CATHODOLUMINESCENCE OF WHITE MARBLES: AN OVERVIEW*

Identifying the source area of white marbles has long been a problem in archaeology. To address this problem, about 1000 samples from known Classical quarrying areas in Greece, Italy and Turkey were analysed using cathodoluminescence. Twenty-one cathodomicrofacies were recognized, each of which generally characterizes a given area. In cases where the cathodomicrofacies is common to more than one area, δ¹³C and δ¹⁸O signatures provide an effective complementary dataset which allows additional distinctions. Determination keys for the 21 cathodomicrofacies observed are proposed based upon their principal cathodoluminescence colour, and their stable isotopic signature.     

PROVENANCE DETERMINATION OF NEOLITHIC TO CLASSICAL MEDITERRANEAN MARBLES BY STABLE ISOTOPES*

Two stable isotopic data bases for ?¹³C and ?¹⁸O values of marble have been accumulated: (1) 590 analyses from 42 Classical quarries of Greece, western Turkey, Tunisia, and Carrara, Italy, and (2) potential Early Bronze Age (EBA) marble sources in the central Cyclades, comprising 192 analyses from 16 sites on the islands of Paros, Naxos, Ios, and Keros. The data bases include the most important marble occurrences in the eastern Mediterranean and so can be used to source artefacts of any age. Neolithic artefacts found at Franchthi Cave, where no marble occurs locally, have been attributed to the Peloponnese and the Cyclades, direct evidence for early trade. In the Cycladic EBA, Naxos and Keros were the principal marble sources for the abundant artefacts found at Keros. The commercial marble trade in Archaic Greece began in the central Cyclades where the tradition apparently went back some 5000 years, to the Neolithic. Classical Greece and especially Rome expanded the number and locations of commercial marble sources throughout the Mediterranean.     

CALCIUM ISOTOPES IN JUVENILE MILK‐CONSUMERS

The calcium isotope ratios (δ^44/42Ca) in milk‐consuming infants and juveniles are compared to adults at two archaeological sites to test whether milk consumption is detectable in the skeleton using calcium isotopes. At A??kl? Höyük, δ^44/42Ca is correlated with δ¹⁵N and differs significantly between juveniles and adults, suggesting that δ^44/42Ca is responding to dietary milk input. However, at Christ Church, Spitalfields, no correlation between δ^44/42Ca and δ¹⁵N or age is noted. At this site, δ^44/42Ca of adult females is not related to the minimum number of births, and we conclude that the maternal skeleton is not sufficiently isotopically perturbed for this signal to remain throughout her lifetime. Growth may result in an increase in very young infants' δ^44/42Ca, in contrast to an expected decrease due to milk consumption, complicating the interpretation of the data. We conclude that milk consumption does not always result in a change in skeletal δ^44/42Ca, or is masked by other effects.     

PREHISTORIC COPPER PRODUCTION IN THE INN VALLEY (AUSTRIA), AND THE EARLIEST COPPER IN CENTRAL EUROPE*

In recent years archaeological finds and scientific analyses have provided increasing evidence for a very early beginning of copper production in the rich mining area of the Tyrolean Alps. The earliest findings derive from an excavation of a multi‐phase settlement on the Mariahilfbergl in Brixlegg, which revealed evidence that a small amount of fahlores, probably of local provenance, was at least heated if not even smelted there in the Late Neolithic Münchshöfen culture (the second half of the fifth millennium bc ). However, most copper finds of this horizon consist of low‐impurity copper that most probably derives from Majdanpek in Serbia. This long‐distance relationship is corroborated by typological features that link some aspects of the Münchshöfen culture with the Carpathian basin. Thus it is not yet clear if, at Brixlegg, actual copper production took place or, rather, an experimental treatment of the local ores. The typical fahlore composition, with arsenic and antimony in the per cent and silver and bismuth in the per mille ranges, appears in quantity only in the Early Bronze Age. Many thousands of Ösenringe are known from many central European Early Bronze Age sites, with a chemical composition typical of fahlores. At Buchberg near Brixlegg, a fortified settlement with slags from fahlore smelting proves that the local ores were indeed exploited. The lead isotope ratios of Ösenringe from the Gammersham hoard in Bavaria, which consist of fahlore copper, confirm this and suggest that copper mining and production in the Inn Valley reached a first climax during that period. In the Late Bronze Age, copper was produced at an almost industrial level.     

THE PROVENANCE OF IRON ARTEFACTS FROM MANCHING: A MULTI‐TECHNIQUE APPROACH*

Iron finds from the Celtic oppidum of Manching in southern Bavaria (Germany) are analysed in view of their possible provenance. The exceptional size and the location of Manching are usually attributed to the presence of abundant iron ores in its vicinity. After a review of previous approaches for source determination of iron artefacts, we introduce lead isotope analysis as a new approach. However, only by combining the trace element patterns of slag inclusions and iron metal with lead isotope ratios in the metal is it possible to distinguish various iron ore formations near Manching. As a result, it turns out that, indeed, the most obvious ones—namely, bog ores near the Danube—constituted the main resources for iron production at Manching. It was even possible to select one occurrence as the most likely ore source.     

