Approximate Methods for Estimating Hysteretic Energy Demand on Plan-Asymmetric Buildings

The first step in a hysteretic energy-based design approach of performance-based design is the estimation of hysteretic energy demand in the structure. A nonlinear response-history analysis of the multi-degree of freedom model gives an accurate estimation, but it is not suitable for adopting in design. Two alternative methods, based on the concepts of modal pushover analysis (MPA) and 2D-MPA, are proposed in this article for uniaxial plan-asymmetric structures. Application studies show that both methods are efficient. While the 2D-MPA-based method is more accurate, the MPA-based method is more suitable for design adoption. Significant conclusions are given for prospective application of these methods.     

Numerical Fragility Analysis of Vertical-Pile-Supported Wharves in the Western United States

This study develops seismic fragility curves for vertical-pile-supported wharves commonly found in the western United States. Nonlinear time-history analyses of a two-dimensional numerical model under two ground motion suites are performed. The results show that the jumbo container cranes increase by 10.8% in the wharf deck drift. By using the experiment-based limit states, the proposed fragility curves demonstrate that, at a PGA of 0.50 g, the probabilities of exceeding slight, moderate, extensive, and complete limit states are approximately 23.0%, 7.0%, 4.0%, and 3.0%, respectively, while at a PGA of 1.00 g, the exceeding probabilities increase to 44.0%, 19.0%, 14.0%, and 11.0%, respectively.     

A Modified Capacity Spectrum Method with Direct Calculation of Seismic Intensity of Points on Capacity Curve

A direct methodology for solving the seismic intensity of each point on the capacity curve is proposed. By utilizing the procedure, a continuous curve between the structural response and the seismic intensity, the structural response function, can be easily generated. Unlike previous procedures that search for the performance point of a determined seismic intensity, the proposed methodology easily draws the full curve without iterations. The procedure is applicable to both a smooth design spectrum and an actual response spectrum. Examples indicate the methodology is accurate and fast, and convenient to be combined with existing procedures, such as Modal Pushover Analysis.     

Applicability of Pushover Methods to the Seismic Analyses of an RC Bridge,Experimentally Tested on Three Shake Tables

The applicability of different pushover methods was analyzed on the example of a bridge, which was experimentally tested on three shake tables at the University of Nevada, Reno. The response of the bridge was quite complex. The intensity as well as the direction of the deck torsional rotations varied significantly, depending on the seismic intensity. At the low intensities, all the employed pushover methods estimated the displacements of the deck very well. In the case of strong earthquakes, the advantages of multi-mode and adaptive methods was demonstrated.     

Seismic Demand on Shear Panel Dampers Installed in Steel-Framed Bridge Pier Structures

This study is aimed at investigating the demand on shear panel dampers (SPDs) installed in steel structures under strong earthquake motions to serve as guidance for the recommended capacity of SPDs in seismic design. For this purpose, an extensive dynamic analysis is carried out on steel bridge pier structures with SPD devices. To describe the restoring force characteristics of SPDs, the analysis uses a newly developed combined hardening model based on experimental data. The seismic demands made on SPD devices are examined and then summarized to give recommended values for determining the necessary deformation capacity of SPDs.     

Numerical Investigation of Residual Strength and Energy Dissipation Capacities of Corroded Bridge Members Under Earthquake Loading

Recent damage examples of aged steel bridge infrastructures around the world are so alarming. They intensified the importance of careful evaluation of existing structures for the feasibility of current usage and to ensure public safety. Corrosion and fatigue cracking may be the two most important types of damages in aging structures. Furthermore, recent earthquakes demonstrated potential seismic vulnerability of some types of steel bridges. Corrosion and its effects can trigger the damages caused by earthquakes, and it will be vital to understand the behavior of existing steel bridges which are corroding for decades in future severe seismic events as well. This article comprises the results of nonlinear FEM analysis of many actual corroded plates with different corrosion conditions and proposes a simple and reliable methodology to estimate remaining seismic strength and energy dissipation capacities by measuring only the minimum thickness of a corroded surface, which can be used to make rational decisions about the maintenance management plan of steel infrastructures.     

Shake Table Test and Numerical Analysis of a Bridge Model Supported on Elastomeric Pad Bearings

Elastomeric pad bearings are widely applied in short- to medium-span girder bridges in China, with the superstructure restrained by reinforced concrete (RC) shear keys in the transverse direction. Field investigations after the 2008 Wenchuan earthquake reveal that bearing systems had suffered the most serious damage, such as span falling, bearing displaced, and shear key failure, while the piers and foundations underwent minor damage. As part of a major study on damage mechanism and displacement control method for short- to medium-span bridges suffered in Wenchuan earthquake, a 1:4 scale, two-span bridge model supported on elastomeric pad bearings were recently tested on shake tables at Tongji University, Shanghai. The bridge model was subjected to increasing levels of four seismic excitations possessing different spectral characteristics. Two restraint systems with and without the restraint of RC shear keys were tested. A comprehensive analytical modeling of the test systems was also performed using OpenSees. The experimental results confirmed that for the typical bridges on elastomeric pad bearings without RC shear keys, the sliding effect of the elastomeric pad bearings plays an important role in isolation of ground motions and, however, lead to lager bearing displacement that consequently increases the seismic risk of fall of span, especially under earthquakes that contain significant mid-period contents or velocity pulse components. It is suggested from the test results that RC shear keys should be elaborately designed in order to achieve a balance between isolation efficiency and bearing displacement. Good correlation between the analytical and the experimental data indicates that the analytical models for the bearing and RC shear key as well as other modeling assumptions were appropriate.     

Study on Low-Frequency Characterizations of Pulse-Type Ground Motions through Multi-Resolution Analysis

This article makes an attempt to investigate the low-frequency characterizations of pulse-type ground motions through ground motion components instead of original records. A decomposed method based on multi-resolution analysis is introduced in this article. The accuracy and validity of the method is tested in frequency domain, time domain and dynamic response. A dataset of 398 low-frequency components is obtained after the decomposition of 91 typical pulse-type records. A probabilistic model to describe the proportion of low-frequency components in corresponding original ground motions is established. At last, the decomposed method is used to investigate the impulsive characterizations of pulse-type ground motions.     

A Method for Selecting Ground Motions that Considers Target Response Spectrum Mean and Variance as Well as Correlation Structure

This study proposes a method for selecting ground motions from a ground motion library with response spectra that match the target response spectrum mean, variance, and correlation structures. The proposed method is conceptually simple and straightforward. In this method, a desired number of ground motions are sequentially selected from first to last. The accuracy and consistency of the proposed method are verified through comparisons of the ground motions selected using the proposed method with those selected using conventional methods. This study shows that the seismic responses of the frames vary according to ground motion selection and correlation structures.