Estimating the Seismic Performance of CFRP-Retrofitted RC Beam-Column Connections Using Fiber-Section Analysis

Over the past two decades, many experimental techniques have been developed to improve the efficiency of the externally-bonded fiber-reinforced polymers (FRPs) in order to improve the structural performance of reinforced concrete (RC) beam-column connections. Numerical analysis is also being used as a cost-effective tool to predict the experimental results and to further investigate the parameters that are beyond the scope and capacity of experimental tests. In this study, at first, a fiber-section modeling approach is developed for estimating the seismic behavior of RC beam-column connections before and after application of FRP retrofits. The accuracy of the analysis results were validated against a series of the available experimental data under both monotonic and cyclic loadings. It was pointed out that the proposed model can predict the strength and displacement of un-retrofitted and FRP-retrofitted RC beam-column connections up to the failure points. The verified model was then used to perform a parametric study pertaining to the effect of longitudinal reinforcement ratio on the efficiency of the adopted FRP retrofitting technique to improve the structural behavior of RC beam-column connections.     

Lapp Cairns as a Source on Metal Period Settlement in the Inland Regions of Finland 1

This article presents an overview of the history of research of the so-called Lapp cairns. On the basis of the limited find material from these cairns, they are assumed to be from the archaeologically poor Iron Age period of the Finnish inland regions. The situation is similar throughout large wilderness areas in northern Europe, and in Norway it has sometimes been called the "findless period" ( den funntomme perioden ). Six so-called Lapp cairns excavated in central Finland in the 1980s and 1990s are discussed in detail. Three of the cairns contained sufficient amounts of burnt bone for testing the new AMS dating method of burnt bone based on crystalline carbonate on Finnish material. As far as is known, these are the first datings of burnt bone in the Finnish material. The oldest Lapp cairn, cairn no. 1 at Pyykkisaari in Viitasaari, is from the end of the Stone Age, and the other two are from the Early Metal Period. This article briefly discusses problems related to defining Lapp cairns, their age and function. The early dating of the Lapp cairns gives new topicality to the prevailing conception that the Lapp cairns resulted from the influence of the cairns of the coastal Bronze Age. The burnt bone from the oldest cairn included the remains of seal. It is possible that these fragments of bone represent relict ringed seal that lived in Lake Keitele in the past.     

THREE DIMENSIONAL NONLINEAR BUILDING POUNDING WITH FRICTION DURING EARTHQUAKES

The three dimensional pounding phenomenon of two adjacent buildings during earthquakes with aligned rigid horizontal diaphragms is investigated for the linear and nonlinear structural response. The developed formulation takes into account three dimensional dynamic contact conditions for the velocities and accelerations based on the impulse-momentum relationship, using the coefficient of restitution e and the ratio μ, of tangential to normal impulses, which corresponds to the coefficient of friction under certain conditions. The contact points are determined geometrically from the displacements of the diaphragms' centre of mass. The results of the proposed formulation are compared with those obtained with the Lagrange multipliers approach. Test results are performed for two sets of multi-storey adjacent buildings subjected to real earth-quake motions with elastic and inelastic structural response.     

Inelastic Displacement Demand of Strength-Degraded Structures

This article presents findings from parametric studies involving nonlinear time-history analyses of inelastic systems with and without strength degradation. Results showed that estimates based on the equal-displacement and equal-energy propositions can be exceeded significantly by the inelastic displacement demands in the acceleration and velocity-sensitive regions of the response spectrum. The displacement demand behaviour is sensitive to the strength degradation and the frequency properties of the ground shaking. With a modest strength reduction factor of 2, the inelastic displacement demand would typically be constrained by the Peak Displacement Demand as indicated on the elastic displacement response spectrum for 5% damping.     

Nonlinear Static and Dynamic Behavior of a 16-Story Torsionally Sensitive Building Designed According to Eurocodes

A 16-story building under construction in Bucharest has been designed according to the provisions of EC2 and EC8, using elastic spectral modal analysis. Considering that the building is torsionally sensitive in the nonlinear range, it was further checked and verified using nonlinear dynamic and static procedures, using a detailed space-frame model. Specifically, time-history analysis for seven different excitations, as well as respective inelastic static analysis taking into account torsional effects were performed. The results are examined regarding structural (global) and member (local) response and various issues concerning the adequacy of the original elastic design and the applicability of advanced analysis methods are discussed.     

Experimental Investigation of Circular Reinforced Concrete Columns under Different Loading Histories

Three reinforced concrete (RC) circular column specimens without an effective concrete cover were tested under constant axial compressive as well as cyclic lateral loading. The seismic behavior of the specimens under different loading paths was examined with the objective of understanding the influence of displacement history sequence on the seismic behavior of the columns in near-fault earthquakes. The influence of displacement history sequence upon the hysteretic characteristics, stiffness degradation, lateral capacity, as well as energy dissipation analysis was conducted. The hoop strains of lateral reinforcement at varied column heights under cyclic loading were attained by means of 8–16 strain gauges attached along the hoops. Additionally, the characteristics of strain distribution were investigated in the transverse reinforcement. The results of strain distribution were evaluated with Mander’s confinement stress model and the distribution around the cross section. The length of the plastic hinge at the end of the specimen was evaluated by measurement as well as the inverse analysis. Finally, the deformation of the specimen, which includes the components of shear deformation, bending deformation and bonding-slip deformation, was evaluated and successfully separated.     

Equivalent Damping Ratio Equations in Support of Displacement-Based Seismic Design for Pile-Supported Wharves

This study primarily proposes new equivalent damping ratio equations based on Jacobsen’s approach for displacement-based seismic design of pile-supported wharves to account for wharf configurations and soil-pile interaction. It is found that Pivot hysteresis model and Masing rule can accurately capture nonlinear behavior of concrete and steel wharves, respectively. To verify applicability of proposed equations, analyses were conducted to three typical wharves to make a comparison of maximum displacements obtained from nonlinear time-history analyses and substitute structure method with various damping equations. The verification reveals proposed equations are better than those in practice for their higher precision in determining displacements.     

Design Principles for Minimum Torsional Response of Wall-Frame Concrete Structures

A seismic design procedure is described incorporating the well-accepted property that the stiffness of reinforced concrete elements is strength dependent and the requirement that the method of assigning strength to elements should be aiming at minimum torsional phenomena. Such a response allows a direct comparison with the findings of a static nonlinear analysis, which may provide the limits of story drifts and the induced plastic rotations in potential plastic hinges. The requirement of a practically translational response implies that the element strength assignment should be based on planar considerations and the initially elastic response should be of minimum torsion.     

Mixed Force and Displacement Control for Testing Base-Isolated Bearings in Real-Time Hybrid Simulation

This paper presents a robust mixed force and displacement control strategy for testing of base isolation bearings in real-time hybrid simulation. The mixed-mode control is a critical experimental technique to impose accurate loading conditions on the base isolation bearings. The proposed mixed-mode control strategy consists of loop-shaping and proportional-integral-differential controllers. Following experimental validation, the mixed-mode control was demonstrated through a series of real-time hybrid simulation. The experimental results showed that the developed mixed-mode control enables accurate control of dynamic vertical force on the base isolation bearings during real-time hybrid simulation.     

行为区位论的初步研究

本文论述了行为区位论的产生和发展历程,分析了区位决策行为、空间位移行为和消费行为空间等模式,并对行为区位论在区位理论中的地位和作用进行了评价。