and definitions of the ICF, its implementation in practice was often snared in complex bureaucratic procedures and compromised by narrowly medical assessments of impairment and by considerable variations in standard from region to region. In 2009–2011 a pilot project, Progetto ICF4, was launched in 11 regions of Italy. It applied ICF principles, using Social Network Analysis (SNA) to assess the suitability of a work environment in terms of the networks of relations between the different actors involved in it. The way this has functioned in practice is illustrated by a case study of Teramo, one of the provinces in the pilot.