PATTERNS OF IRON AGE HORSE SUPPLY: AN ANALYSIS OF STRONTIUM ISOTOPE RATIOS IN TEETH*

This paper presents a pilot study of strontium (Sr) isotope ratios from Iron Age horse tooth enamel samples. It compares ⁸⁷Sr/⁸⁶Sr ratios from horse teeth to estimates for local ranges of biologically available strontium, to investigate whether horses were being bred at the sites where their remains were discovered. A horse from Middle Iron Age Rooksdown, Hampshire, was not bred at the site but, rather, came from as far away as Wales, Scotland or continental Europe. Horse teeth from Middle Iron Age Bury Hill, Hampshire, returned ⁸⁷Sr/⁸⁶Sr values typical of local chalkland.     

How Did Mississippians Prepare Maize? The Application of Compound‐Specific Carbon Isotope Analysis to Absorbed Pottery Residues From Several Mississippi Valley Sites

A newly developed compound‐specific stable carbon isotope technique allows the detection of maize in absorbed organic pottery residues. This method was applied to absorbed organic residues from a variety of Mississippi Valley potsherds, and successfully identified maize components. Maize was cooked in sampled vessels less often than expected, but otherwise fitted expected patterns of maize use derived from stable carbon isotope analysis of human bone from the region. Absorbed organic pottery residue analysis is useful in determining pottery use, particularly in concert with other analytical methods.     

INVESTIGATION ON ROMAN LEAD GLAZE FROM CANOSA: RESULTS OF CHEMICAL ANALYSES*

Five sherds of green glazed pottery excavated at Canosa (Apulia) in Italy have been analysed by scanning electron microscopy. The aim of the investigation was to determine the chemical composition of the glazes and thus obtain information on the methods used in their production. The glazes were all of the high‐lead type, coloured green by the addition of copper. Intermediate layers, observed at the interface between the glaze and body and giving the appearance of an applied white slip, were the result of the crystallization of lead feldspar from the molten glaze. Non‐calcareous clays were used in the production of the pottery bodies. Concentration profiles from the glaze exterior to the body suggested that the glazes were produced by applying a suspension consisting of lead oxide plus silica to the bodies. On the basis of the glaze and body compositions, it is suggested that the Canosa glazed pottery was produced locally.     

DISCOVERY,PRODUCTION AND USE OF TIN‐BASED OPACIFIERS IN GLASSES,ENAMELS AND GLAZES FROM THE LATE IRON AGE ONWARDS: A REASSESSMENT*

Tin‐based opacifiers (lead stannate yellow and tin oxide white) were first used in glass production for a short period in Europe from the second to the first centuries bc , and then again throughout the Roman and Byzantine Empires from the fourth century ad onwards. Tin oxide was also used in the production of Islamic opaque glazes from the ninth century ad , and subsequently in enamels applied to Islamic and Venetian glasses from the 12th century ad onwards. A selection of published analytical data for the tin‐opacified glasses, enamels and glazes is summarized, and the methods used in their production are reassessed. The phase transformations occurring when mixtures of lead oxide, tin oxide and silica are fired are investigated with high temperature X‐ray diffraction (XRD) using a synchrotron radiation source, and these results are used to explain the observed differences in the glass, enamel and glaze compositions. Possible reasons for the use of tin‐based opacifiers in the second to first centuries bc , and for the switch from antimony‐ to tin‐based opacifiers in the fourth century ad are suggested, and the possible contexts in which tin‐based opacifiers might have been discovered are considered. The introduction of tin‐opacified glazes by Islamic potters in the ninth century ad is discussed in terms of technological transfer or independent invention.     

GLAZED CERAMIC MANUFACTURING IN SOUTHERN TUSCANY (ITALY): EVIDENCE OF TECHNOLOGICAL CONTINUITY THROUGHOUT THE MEDIEVAL PERIOD (10TH–14TH CENTURIES)*

Archaeometric investigation allowed the characterization of two important classes of ceramics: ‘vetrina sparsa’ and ‘invetriata grezza’. Their archaeological peculiarity makes them particularly suited for tracing the evolution of glaze manufacturing in southern Tuscany throughout the medieval period (10th–14th centuries). These ceramics were found in different sites of historical importance, and also from a mining perspective. Local copper, lead, zinc and iron mineralizations supported the growth of several settlements in the vicinity of the mines. The many castles and different archaeological finds (ceramics, glazed ceramic, slag etc.) attest to the intense mineral exploitation of the area from at least the first millennium bc up to the modern period. In light of these geological and archaeological characteristics, archaeometric investigation was intended to provide insight into ancient technical knowledge of ceramic glazing and to determine the source area for raw materials in the medieval period (10th–14th centuries). Ceramic bodies were analysed through OM, XRDp, SEM–EDS and XRF, while coatings were investigated through SEM–EDS. Mineralogical, petrographic and chemical analyses revealed slightly different preparation and firing processes for the two classes of ceramics. These data suggest the continuity through the centuries of the ‘vetrina sparsa’ and ‘invetriata grezza’ production technology. The mineralogical phases, such as monazite, xenotime, zircon, barite, Ti oxide, ilmenite, titanite, tourmaline and ilvaite, and the lithic (intrusive and volcanic) fragments detected within the ceramic bodies suggest a source area in the vicinity of the Campiglia mining district. Lastly, the presence of Cu–Zn–Pb (Ag) and Fe sulphide mineralizations (materials used to produce glaze) in the area supports the hypothesis of local manufacture.